|
|
Dining Outdoors
Trčková, Jitka ; Buganská, Tamara (referee) ; Zdařil, Zdeněk (advisor)
Feasting which contains plates, cups, cutlery, quilt and canvas bags as a cover. Bags are made for cyclists, pedestrians and easily used for more demanding users with car. Set is designed for 4 people. QUILT, shape is proceed from square, place for feasting is moved from center of quilt to the longest side on edge. Users are closer together and still can see each other in conversation. Place for feasting is highlighted with colored rubber segments which also help balance surface. PLATES are made from two parts - dinner plate and soup plate. Inside the soup plate is space for cutlery storage. CUTLERY is consisted of desert spoon, fokr and knife. All these three parts have a groove which is enabling fix cutlery together. CUPS, shape is proceed from accidence of hole project. There is a small point on the outside which helps to use the cup out of the quilt without capsizing of drink. This point is designed for sticking in the ground. BAGS have classic oblong cut, they are designed for easy use for cyclists (2 pieces). It is consisted also strap for pedestrian. There are two smaller pockets for set of plates and set of cups inside one of the bag.
|
|
|
Design of bike helmet
Sojka, Vojtěch ; Sládek, Josef (referee) ; Křenek, Ladislav (advisor)
This bachelor´s thesis deals with design of bike helmet. Using of this helmet is aimed especially for race, but also for hobby riding. In the final design is created a helmet, which shape ties together with actual models, where the main emphasis is put on the innovative solution of shoring. The whole helmet with the binding mechanism is created as a model in a scale factor 1:1.
|
|
|
Bicycle path between Kunovice and Uherske Hradiste
Veselý, Libor ; Patočka, Miroslav (referee) ; Smělý, Martin (advisor)
The aim of this bachelor thesis is to design a bike path between Kunovice and Uherské Hradiště. Bicycle path will serve to cyclists and pedestrians. The design is based on the results of a traffic survey and takes into account the placement of bike paths already present in the area and the local conditions. This project is not concerned solely with the route itself, but also addresses other issues, such as ecology (minimalising the impact on landscape, water infiltration), cost-effectiveness or comfort and safety (illumination of the path, traffic sign placement).
|
|
|
Kinesiology analysis of the horizontal jump in bike trial
Eibl, Tomáš ; Bunc, Václav (advisor) ; Kračmar, Bronislav (referee)
Title: Kinesiology analysis of the horizontal jump in bike trial Cíle práce: The aim of this thesis is to verify the use of non-specific strength-training funds for the development of horizontal jump in bike trial. Methods: Content analysis of documents Method interview with assistant work Mgr. Marek Jelinek Ph.D. Method interview with the technician when recording data Case Study riders The method of data collection using surface electromyography Data Analysis Data processing software MS Excel - evaluation of differences of values sized muscle action potential in the different types of exercise Synthesis - making inferences and discussions Results: The list of exercises for developing strength abilities of the lower limbs, which are part of non-specific resources and influence the development of the horizontal jump in cyklotrial. Ranking exercises, which are in accordance with the measured values for effective development of horizontal jump in bike trial. The exercises are sorted from highest values aktivity of all muscles: 1st Squat with free weights 2nd Jump from second place 3rd Deadlift 4th Plyometrie 5th High Jump 6th Legpress Key words: Cycling trails, biking, surface electromyography.
|
|
|
Turistika and educational trails in the Jizerské hory
Hádková, Kristýna ; Brtník, Tomáš (advisor) ; Fořterová, Petra (referee)
Title: Turistika and Educational Trails in the Jizerské hory Objectives: The main targets of the theses are to introduce hiking, biking and cross-country skiing as the most used types of turistika kinds in the Jizerské hory Mountains PLA, to get acquainted with the Jizerské hory and educational trails located there and to explain the potential for their development in the future. Methods: To introduce hiking, biking and cross-country skiing, the following sources have been used: outdoor activities, the Jizerské hory Mountains PLA and educational trails professional literature; websites of main institutions, i. e. Czech Tourist Club, Nature and Landscape Protection Agency of the Czech Republic and further available. To create an overview of the current state of educational trails in the Jizerské hory Mountains PLA and possible alternatives for their expansion, the internet research has been carried out and the obtained information have been related to the Jizerské hory. Results: All educational trails in the Jizerské hory Mountains PLA are focused on hiking. They are realized in the form of information boards. Modern technologies using smartphones, which could eliminate the use of boards, have already been used on educational trails in other areas. They are advantageous in many points of view....
|
|
|
Energy expenditure of different size of mountain bike rims
Chotěbor, Tomáš ; Brtník, Tomáš (advisor) ; Baláš, Jiří (referee)
Title: Energy expenditure of different size of mountain bike rims Objectives: The goal of this bachelor thesis is to gather and provide information on different energy expenditure (EE) of the organism when riding mountain bikes with different size of rims, while also considering different terrain. Methods: This thesis contains an experiment based on intra-individual measurements, which involved three participants of a similar age, weight, height and physical fitness. EE rate was determined based on the volume of oxygen consumption (VO2) and the amount of exhaled carbon dioxide (VCO2), i.e. by indirect calorimetry. For the measurement of respiratory gases device, we used Metamax 3B. The testing was performed with two wheel sizes, with diameters of 26 "and 29". The runs were carried out on natural circuit with different types of surface. Research participants completed two laps on both types of wheels. One ride lasted an average of 7:04 minutes. Results: We did not find a significant difference in energy expenditure (EE) when riding a mountain bike with the rims with a diameter of 26" and while riding on rims with a diameter of 29". The results of the experiment showed a slight difference in favour of the wheel diameter 29" however, regarding the standard error of measurement, this difference seems negligible...
|
|
|
Kinesiology analysis of the horizontal jump in bike trial
Eibl, Tomáš ; Bunc, Václav (advisor) ; Kračmar, Bronislav (referee)
Title: Kinesiology analysis of the horizontal jump in bike trial Cíle práce: The aim of this thesis is to verify the use of non-specific strength-training funds for the development of horizontal jump in bike trial. Methods: Content analysis of documents Method interview with assistant work Mgr. Marek Jelinek Ph.D. Method interview with the technician when recording data Case Study riders The method of data collection using surface electromyography Data Analysis Data processing software MS Excel - evaluation of differences of values sized muscle action potential in the different types of exercise Synthesis - making inferences and discussions Results: The list of exercises for developing strength abilities of the lower limbs, which are part of non-specific resources and influence the development of the horizontal jump in cyklotrial. Ranking exercises, which are in accordance with the measured values for effective development of horizontal jump in bike trial. The exercises are sorted from highest values aktivity of all muscles: 1st Squat with free weights 2nd Jump from second place 3rd Deadlift 4th Plyometrie 5th High Jump 6th Legpress Key words: Cycling trails, biking, surface electromyography.
|
|
|
Bicycle path between Kunovice and Uherske Hradiste
Veselý, Libor ; Patočka, Miroslav (referee) ; Smělý, Martin (advisor)
The aim of this bachelor thesis is to design a bike path between Kunovice and Uherské Hradiště. Bicycle path will serve to cyclists and pedestrians. The design is based on the results of a traffic survey and takes into account the placement of bike paths already present in the area and the local conditions. This project is not concerned solely with the route itself, but also addresses other issues, such as ecology (minimalising the impact on landscape, water infiltration), cost-effectiveness or comfort and safety (illumination of the path, traffic sign placement).
|
|
|
Product development opportunities for hiking and biking in the Microregion of Šumava - West
KŮS, Daniel
The focus of the thesis is to assess the present disposition of hiking and biking paths, including the research of services supply for tourists in the explored area. Furthermore there is recommended the development opportunities of the product. The following methods are applied in the research: scientific literature research, field survey, specification of object and subject, proposals and measures and design of a new product. For obtaining these aspects is used quantitative research- questionnaire survey.
|
|
|
Dining Outdoors
Trčková, Jitka ; Buganská, Tamara (referee) ; Zdařil, Zdeněk (advisor)
Feasting which contains plates, cups, cutlery, quilt and canvas bags as a cover. Bags are made for cyclists, pedestrians and easily used for more demanding users with car. Set is designed for 4 people. QUILT, shape is proceed from square, place for feasting is moved from center of quilt to the longest side on edge. Users are closer together and still can see each other in conversation. Place for feasting is highlighted with colored rubber segments which also help balance surface. PLATES are made from two parts - dinner plate and soup plate. Inside the soup plate is space for cutlery storage. CUTLERY is consisted of desert spoon, fokr and knife. All these three parts have a groove which is enabling fix cutlery together. CUPS, shape is proceed from accidence of hole project. There is a small point on the outside which helps to use the cup out of the quilt without capsizing of drink. This point is designed for sticking in the ground. BAGS have classic oblong cut, they are designed for easy use for cyclists (2 pieces). It is consisted also strap for pedestrian. There are two smaller pockets for set of plates and set of cups inside one of the bag.
|
guest ::
