|
|
Multimedia support of the course BSIS
Pasečný, Jan ; Šebesta, Vladimír (referee) ; Sigmund, Milan (advisor)
This paper takes aim at creating a consistent form of study materials, supplemented with illustrative examples, for Signals and systems subject. The thesis starts with basic characteristics of acoustic, image, biological and communication signals. Characteristics of linear signals and AD&DA conversion has been added to the next part and to complete the submission, discrete signals follow. Diploma thesis as a whole contains basic theoretical description of problematics, which it tries to supplement with interesting examples, connections, graphs and matlab scripts for illustrative presentation of mentioned problematics.
|
|
|
Wireless communication link analyzer
Dostálek, Jakub ; Burian, František (referee) ; Jílek, Tomáš (advisor)
The aim of this bachelor thesis is to design and implement a wireless communication analyzer in mobile robotics, using IPv4 protocol and Ethernet interface and to create correctly selected and expressed characteristics from the measured data, according to which the wireless communication channel can be further optimized for the best data transmission. To meet these requirements, a brief search of existing solutions was performed, their applicability was discussed and important parameters of the wireless transmission channel were defined, which will form the given characteristics. Furthermore, the actual design and implementation of a wireless communication link analyzer for previously specified required parameters, verification of its functionality on the transmission link with known parameters and automation of measurement and data evaluation was performed.
|
|
|
Data transmission in mobile networks
Bílek, Petr ; Molnár, Karol (referee) ; Havelka, Dušan (advisor)
The Bachelor’s thesis deals with mapping and usage of mobile networks of data transfers. It describes every particular generation of networks and technologies that they can use. This thesis is divided into two main parts, theological and practical. In the first part, the technologies of the second and third generation currently used for data transfer in mobile networks are described there. This concerns especially GPRS, EDGE and UMTS services. The thesis focuses on modulations used for these technologies, together with the coding and bit rates possible. It compares their advantages and disadvantages and presents their utilization among national operators. It also tries to sketch out the way the data services of mobile networks will proceed. The second part of the thesis is also divided into two parts. The first one is the simulation of the UMTS network with the assistance of the OPNET Modeller 14.5 environment. In this case, the thesis aims at two important characteristics - such as the dependence on the bit rate and distance of the primary station, and dependence on the bit rate and total load of the whole network. Both characteristics are observed mainly because of the bit rate and power characteristics. It describes objects and funcions of the OPNET environment. The next part in the practical section is the factual measurement of the Internet 4G service, provided by T-Mobile operator. The thesis focuses here on the presentation of the outcomes which were accomplished by the practical measurement of that service. The end of this thesis is dedicated to the comparasion of simulated outcomes with the outcomes practically measured, and to the conclusion of the results emerged from them.
|
|
|
Measurement of qualitative parameters in the access network
Kejík, Tomáš ; Slavíček, Karel (referee) ; Grenar, David (advisor)
The theme of this bachelor’s thesis is „Measuring of qualitative parameters in an access network.“ The aim of this paper is a characterization of multimedia broadcasts in access networks and the creation of a functional network generator. The theoretical part of the paper is dedicated to analyzing key broadcasting parameters, which affect the resulting quality of network broadcast. Furthermore, used network protocols that are given for network and multimedia broadcast are analyzed. Simulation is done by using of GNS3 software. After that, transferred data were measured. Side effects affecting the functionality of the resulting transmission were subsequently analyzed. Another part of the paper is the practical part, which is focused on creation of a network generator by using the Bash language and making a script to facilitate turning on the generator for different counts of clients. At the end of the paper, the broadcast parameters were evaluated.
|
|
|
Data logger for serial communication lines
Jankech, Tomáš ; Šebesta, Jiří (referee) ; Dušek, Martin (advisor)
The aim of bachelor’s thesis is the realization of data logger for serial communication lines. This paper describes basic concepts of serial communication and looks more deeply into RS232 and RS485 serial communications standards. It describes usual methods of data recording and their application in practice. Data logger’s block diagram is described in detail for each of its parts. Their descriptions contain an overview of circuits, which allows realization of individual blocks and circuit diagram of selected circuit. Following chapters describes design of printed circuit board, control application for PC and firmware for the microcontroller.
|
|
|
Modulations in PLC systems
Procházka, Vít ; Kouřil, Jiří (referee) ; Krajsa, Ondřej (advisor)
The bachelor thesis describes principles and methods of Powerline Communications, practical usage possibilities both in industrial applications but mainly in broadband systems that may represent promising competition to conventional broadband access, e. g. xDSL connections without the need of new wiring, WIFI etc. The thesis also focuses on problems that can occur in the communication channel from the view of electromagnetic compatibility and assorted interferences. The 50 Hz frequency electric network (60 Hz in the USA) was not designed for data signal transmission, problems may arise mainly at higher frequencies and broadband communication. It is necessary to implement methods which enable transfer of information signal through a communication channel with minimalization of problems such as interference, cable attenuation, electromagnetic compatibility, bit error rate (BER), etc. Furthermore, currently used modulation principles and their characteristics are described, such as spread spectrum modulation DSSS, FHSS, traditional OFDM, alternative modulations FMT and DWMT with filter banks. The last chapter of the bachelor thesis features models of particular modulations created in the Matlab-Simulink program and the conclusion presents advantages and disadvantages of their implementation in PLC systems.
|
|
|
Extension of optical fiber transmission system
Horský, Tomáš ; Tomašov, Adrián (referee) ; Dejdar, Petr (advisor)
The diploma thesis describes the elaboration of a program for the simulation of an optical transmission path. The work introduces the basic parameters of optical transmission, such as attenuation, dispersion and bandwidth. Furthermore, the techniques of line code and error detection are described in the work, especially a cyclic redundancy sum. The key parameter of this thesis is dispersion of the optical signal. The work includes the characteristics of the eye diagram and its analysis. The resulting program can also be used to measure the real transmission route and its parameters.
|
|
|
Wireless communication link analyzer
Dostálek, Jakub ; Burian, František (referee) ; Jílek, Tomáš (advisor)
The aim of this bachelor thesis is to design and implement a wireless communication analyzer in mobile robotics, using IPv4 protocol and Ethernet interface and to create correctly selected and expressed characteristics from the measured data, according to which the wireless communication channel can be further optimized for the best data transmission. To meet these requirements, a brief search of existing solutions was performed, their applicability was discussed and important parameters of the wireless transmission channel were defined, which will form the given characteristics. Furthermore, the actual design and implementation of a wireless communication link analyzer for previously specified required parameters, verification of its functionality on the transmission link with known parameters and automation of measurement and data evaluation was performed.
|
|
|
Measurement of qualitative parameters in the access network
Kejík, Tomáš ; Slavíček, Karel (referee) ; Grenar, David (advisor)
The theme of this bachelor’s thesis is „Measuring of qualitative parameters in an access network.“ The aim of this paper is a characterization of multimedia broadcasts in access networks and the creation of a functional network generator. The theoretical part of the paper is dedicated to analyzing key broadcasting parameters, which affect the resulting quality of network broadcast. Furthermore, used network protocols that are given for network and multimedia broadcast are analyzed. Simulation is done by using of GNS3 software. After that, transferred data were measured. Side effects affecting the functionality of the resulting transmission were subsequently analyzed. Another part of the paper is the practical part, which is focused on creation of a network generator by using the Bash language and making a script to facilitate turning on the generator for different counts of clients. At the end of the paper, the broadcast parameters were evaluated.
|
|
|
Extension of optical fiber transmission system
Horský, Tomáš ; Tomašov, Adrián (referee) ; Dejdar, Petr (advisor)
The diploma thesis describes the elaboration of a program for the simulation of an optical transmission path. The work introduces the basic parameters of optical transmission, such as attenuation, dispersion and bandwidth. Furthermore, the techniques of line code and error detection are described in the work, especially a cyclic redundancy sum. The key parameter of this thesis is dispersion of the optical signal. The work includes the characteristics of the eye diagram and its analysis. The resulting program can also be used to measure the real transmission route and its parameters.
|
guest ::
