|
| |
|
|
Preparation of hystorical geopolymers
Šrámková, Eva ; Šoukal, František (referee) ; Havlica, Jaromír (advisor)
Diploma thesis studies historical bonding agents on the base of geopolymers. The aim of the thesis is to find a proper material composition, especially made of natural clay materials (kaolinite, bentinite) and their modifications (metakaoline). These bonding agents have to have a suitable type of an activator that guarantees good bonding properties. Therefore testing of various kinds of alkaline activating ingredients on the same mineral composition was done. Except of usual hydroxides and a water glass, ancient natrons (mixtures of alkaline carbonate with addition of appropriate chlorides) and a lime mash were used as the activators. From the above mentioned mixtures, series of samples (columns 20 x 20 x 100 mm) stored at the laboratory temperature were prepared. In the prepared mashes, their workableness and moulding were investigated. In the developed samples, their surface appearance was observed together with a number of efflorescence and its types. An indivisible part of the research was formed by determination of mechanical properties of the experimental columns such as a compressive strength and a tensile strength in bending. Furthermore, phase composition of the samples and its changes with a temperature increase were investigated. For these tests, XRD and TG – DTA methods were used. A multi-seat isoperbolic calorimeter was used to study hydratation that was also the important part of the general evaluation of designed mixtures.
|
|
|
Recyclation of dust from production of dry mortar blends
Ondrůšková, Nela ; Novotný, Radoslav (referee) ; Šoukal, František (advisor)
The work deals with the problem of disposal of ever-increasing waste (dust) from the production of building materials and examines the possibility of recycling dust dust into cement repair mortar. The aim of this work was to determine the composition of individual dust particles from the production of cement mixtures and to determine their mechanical properties, as well as to determine the ideal ratio of dust particles to each other when mixing the dust mixture and its mechanical properties. This mixture consisted mainly of dust from products based on Portland cement, aluminous cement, gypsum and lime hydrate. The mixture further replaced part of the cementitious mortar and the impact of the additive on the mechanical properties of the cementitious mortar was determined. X-ray fluorescence spectrometry was used to determine the elemental composition, and X-ray diffraction analysis was used to determine the mineralogical composition. Test specimens were prepared according to the ČSN EN 12390 standard. Mechanical strength tests were performed on the test specimens. A large part of the test specimens could not be subjected to mechanical tests because the test specimen did not solidify even after a long time. The individual measurements that could be made show that the mechanical properties of the dust samples show values which have shown that the dust cannot be recycled into the product due to its instability. Dust particles have too diverse composition and in combination with cementitious repair mortar do not have the required properties. The problem is especially the sampling from the data, which did not solidify at all and thus excluded the remaining samples with already good properties of the same sample. When designing the method of recycling, it was necessary to take into account which product of the company is most in demand, where recycling would also make economic sense, which is also an important indicator for the operation of the company today. Dust particles could prove successful in another product, but it would not be advantageous for the company now, so now the recycling of dust particles will not start and they will be further disposed of in the same way.
|
|
| |
|
|
Study of electrode materials for post-lithium ion systems
Kekelák, Miroslav ; Jaššo, Kamil (referee) ; Kazda, Tomáš (advisor)
This bachelor thesis deals with studying electrode materials for post-lithium ion systems. The theoretical part describes the principle, history and construction of lithium-ion battery cells. A separate chapter is dedicated to the materials of positive and negative electrodes for lithium-ion batteries. The third chapter is dedicated to the principles of new generation lithium-air and sodium-ion batteries. The last chapter of theoretical part is dedicated to lithium-sulfur batteries, which describes their principle, history, used electrode materials and the influence of binders. The experimental part is dedicated to the preparation of the electrode material of lithium-sulfur accumulator in combination with water-soluble binders and their measurement using electrochemical methods.
|
|
|
Rheological properties of building binders in their fresh state
Hegrová, Michaela ; Rovnaník, Pavel (referee) ; Vyšvařil, Martin (advisor)
This thesis is devoted to the rheological properties of building binders. The theoretical part focuses on individual types of building binders, their rheological properties and basic parameters determinated during the rheological characterization of building binders. The practical part deals with the resultes obtained from the meansurements on a rotational rheometr using the geometry type of plate to plate. These results are subsequently evaluated.
|
|
|
Use of special binders for recycling of asphalt mixtures at mixing plants
Pěch, Pavel ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in the final section of the thesis.
|
|
| |
|
| |
|
| |
guest ::
