|
|
Measurement of meteorological variables
Škorpík, Daniel ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
This bachelor thesis discusses about the basic meteorological variables, especially temperature and airflow. These magnitudes are measured using an anemometer which uses resistive sensors, namely, two thermistors of NTC type that described technology, operations, methods of scanning, sensor placement and implementation of such a device. After that was designed block diagram and circuit diagram. The meter is realized, than we describe the individual components and then is calibrated and tested. In conclusion, it is evaluated for use in medicine.
|
|
|
Design and properties of low-frequency amplifier with vacuum valves
Piroha, Ladislav ; Musil, Vladislav (referee) ; Šandera, Josef (advisor)
The purpose of the bachelor’s thesis is explanation of theory and construction of low frequency tube audio amplifier with UV meter. Main focus is on history and development of vacuum circuits from its early beginning, on electrical parameters and applied physical principles. Explanation of operating characteristics of amplifier classes and comparison of vacuum tube sound acoustic performance against transistor amplifier one. Finally, there is build description of single ended amplifier class A.
|
|
|
Led matrix 8x64
Marek, Michal ; Macháň, Ladislav (referee) ; Šteffan, Pavel (advisor)
The bachelor thesis describes what is a LED matrix and how to control them. The function of the control circuits for the LED matrixes, the function of the current controller and microcontroller programming method are delineates in the project. These include microcontroller programming via universal serial bus, changing source code parameters via local ethernet network with the ethernet connect module, using standard peripheral buses for serial transmissions and the ways of controlling LEDs using relevant libraries. Objective is to introduce a solution for LED controlling using the Windows software application and propose complex assembly includes all the necessary blocks, which provides simple operating for new users.
|
|
|
Market survey of high power semiconductor devices
Jankovský, Martin ; Rujbrová, Šárka (referee) ; Zmrzlá, Petra (advisor)
Hlavním tématem práce jsou moderní výkonové polovodičové součástky. Jsou diskutovány i rozvíjející se materiály s velkou šířkou zakázaného pasu a jejich elektrické vlastnosti. Práce je pak zaměřena na tyto moderní součástky, včetně jejich teorie, aplikace a dostupnosti na trhu. Dále práce předkládá tabulky jednotlivých zařízení, které jsou nabízeny evropskými předními výrobci polovodičů.
|
|
|
Reverse recovery in power integrated circuits
Šuľan, Dušan ; Žák, Jaromír (referee) ; Boušek, Jaroslav (advisor)
Předkládaná práce se zabývá parametrem “Reverse Recovery Time“ u polovodičových prvků a jeho vlivem na typické spínací obvody. V první části práce je objasněno co je “Reverse Recovery Time“ a jeho jednotlivé části. V další sekci je popsána jeho fyzikální podstata. Na konci teoretická části je rozebrán jeho efekt na spínací ztráty a doporučená metoda měření tohto parametru . Praktická část práce je zaměřena na simulace Dpdr45nres45 v prostředích Cadence a TCAD. Poslední část se zabývá návrhem obvodu na měření u reálných diod a samotným měřením diod a tranzistorů.
|
|
|
Nonlinearity in the course of acqusition date in optical coherence tomography
Kadla, Jan ; Kolář, Radim (referee) ; Kuna, Zdeněk (advisor)
This bachelor thesis builds on my semestral work, thus provides a description of the problem of optical coherence tomography imaging system in terms of a brief historical development, structural parts and modifications. Previous work is supplemented by a more detailed description of data acquisition and especially signal processing. I present examples of the clinical and research application of this technology, and try to objectively refer to its advantages and disadvantages. Chapter dedicated to the description of a practical measurement explains selected data collection procedure and clarifies their following processing. At the end of the work are summarized the results achieved, including the considerations of potential errors during the measurement.
|
|
|
Circuit Theory and Vizualizations
Molík, Petr ; Kaluža, Vlastimil (referee) ; Kunovský, Jiří (advisor)
This Bachelor thesis is concerned with modern method of interpretation and presentation of the Circuit theory. Clearly illustrates and with applied tests demonstrates theory, which is learned in Circuit theory subject, part of Bachelor's degree study program on Information technology on Brno University of Technology. Thesis consists of short introduction into method of visual education, main elaborated topics and description of prepared information system, which cover whole project. Thesis ends with system evaluation and usage of topics for students and references by students, they have already used described project.
|
|
|
Semiconductor diode modelling
Pacholík, Vladimír ; Wilfert, Otakar (referee) ; Pokorný, Michal (advisor)
This project is about phenomena, which proceed in semiconductor, eventually on semiconductor junction, including equations and relatives necessary for modeling simply semiconductor PN diode, Gunn diode and Schottky diode. Further including short way, how to use this equations and how simulate this diode in COMSOL Multiphysics and Tiber CAD software. Products of modeling are data in charts form. This charts giving basic idea about charge carriers, electrostatic potential and I-V characteristic.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
|
|
Thin device for the real temperature distribution measurement with the negastore matrix
Martinásek, Zdeněk ; Chmelař, Milan (referee) ; Rampl, Ivan (advisor)
The main task of the Master Thesis is to project a device to measure surface temperature distribution by matrix of diodes. The maeasuring device is designed for usage at places where other thermal map scanning measuring methods (e.g. thermocamera) can not be used. The key objective was to design an appropriate measuring method for selected type of sensor. This method should ensure the most effective detection of the changing value, translate received values to the digital form and send it to the computer. All circuits were powered over USB (Universal Serial Bus) together with the signalling. Calibration was needed due to different sensors technical parameters. The calibration was realized on the software level and displayed with the thermal map scanning on the computer. The final project has the form of the measuring installation with 256 sensors on 8x8 cm area.
|
guest ::
