|
|
Operational efficiency of boilers
Doležal, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is the operational efficiency of heat sources. The work had several goals. The first was to determine the efficiency of the wood boiler according to available calculation methods and to compare the methods among them. The second was to determine the difference in the performance of the flue gas analyzer and the real calculation. Further, to determine the efficiency of a boiler firing different wood species - spruce and hornbeam based on their properties and elemental composition. Experimental measurement of various operating states of effectiveness took place in an older two-generation family house, which was also the subject of the project part. Due to lack of project documentation, it was necessary to focus and plot the object. Afterwards, the building was thermally inspected and the design of the heating system and the reconstruction of the whole heating system was carried out. The project was developed in two variants for two different heat sources - a heat pump and a solid fuel boiler for heating and water preparation. The thesis deals with the technical report, the conceptual solution of the related professions, the evaluation of the heat source variants and the project documentation.
|
|
|
Two-Generation Detached House
Nogová, Tereza ; Gintar, Jan (referee) ; Králová, Zuzana (advisor)
This thesis describes the design of the two generation detached house in Stará Ves by Bílovec. The two generation house is divided into two flats, where flat for the oldest generation is solved only on the ground floor. Second flat for younger generation is designed as a two-storey. The two parts are covered with shed roofs, which are oriented opposite to each other.
|
|
|
Family house for two generations
Kuklová, Jana ; Novák, Michal (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor's thesis is the new construction of a detached two-generation family house in Horni Herspice, in the form of project documentation for construction. The object is designed as two separate units. One designed as barrier-free for the elderly, the other designed as a family house for a family of four. The building is designed as a masonry with reinforced concrete ceilings.The perimeter load-bearing masonry is made of 300 mm thick ceramic brick blocks and insulated with a 180 mm thick ETICS contact thermal insulation system. The internal load-bearing masonry is suitable from ceramic brick blocks 300 mm thick, the bathrooms are insulated from the room by an acoustic ceramic partition 200 mm thick. The internal non-load-bearing masonry is designed from 115 mm thick ceramic brick blocks. The staircase is designed as a reinforced concrete monolithic. The floors are designed as heavy, floating. The roof above the 1st floor is designed as a green flat roof, above the 2nd floor there is a single-skin flat roof. From the second floor there is access to the terrace. Hole fillings are designed as plastic. Behind the building is a spacious garden.
|
|
|
Generational detached house
Kühnová, Edita ; Papranec, Michal (referee) ; Petříček, Tomáš (advisor)
This bachelor´s thesis deals with the processing of project documentation in the documentation phase for construction of generational detached house. The thesis is not worked out in full extent, as prescribed in Decree No. 62/2013 Coll. Amending Decree No. 499/2006 Coll., On Construction Documentation. It includes only part A (Data Accompanying Report), B (Summary Technical Report), C (Situational Drawings), D.1.1 (Architectural and Building Solutions) and D.1.3. (Fire Safety Solutions) of Appendix 6 of this Decree. In addition, a thermal-technical assessment of the building was elaborated. The proposed two-storey house with small cellar is situated on flat land in the village of Lipová-lázně and it is divided into three parts, only with function of housing, but for different users (the young generation, the older generation and guests).
|
|
|
Multi-generational house
Staňo, Lukáš ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The subject of the bachelor thesis was the creation of project documentation for the implementation of construction for the construction of a new two-generation family house in Na Výsluní Street, in the town of Chlumec nad Cidlinou, cadastral area Chlumec nad Cidlinou [651800]. It is a proposed detached building, which is partially underground. The floor plan is rectangular. The building will have one underground floor and two above-ground floors. In the basement there is a technical background of the building, storage space and laundry. On the first floor there is the first of two residential units. On the second floor is the second residential unit with a terrace. The roof is flat.
|
|
|
Multi-generational house Polanka nad Odrou
Šichnárková, Adéla ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The task of this bachelor thesis is to design a new building of a multi-generation family house with a partial basement and to prepare project documentation for the construction phase. The building is situated on a flat plot of land in the city district of Ostrava, in Polanka nad Odrou. The proposal respects the surrounding buildings and all binding documents of the city, especially the Ostrava city plan. The building will be divided into two residential units. The first one will be only one-storey designed for two persons and the second one will be with basement, will have two floors and will be designed for 4 persons. The basement will be used especially for storage space. The family house is based partly on strip foundations and partly on a slab foundation. It is constructed of ceramic masonry units and covered with a single-skin flat roof. The ceiling structures will be made of monolithic reinforced concrete slab. The perimeter walls will be insulated with the ETICS contact insulation system using EPS facade polystyrene.
|
|
|
Two-generation family house with retail space
Výtisk, Lukáš ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
This bechelor thesis describes the design of the two generation detached house, which inclued 2 flats and and adjunction administrative part. Building has two floors and it´s partly with a cellar. The part of first floor is solved for older generation and second flat inclueding part of first and all second floor is designed for younger people. Structure is solved as T cross-section with two shed roofs and one flat roof.
|
|
|
Family house for two generations
Kuklová, Jana ; Novák, Michal (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor's thesis is the new construction of a detached two-generation family house in Horni Herspice, in the form of project documentation for construction. The object is designed as two separate units. One designed as barrier-free for the elderly, the other designed as a family house for a family of four. The building is designed as a masonry with reinforced concrete ceilings.The perimeter load-bearing masonry is made of 300 mm thick ceramic brick blocks and insulated with a 180 mm thick ETICS contact thermal insulation system. The internal load-bearing masonry is suitable from ceramic brick blocks 300 mm thick, the bathrooms are insulated from the room by an acoustic ceramic partition 200 mm thick. The internal non-load-bearing masonry is designed from 115 mm thick ceramic brick blocks. The staircase is designed as a reinforced concrete monolithic. The floors are designed as heavy, floating. The roof above the 1st floor is designed as a green flat roof, above the 2nd floor there is a single-skin flat roof. From the second floor there is access to the terrace. Hole fillings are designed as plastic. Behind the building is a spacious garden.
|
|
|
Two-generation family house
Honzl, Jakub ; Janda, Lukáš (referee) ; Sobotka, Jindřich (advisor)
The aim of the bachelor thesis is a project documentation for the construction of a two-generation house divided in two separate apartments. House has three aboveground floors and one underground floor. In the ground floor there is barrier-free apartment. Second apartment is in the second and third floor. In the second floor there is a bedroom with his own wardrobe room, bathroom, WC, and generous living room with a big window oriented to the garden. In the third floor there is a kid’s room and entrance on a terrace. Parking place is in the passage. Roofs are designated as impassable flat roof with a classic layer order with a final layer is from asphalt sheets. The building is built from Porotherm 44 laid on foam, the ceilings structure is from precast prestressed concrete panels SPIROLL, staircases are cast-in-place reinforced concrete. Foundation are from concrete strips footing. The facade of the building I partly overgrown by climbing plant Parthenocissus tricuspidata.
|
|
|
Operational efficiency of boilers
Doležal, Lukáš ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is the operational efficiency of heat sources. The work had several goals. The first was to determine the efficiency of the wood boiler according to available calculation methods and to compare the methods among them. The second was to determine the difference in the performance of the flue gas analyzer and the real calculation. Further, to determine the efficiency of a boiler firing different wood species - spruce and hornbeam based on their properties and elemental composition. Experimental measurement of various operating states of effectiveness took place in an older two-generation family house, which was also the subject of the project part. Due to lack of project documentation, it was necessary to focus and plot the object. Afterwards, the building was thermally inspected and the design of the heating system and the reconstruction of the whole heating system was carried out. The project was developed in two variants for two different heat sources - a heat pump and a solid fuel boiler for heating and water preparation. The thesis deals with the technical report, the conceptual solution of the related professions, the evaluation of the heat source variants and the project documentation.
|
guest ::
