|
| |
|
|
Electromagnetic field calculation of Induction machine for different mechanical load
Hetflajš, Martin ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
This bachelor’s thesis deals with an analysis of the induction machine electromagnetic field distribution with real parameters. Whole analysis was done for three point of the mechanical load by finite element method in ANSYS. In the next part is described a basic theoretically research of the electromagnetic field and also preliminary survey of the numeric method for FEM. This thesis also contains an analysis of electromagnetic model of analyzed induction machine with detailed description of each analysis step and in conclusion the results summary was done.
|
|
|
Mechanical Torque Analysis of Induction Machine Based on Magnetic Circuit Saturation
Skalka, Miroslav ; Bendl,, Jiří (referee) ; Voženílek, Petr (referee) ; Ondrůšek, Čestmír (advisor)
e main goal of this thesis is mechanical torque analysis of induction machine based on magnetic circuit saturation, oversaturated areas classification and the possibility of oversaturated areas reduction of their influence on machine properties. Whole problem is solved by finite element method in ANSYS program. Work is divided into the description and creating of electromagnetic model, a method of the induction machine equivalent circuit parameters determination, the electromagnetic field calculation by finite element method, experimental measurement using LabVIEW program with measurement accessories (PCIe card National Instruments), data processing program in DIAdem, results analysis of calculations in terms of magnetic circuit saturation, the influence of magnetic circuit material based on electromagnetic field distribution and the magnetic flux density along the air gap including spectral analysis using MATLAB and the electromagnetic torque and its parasitic torque components calculation.
|
|
|
Heat measurement of electric machine
Trnka, Zbyněk ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
The aim of this bachelor´s thesis was to familiarize with various methods of measurement of the temperature of electrical machines with cooling. The introduction of this work is dedicated to basic terms and definitions from spheres of advection, circulation, losses and heat removal from electric machine. The attention is especially devoted to contact measurement by means of thermocouples and next the measurement of temperature without contact. Finally, the work goes into analysis of losses, heat removal and measurement of the temperature of asynchronous machine.
|
|
| |
|
|
Improvement Power Parameter of Small Induction Motors
Halfar, Tomáš ; Ondrůšek, Čestmír (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.
|
|
| |
|
|
Calculation of the cooling medium in the asynchronous
Trnka, Zbyněk ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
The aim of this master´s thesis was to model the fan for the induction motor, and then to solve this model using Ansys CFX in the terms of flow, when considering the different speeds of rotation of the rotor. The introduction of this work is dedicated to basic terms and definitions from spheres of fluid flow, cooling of the electrical machines, especially to the cooling of the asynchronous machine. There is also attention paid to losses in this machine. Finally, there is modeled radial fan and an air gap of specified induction machine. By using Ansys CFX the flow, which passes from the fan into the air gap, is analyzed.
|
|
|
Magnetic field analysis with finite element method and magnetic sensor
Volf, Tomáš ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
The magnetic field analysis by MKP and magnetic probe project deals with magnetic field analysis of asynchronous machine cross section. This analysis is written in detail along with the necessary theory of asynchronous machine and the ANSYS program. The magnetic field of selected machine is measured by magnetic probe and results are compared with calculation. The next part of thesis is draft of device for the magnetic field analysis.
|
|
|
Thermal analysis of induction machine
Grmela, Petr ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
This thesis is dealing with thermal fields and the possibilities of their solution by a finite element method. Thereinafter thesis describe assembling a 3D model of induction machine with known parameters, and solving thermal field of the model by Ansys Workbench program and verification of these results by practical measuring on real machine.
|
guest ::
