|
|
Motorway Viaduct
Polách, Marek ; Šopík,, Leonard (referee) ; Stráský, Jiří (advisor)
The thesis is a design of a bridge crossing the valley of the Hrabyňka creek as a part of road I/II. Firstly, three possible structures are designed and according to their advantages and disadvantages, the best of them is selected. In this case a cable stay bridge was selected. Following is a design of span lenghths, collumn heights and the cross-section. Then the loads are detremined and applied on a numeric model cretaed in software working on the basis of FEM. In continuation internal forces are calculated and their propriate combinations for service limit stay and ultimate limit state with time dependent analysis taken into account. In the end the reinforcement steel is designed for one part of the structure. Detailed drawings are also part of the thesis.
|
|
|
Survey and Diagnostics of Building Construction
Řezáč, David ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The diploma thesis deals with the construction and technical survey of a reinforced concrete structure. The theoretical part describes the tested properties of concrete and the methodology of their tests used in the practical part. The practical part is devoted to the diagnosis of the existing structure, which was determined the strength of concrete using core holes, concrete adhesion by tear tests, and reinforcement of reinforced concrete elements of the structure determined by ground-penetrating radar, electromagnetic indicators and additional chopped probes.
|
|
| |
|
|
Preparation of the implementation of Kelčský Javorník Lookout Tower, Rajnochovice
Vokurek, Kamil ; Rotrekl, Ivo (referee) ; Kantová, Radka (advisor)
This diploma thesis is based on preparation of the implementation of Kelčský Javorník Lookout Tower in Rajnochovice. The main idea of the lookout tower constructing is to increase the local tourism. Diploma thesis assesses the whole project and it is focused on the foundation of the rough lower construction and also on assembly of the higher construction. Planning was assessed in terms of time, finance and in terms of the use of material resources. The quality of construction will be ensured by created inspection and test plans. To increase the overall service life of the structures, a scheduled maintenance schedule was designed. A variant solution of electricity supply was proposed, which will shorten the construction time, reduce the total construction costs and the overall maintenance of the building during its lifetime.
|
|
|
Extension of School
Jirčík, Jakub ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The content of the thesis is a static design of the supporting parts of the extension of the textbook pavilion of the elementary school in Mirošov. The proposed building is a four-storey reinforced concrete monolithic column construction. The ceilings above the first three floors are designed as cross-reinforced slabs with internal girders. The roof slab consists of a monolithic slab with additionally prestressed beams. The internal forces were calculated using SCIA Engeneer 19.0 and these values were subsequently verified by manual calculation. The design followed the applicable European standards. The result of the work is a static assessment of the object and corresponding drawing documentation.
|
|
|
Commercial building in Brno - the construction technological planning
Sedláček, Stanislav ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The aim of my thesis was to perform construction and technological preparation of the construction of commercial house in Brno in the street Křídlovická. The introduction contains the expected design and construction process of the proposed building as a whole. It is also prepared a preliminary draft of the financial cost of the entire project designed according THU and object schedule. Furthermore, the implementation of the project construction site for a major part of the commercial house. Gradually work focuses mainly on the implementation of the technological stage of construction site with detailed processing procedure for the implementation of monolithic concrete structures of the building.
|
|
|
Construction technological project of sports hall construction
Tkáč, Jiří ; Vlčková, Jitka Laura (referee) ; Diaz, Yvetta (advisor)
The thesis deals with Komenského Street sports hall construction in Lysá nad Labem. Although partially dealing with construction of all parts, in detail it studies gym construction, focusing on time management, technology and resources of implementation. The thesis is divided into the drawing and text parts. The former includes site facilities design and building situation. The latter consists of the main part construction project implementation study, itemized budget, time schedule, technological regulations, inspection and testing plan for the implementation of the main construction part 1st floor reinforced concrete columns and walls, construction machines and mechanisms design as well as time and financial schedule.
|
|
| |
|
| |
|
|
Reinforced concrete structure
Zatloukal, Bohuslav ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor project is focused on the design of monolithic reinforced concrete ceiling structure of the first floor of a hotel and creation design documents of the load-bearing elements. The load-bearig elements (ceiling slab, outer rib, column and core wall) are appraised according to ultimate limit state. For calculation of internal forces was used a software named RFEM and the internal forces were verified by simplified manual method. Assessment is done according to ČSN EN 1992-1-1.
|
guest ::
