|
|
Testing of Surge Arresters
Jeřábek, Lukáš ; Paar, Martin (referee) ; Krbal, Michal (advisor)
This bachelor's thesis is devoted to metal oxide surge arresters. After historical and theoretical introduction, which explains their principles and describes their characteristical properties, analysis of the standard IEC 60099-4 and testing according to the standard with focus on the type tests follows. This chapter is also amended with review of the standard's imperfections and with its most probable future development. The work concludes with a market survey, a review of the largest manufacturers and a comparison of their products.
|
|
|
Evaluation Of Temperature Influence on Lead-Acid Battery Properties
Langer, Martin ; Zimáková, Jana (referee) ; Bača, Petr (advisor)
This work deals with lead-acid batteries, their properties and individual types that are available on the market. The temperature dependences of the battery parameters at different ambient temperatures and at different discharging and charging modes are measured here. The theoretical part of the work deals with electrochemical cells in general, description of their main parts and principles of operation. The work analyzes the types of batteries used, their advantages and negatives. In the case of a lead-acid battery, its internal structure and the function of the electrodes and the electrolyte are taken into account. Furthermore, a description of individual possible negative phenomena that take place in lead-acid batteries and contribute to the end of their service life is included. In the practical part, 6 batteries are tested at different charging currents, which provides information about their behavior both during discharge and at the time of charging. During the experiments, testing is not only performed at room temperature, but the batteries are also exposed to high temperatures up to 75 ° C.
|
|
|
Fuel cells and their use
Horák, Stanislav ; Klimeš, Lubomír (referee) ; Štětina, Josef (advisor)
This bachelor’s thesis deals with background research of fuel cells and their use. The first part of this thesis is familiar with the basic principle and fuel cell constructions, as well as the types of fuel cells, with which we meet today. Another part deals with the thermodynamic calculation of the fuel cell including the production of hydrogen. At the end of the thesis are taken into account the advantages and disadvantages of the fuel cells and examples of their use.
|
|
|
Stability of cathode materials for Li-ion accumulators
Janíček, Zdeněk ; Libich, Jiří (referee) ; Sedlaříková, Marie (advisor)
This diploma thesis focuses on study of positive electrode materials for Li-Ion batteries. Our aim are intercalation materials whose are really perspective materials whose are widely used in this case. The theoretical part of my thesis focus on basic study of Li-ion batteries and their parameters. We studied charging and discharging processes. AFM and SEM were used as additional techniques for study LiCoO2 a Li0,975K0,025CoO2. We tested lifetime and stability of electrode as a perspective material for electrode for Li-ion batteries.
|
|
|
The influence of iron on nickel accumulator charging
Mičák, Tomáš ; Čech, Ondřej (referee) ; Pléha, David (advisor)
This bachelor's thesis is dealing with a problematics of iron influence on charging of accumulator, more precisely on its cathode. The theory describes comparision of an accumulators at our market, important properties of Ni-Cd accumulators, their function principle, events happening during charge-discharge cycles of Ni-Cd cells and measuring method that will be used to verify of the iron influence. The practical part deals with the influence of iron on the development of oxygen during process of battery charging, on how iron affects the potential shift of oxygen gassing and how temperature affects this event.
|
|
|
Low ESR meter controlled by the microcontroller
Giemza, Michal ; Adámek, Martin (referee) ; Šteffan, Pavel (advisor)
This thesis describes the design and realization of the equivalent series resistance meter of capacitors. The first part discussed the theoretical issue of the equivalent series resistance of capacitor and chooses an appropriate measuring method. The second part describes the design of functional blocks of the meter and describes the realization of the final meter by the circuit and software page. The last section describes the measurement on real capacitors and its results.
|
|
|
Characterization of electrochemical properties of magnesium batteries in electrolyte modification
Honč, Jiří ; Doskočil, Leoš (referee) ; Wasserbauer, Jaromír (advisor)
This thesis deals with novel electrolytes for magnesium batteries. Prepared electrolytes were composed of affordable solvents and chemicals, which can be handled at normal laboratory conditions. Specifically, solutions of tetrahydrofurane and dimethylsulfoxide with magnesium chloride, aluminium chloride, nitrilotriacetic acid and disodium ethylenediaminetetraacetic acid, were prepared. To determine electrolyte ability of magnesium stripping and deposition, the cyclic voltammetry was used. The kinetics of electrochemical reactions in terms of polarization resistance was studied by electrochemical impedance spectroscopy. Based on scanning electron microscopy and EDS analysis, the effect of atmospheric oxygen and humidity on magnesium electrode corrosion during cycling was discussed.
|
|
|
New gel electrolytes
Sumka, Martin ; Jahn, Michal (referee) ; Sedlaříková, Marie (advisor)
This master´s thesis deals with the properties of gel polymer electrolytes, brief characteristics of other types of electrolytes and materials that are used for preparing polymer electrolytes. The thesis explains the use of the gel electrolytes in practice, the current conduction in the electrolytes and the properties of ionic liquids, and flame retardants. This thesis also focuses on methods of measurement of mechanical properties of gel polymer electrolytes. The practical part is focused on preparation of methacrylate gel electrolytes and their modifications with the use of flame retardant - triethyl phosphate (TEP) and ionic liquid - 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (Emim TFSI). In this part there are evaluations of their potential funcionality (potential window) and specific conductance conductivity using the method LSV (linear sweep voltammetry) and impedance spectroscopy. The practical part also includes a thermal analysis of selected samples by TGA, DTA and EGA methods.
|
|
|
Fuell cells
Sedláček, Tomáš ; Elcner, Jakub (referee) ; Hejčík, Jiří (advisor)
This bachelor thesis describes the distribution of fuel cells, principle of their operation and composition of the individual cell types. It states the advantages or disadvantages of the individual cell types and summarizes their basic parameters. This thesis also refers to the current state of development of fuel cells and convenient areas of their application.
|
|
|
Study of Electric and Dielectric Properties of Ionic Liquids
Altšmíd, Jakub ; Boušek, Jaroslav (referee) ; Mikula, Milan (referee) ; Nešpůrek, Stanislav (advisor)
Dizertační práce je zaměřena na studium elektrických a dielektrických vlastností iontových kapalin. Iontové kapaliny mohou nacházet uplatnění v široké škále aplikací, především pak v elektrotechnice. Teoretická část se věnuje popisu základních vlastností iontových kapalin a možností jejich uplatnění v kondenzátorech a elektrochemických senzorech plynů. Experimentální část se věnuje použitým metodám charakterizace vlastností iontových kapalin, jsou zde popsány teoretické poznatky o dielektrické spektroskopii včetně metod stanovení fyzikálních vlastností a vyhodnocení experimentálních dat. Experimentální část je rozdělena na dvě základní části. První se věnuje studiu iontových kapalin pro použití jako elektrolytu v kondenzátorech, druhá část se věnuje studiu vlastností připravených experimentálních senzorů na NO2, zejména vlivem vlastností iontových kapalin na sledované parametry senzoru.
|
guest ::
