|
|
Constructive - Technological Project of Medical Center in Vizovice
Špalková, Martina ; Lukášková, Jana (referee) ; Mohapl, Martin (advisor)
The diploma thesis is based on a project of medical centre in Vizovice. The medical centre is designed as a three-floor building with a receding top floor. Building foundations are designed from foundation pads and strips from reinforced concrete, the load-bearing masonry is designed from hollow clay blocks ZELUS, a reinforced concrete ceiling is designed as a bracing element. The medical centre is roofed by a flat roof with a PVC covering. This thesis deals with the budget and time plan of the whole construction, transport accessibility of the building, building maintenance instructions and maintenance costs for 25 years, daylighting of room number 1.32, an engineering report of construction site equipment and its drawing, a design of lifting mechanism of the site equipment, a plan for transport of concrete and concreting the floor slabs. The thesis is mainly focused on roofing of the medical centre, technological regulation for the roofing and reinforced concrete floor slabs is elaborated, as well as a control and test plan for the floor slabs from the reinforced concrete and for the roof PVC foil.
|
|
|
Technological stage coarse substructure "Vinařství"
Staněk, Martin ; Štěrba, Martin (referee) ; Henková, Svatava (advisor)
The subject of this bachelor thesis is technological stage of gross substructure of winery. Part of this work is a technical report of building equipment, technological instruction for selected works, the draft of the mechanical assembly, inspection and test plans, schedule of health and safety, bill of quantities, itemized budget, the situation of the building site and the schedule.
|
|
|
Architectural and technological project of reconstruction surgeries KPRCH University Hospital Brno
Hačka, Martin ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The aim of this work is to prepare the implementation of the reconstruction and extension of the Teaching hospital Brno Bohunice. Implementation of major technological stages is addressed in building technological study. Work includes selected legal procedures before the start of construction work, such as opening the envelopes and investor-supplier contract for the work. Further work solution contains selected technological processes of each sub-job phases, complemented by technological regulations, proposals for major construction machinery, selected inspection and test plans. As part of my work I will work with subcontractors to perform CFA piles, so I deal with on demand system for subcontractors, notice of award, issuing orders and delivery site for subcontractors. I believe that the subject of occupational health and safety on the jobsite is an important chapter construction and will therefore address the safety and health of people at work drawing up a plan OHS and OHS coordination meetings. Work will also be supplemented by information site equipment, time and financial plans and drawings of all the individual components specified in the Annexes. The content of my work is also a doctoral student competition entitled "Modern technologies and materials", where thoughts about the implementation superaseptických surgeries new technologies. This work will be the content of the text section of the attachments, always mentioned with the name of specialization.
|
|
|
Production hall MONTGAS - realization of the gross substructure
Kurka, Jan ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
The bachelor thesis deals with the realization of the gross substructure of the new production hall of the company MONTGAS a.s. in Hodonín on the street U Kyjovky. Part of this technological phase is the realization of earthworks, driven gravel FRANKI piles, driven reinforced concrete FRANKI piles, cast-in-place reinforced concrete foundation pads, sills and strip foundations, soil slab, base layers and reinforced concrete floors of the building including steel fibre reinforced concrete slab and cast-in-place reinforced concrete structure of the paint shop inside the production hall. It also includes damp proof layer and insulation of foundation structures. The content of this work is the technology of earthworks and all piles in the form of technological regulation. Construction costs are calculated in an itemized budget from student version of the BUILDpowerS software with a bill of quantities. The schedule is drawn up in the form of a schedule from student version of the CONTEC software. Plans are in place to ensure both quality and safety during construction.
|
|
| |
|
| |
|
|
FAMILY HOUSE WITH THE SURGERY GENERAL PRACTITIONER
Volf, Josef ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The theme of bachelor´s thesis is new-building family house with the surgery general practitioner. The residential area is divided for the two separate housing units. One of the apartments is duplex. The Surgery is wheelchair accessible. It has a separate entrance form the north side. The building is set in sloping terrain. It has three floors, it is partly basement and 3NP is solved in the attic. It is a brick building, which is the system POROTHERM with a combination of BTB fittings in the basement. Roofing is solved by a combination gabled and rack roof with a pitch 35° and 15°.
|
|
|
Constructive-technological project of building polyfunktion house locality Nova Nitra
Malý, Filip ; Ing.Lumír Kliš (referee) ; Diaz, Yvetta (advisor)
The content of this thesis is the construction project of technological multifunctional building new locality Nitra the Slovak Republic. Individual points outline the project, which are dealt with in this thesis can be divided into subcategories, depending on the type of information provided. The first category can include items such as a technical report to the STP, which describes the basic information about the objects constructed building including the construction situation, location of the site including links to transport and technical infrastructure and rough timetable for the construction of all buildings. The second category can include no specific calculation and optimization outputs such as itemized budget polyfunctional house SO-07.03, drawing of the site including all buildings proposed site and their economic evaluation, sizing of utilities for supplying water and electricity construction site, design of building machines and mechanisms including determining the time of deployment, technological regulation for the implementation of monolithic roof structure, including financial balance sheets prepared by the deployment of slab formwork. The last category included in the thesis are legislative requirements that must be observed and kept in the course of the construction plan is constructed as a safety and health at work, including security risks drawn up, inspection and testing schedule for monolithic construction and a list of environmental risks that may arise during implementation.
|
|
|
Family house in Myjava
Mizerák, Maroš ; Kalužová, Alena (referee) ; Pěnčík, Jan (advisor)
The theme of bachelor´s thesis is new-building family house in Myjava. In the house is one living room on the first floor and four are in the second floor. The building is set in sloping terrain. It has two floors and one underground floor. Second floor is solved in the attic. It is a brick building, which is the system POROTHERM with a combination of BTB fittings in the basement. Roofing is solved by gabled roof with a pitch 32° and 37°.
|
|
|
Construction technology project of construction boarding house for seniors
Karafiátová, Hana ; Kopecký, Lukáš (referee) ; Diaz, Yvetta (advisor)
The purpose of the final thesis is to elaborate selected parts of a technology building project of the Pension for the elderly. The complex includes eleven building objects and the main one is developed in detail. The final thesis includes a technical report about the technology building project, a building schedule, suggestion for realization of the main stages of its construction, a design of mechanical assembly. The final thesis also includes the project of site equipment, technological regulations , an inspection and test plan, an occupational safety and health plan.
|
guest ::
