|
|
The effect of magnetic field and other selected stressors on physiology of bacterial cells
Mrázová, Kateřina ; Mravec, Filip (referee) ; Obruča, Stanislav (advisor)
This thesis deals with the effect of magnetic field and organic substances, namely benzene and p-nitrophenol, on cell of PHA producing bacteria Cupriavidus necator H16 and mutant strain Cupriavidus necator PHB4, which does not produce polyhydroxyalkanoates. Static magnetic field was generated by both permanent magnet and electromagnet. The effect of magnetic field on the growth of bacterial cells was studied using growth curves. It was found that cultivation in magnetic field and mineral medium mostly inhibits bacterial growth. Also the amount of polyhydroxyalkanoates was observed using FT-IR, flow cytometry and microscopy with fluorescent dye. Growth curves and flow cytometry were also used to study the influence of organic substances on bacterial cells. It was found that while benzene does not affect either C. necator H16 or C. necator PHB4, p-nitrophenol acts as the inhibitor of bacterial growth for both cultures. Finally the impact of p-nitrophenol on the accumulation of PHA was studied using gas chromatography.
|
|
|
Benzene in petroleum-derived products and health protection
Bílková, Karolina ; Kořínek, Pavel (referee) ; Stránský,, Vladimír (advisor)
Benzene is very toxic compound, which has carcinogenic and mutagenic effects. Result of these effects is significant reduction of its use and also low hygienic limits in occupational environment and environment. The aim of this diploma thesis was to map out possible exposure to benzene and checking of clasification correctness of motor gasoline and benzine (cleaners, thinners etc.). Determination of benzene was carried out by gas chromatography with flame ionisation detector (GC/FID) and high performance liquid chromatography with diod array detector (HPLC/DAD). Marginally, the diploma thesis was focused on determination of toluene (in june 2007 became effective ordinance no.284/2006 Sb., which forbid to sell products that contain more than 0,1 % of toluene to small consumers). Toluene was determined by same methods as benzene.
|
|
|
Air quality monitoring in areas with high traffic load
Ličbinský, Roman ; Huzlík, Jiří ; Hegrová, Jitka
Emissions of pollutants are one of the most serious problems of transportation, particularly as a result of a significant risk to human health. The causes of emissions of pollutants to ambient air are the exhaust gases generated by the combustion of fuel in motor vehicles. They are complex mixtures containing hundreds of chemical substances at different concentrations contributing to long-term warming of the atmosphere, the so-called "greenhouse effect" or often with toxic, mutagenic and carcinogenic properties for humans. The presented methodology was developed within project TE01020168 - Center for effective and sustainable transport infrastructure (CESTI) with the financial support of the Technological Agency of the Czech Republic within the Competence Centres Programme. Its aim is to unify the procedures for the implementation and evaluation of air quality monitoring in order to provide objective information on the actual status and development of air quality in areas with intensive transport. It summarizes the legislatively defined requirements for air quality monitoring and at the same time defines the pollutants whose very important source is transport and which should be monitored when assessing the impact of transport on air quality: nitrogen dioxide, (nano)particles, benzene, or platinum group elements and benzo[a]pyrene. The methodology can be used by the Ministry of Transport, road owners or their managers (ŘSD, regions and municipalities) as an effective tool for controlling both long-term monitoring and indicative measurements of air quality in the vicinity of roadways. At the same time, it will find application to metering processors and organizations providing their own air quality measurement to provide a standardized procedure to ensure a precise air quality assessment based on real data. The methodology will also help to deepen the knowledge of the staff of all the mentioned institutions and provide a standardized procedure for which, for example, contracting authorities may refer to public procurement.
Fulltext:  PDF
|
|
|
The effect of magnetic field and other selected stressors on physiology of bacterial cells
Mrázová, Kateřina ; Mravec, Filip (referee) ; Obruča, Stanislav (advisor)
This thesis deals with the effect of magnetic field and organic substances, namely benzene and p-nitrophenol, on cell of PHA producing bacteria Cupriavidus necator H16 and mutant strain Cupriavidus necator PHB4, which does not produce polyhydroxyalkanoates. Static magnetic field was generated by both permanent magnet and electromagnet. The effect of magnetic field on the growth of bacterial cells was studied using growth curves. It was found that cultivation in magnetic field and mineral medium mostly inhibits bacterial growth. Also the amount of polyhydroxyalkanoates was observed using FT-IR, flow cytometry and microscopy with fluorescent dye. Growth curves and flow cytometry were also used to study the influence of organic substances on bacterial cells. It was found that while benzene does not affect either C. necator H16 or C. necator PHB4, p-nitrophenol acts as the inhibitor of bacterial growth for both cultures. Finally the impact of p-nitrophenol on the accumulation of PHA was studied using gas chromatography.
|
|
|
New sampling approaches for evaluation of real remediation studies
Kroupová, Kristýna ; Cajthaml, Tomáš (advisor) ; Innemanová, Petra (referee)
This diploma thesis has been carried out as a part of the project Utilization of long term (passive) sampling methods combined with in situ microcosms for assessment of (bio)degradation potential (PASSES). In the frame of the project groundwater remediation took place in the premises of Farmak a.s. in Olomouc using a pilot photooxidation unit and efficiency of the remediation was monitored through passive and active sampling methods. Pilot photooxidation unit is a technology based on the H2O2/UV-C photochemical oxidation of organic pollutants. In this work optimization tests of the pilot photooxidation unit were performed. The residence time of the groundwater in the photoreactors, required for its sufficient decontamination from pharmaceuticals and aromatic hydrocarbons, was 2.5 hours. 91% degradation of the pharmaceuticals and 80% degradation of aromatic hydrocarbons were reached during this interval. Although the removal efficiency of the pharmaceuticals by the photooxidation unit was high, the pilot photooxidation unit was not able to effectively remove the pharmaceuticals at the studied locality. By comparing the results of the pharmaceuticals from active and passive groundwater sampling during the remediation attempt, passive Polar Organic Chemical Integrative Sampler (POCIS) was found to be...
|
|
|
Benzene in petroleum-derived products and health protection
Bílková, Karolina ; Kořínek, Pavel (referee) ; Stránský,, Vladimír (advisor)
Benzene is very toxic compound, which has carcinogenic and mutagenic effects. Result of these effects is significant reduction of its use and also low hygienic limits in occupational environment and environment. The aim of this diploma thesis was to map out possible exposure to benzene and checking of clasification correctness of motor gasoline and benzine (cleaners, thinners etc.). Determination of benzene was carried out by gas chromatography with flame ionisation detector (GC/FID) and high performance liquid chromatography with diod array detector (HPLC/DAD). Marginally, the diploma thesis was focused on determination of toluene (in june 2007 became effective ordinance no.284/2006 Sb., which forbid to sell products that contain more than 0,1 % of toluene to small consumers). Toluene was determined by same methods as benzene.
|
|
| |
|
|
Měření (P, Vm, T) chování systému oktan + benzen při teplotách 298.15 K až 328.15 K a při tlacích do 40 MPa
Morávková, Lenka ; Wagner, Zdeněk ; Linek, Jan
The densities of (octane + benzene) were measured at elevated pressures (0.1 to 40) MPa at four temperatures over the range 298.15 K to 328.15 K with a high-pressure apparatus. The high-pressure density data were fitted to the Tait equation and the isothermal compressibilities were calculated with a novel computation procedure with the aid of this equation. The lowand high-pressure values of excess molar volume V E m calculated from the density data show that the deviations from ideal behaviour in the system are practically independent of temperature and decreases slightly as the pressure is raised. The V E m data were fitted to the fourth-order Redlich–Kister equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters.
|
|
|
Modulární metodiky pro přípravu různých aryl C-2'-deoxyribonukleosidů
Joubert, Nicolas ; Bárta, Jan ; Urban, Milan ; Hocek, Michal
A modular methodology for the syntheses of various substituted aryl C-2´-deoxyribonucleosides has been developed. In each series, a larger scale synthesis of a versatile halogenated C-nucleoside intermediate has been accomplished, followed by its use for a generation of diverse derivatives by displacement of the halogen for alkyl, aryl or amino substituents by cross-coupling or amination reactions. Subsequent deprotection gave the final desired C-2´-deoxyribonucleosides. This methodology has been applied for the development of modular syntheses of 4- or 3-substituted benzene C-nucleosides, 6-substituted pyridin-2-yl C-nucleosides, 6-substituted pyridin-3-yl C-nucleosides and 5-substituted thiophen-2-yl C-nucleosides.
|
|
| |
guest ::
