|
|
Design of beer tap
Vaňková, Klára ; Sládek, Josef (referee) ; Ondra, Martin (advisor)
The subject of my bachelor thesis is the design of a beer tap, in particular portable beer cooler and dispenser with a built in air compressor which has to comply with demanding constructional, ergonomic and aesthetic requirements. The ultimate goal of the designing process is to facilitate the portability of the dispenser and enhance its looks by creating a new visual style relating to the Czech tradition.
|
|
|
Absorption heat pumps for small applications
Pejcl, Jiří ; Novotný, Jan (referee) ; Mastný, Petr (advisor)
This bachelor work is focused on absorption heat pumps for small applications. The aim of this work is to compile the basic differences between compression heat pumps and absorption heat pums. And also to propose the system with absorption heat pump, which is energeticly classified in the end of the work. In the opening part there is the constructional description of these heat pumps, there are explained basic principles of these mechanisms. Then you will find the comparison of absorption heat pumps and compression heat pumps. Next fraction is concerned with design of the system with absorption heat pump. There is the system with absorption unit designed - this unit enables to heat and to cool. And also with solar system, which will support the heating process of supply water. Final part is applied to energetic evaluation of designed system, for purpose of this evaluation are made basic counts of required energy.
|
|
|
Design of testing rig for static and cyclic stress by pressure
Gerák, Jakub ; Polášek, Přemysl (referee) ; Škopán, Miroslav (advisor)
This diploma thesis describes the design of equipment for static and cyclic loading of coolers by pressure. The aim is to first identify the necessary parameters from the tested coolers. Then, based on the obtained data, design the hydraulic circuit, including the parameters of individual components and motors, followed by the design the control logic, which is required for designing the control system.
|
|
|
Optimization of air conditioning of the wellness sports center
Prchalová, Nikol ; Rubina, Aleš (referee) ; Blasinski, Petr (advisor)
The diploma thesis deals with microclimate of a pool hall. This is divided into three parts. The first part describes the theoretical aspects of the environment in swimming pools in general. The second part of the diploma thesis deals with the calculation of the course of specific moisture concentration during the day in the pool hall. Different humidity concentration curves are assessed based on different electable input parameters. Subsequently, suitable setting options are evaluated in order to achieve acceptable environment in the hall in terms of humidity and optimal operating costs. The last part relates to the experimental part. This examines the measurement of evaporation under different boundary conditions and the subsequent comparison with some calculation methods for the calculation of evaporation.
|
|
| |
|
|
Hydrostatic drive of multi-purpose loader DAPPER
Vydra, Tomáš ; Merenda, Lukáš (referee) ; Škopán, Miroslav (advisor)
This thesis deals with design of hydrostatic drive for multipurpose loader and tool carrier DAPPER. At the beginning is research of different basic concepts and modern solutions to the problem, aided by a detailed description of competitive machine in the same performance category. Extensive comparison with other producers is included in the annexes to this thesis. Furthermore, a theoretical driving characteristic and its appropriateness is examined further on the basis of two model situations. The calculations of the individual components of the hydraulic circuit precedes drive kinematics analysis of articulated machine frame, on it final conception of hydrostatic drive is chosen. Firstly hydromotors and hydogenerator are chosen on the grounds of calculations then hydraulic hoses, filters and flow divider. Next chapters are aimed to calculations of hydraulic losses and thermal calculation of hydraulic circuit. Final part deals with introduction the final characteristics of drive. The practical parts of the work are assembly drawings with main power components and hydraulic schematic of drive.
|
|
| |
|
|
Simulation of heat dissipation for power component
Sedlář, Tomáš ; Macháň, Ladislav (referee) ; Čožík, Ondřej (advisor)
The diploma thesis deals with the simulation of heat dissipation for LED Seoul SZ5-P. The heat transfer is discussed first. Further, the issue of thermal management and its design is analyzed. The dependence of LED junction temperature on area of single and double layer printed circuit board is simulated with Ansys Icepak. Additionally, influences of the number and placement of vias on the printed circuit board and aluminum substrate printed circuit board are simulated. Last but not least, the equations describing the dependence of printed circuit board area on desired LED junction temperature are derived. Finally, the values of heat transfer coefficient including convection and radiation are determined for various heat losses and junction temperatures.
|
|
|
Conceptual design of a heat switch installation into a structure of satellite
Vrba, Martin ; Horák, Marek (referee) ; Mašek, Jakub (advisor)
Tato diplomová práce je zaměřena na sestavení přehledu konstrukcí a teplených cest kosmických lodí a kosmických vozidel, které se v současné době používají. Na základě specifických požadavků a standardů jsou vypracovány koncepční návrhy zástavby tepelného spínače do konstrukce družice. V jednotlivých kapitolách jsou popsány určité členy, které se na vedení tepla podílí a jsou důležité pro navrhované koncepty z pohledu konstrukce. Diplomová práce popisuje postupy výpočtu tepelných vodivostí a rozložení působící tíhové síly do míst uchycení pro jednotlivé koncepty. Na závěr provádí hodnocení a výběr potenciálně nejvhodnějšího návrhu.
|
|
|
Active cooling of the car headlight
Žlebek, Jan ; Mauder, Tomáš (referee) ; Štětina, Josef (advisor)
The main goal of this bachelor thesis is to design the cooling of the headlamp by using a Peltier module. The first chapter is to acquaint the reader with the possibility of heat transfer. Further work is focused on various types of heatsinks and printed circuit board. The third part describes the principle of functions of Peltier's module. The last part of the work contains the design of the heatsink assembly and the design solution of fixing the cooling assembly in the housing.
|
guest ::
