|
|
Design of a heating system for an office building
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The aim of this bachelor thesis is to design a proposal of space heating and water heating system for an administrative building in Ostrava. The building has four above-ground floors and an underground floor. In the underground floor are located technical building background, stocks and a parking. In the above-ground floors are administrative offices. The heating is solved as a water heating, with a distribution of the heat into the space using panel radiators and convectors. Water heating is solved by an accumulation heater. As a heating energy source serves a cascade gas boilers. We can find in the whole building a forced ventilation. The theoretical part of this thesis deals with the BIM technology.
|
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
|
Design of a heating system for an office building
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The aim of this bachelor thesis is to design a proposal of space heating and water heating system for an administrative building in Ostrava. The building has four above-ground floors and an underground floor. In the underground floor are located technical building background, stocks and a parking. In the above-ground floors are administrative offices. The heating is solved as a water heating, with a distribution of the heat into the space using panel radiators and convectors. Water heating is solved by an accumulation heater. As a heating energy source serves a cascade gas boilers. We can find in the whole building a forced ventilation. The theoretical part of this thesis deals with the BIM technology.
|
|
|
The aesthetic experience of garden: In between of art and nature
Veselá, Marie ; Dadejík, Ondřej (advisor) ; Kubalík, Štěpán (referee)
The thesis is dealing with the phenomena of garden in context of enviromental aesthetic. Garden is an unique space balancing in between artificial and natural and it is a diverse space full of contrasts and questions that seek answers. The aim of the thesis is not only to clarify its mixed nature but also to localize the uniqueness of an aesthetic dimension within its appreciaton. First, the fields of aesthetics in art and in nature will be defined. Second, our attention will be focused on the position of garden in between of these two fields. Special attention will be paid to the aspect of the borders, respectively ramework, whether physical or interpretative. The thesis will follow the border as a distinctive factor as well as the common element linking the garden with art and nature.
|
|
| |
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
| |
guest ::
