|
|
The options of the joining of tube components
Holusek, Maxmilián ; Štroner, Marek (referee) ; Peterková, Eva (advisor)
The bachelor thesis deals with tube components joining methods. In the thesis, the preparation of the tube components is mentioned, as well as its tools and machines for cutting and adjusting the components. Furthermore, the work introduces several joining methods such as soldering and brazing, welding, pressing technology, adhesive bonding and threaded connection. The basic principle is described for each method, as well as using tools and machines plus advantages and disadvantages. In the end, the use of tube components is presented.
|
|
|
Bonding in the automotive industry
Krejčí, Adam ; Hanáčková, Pavla (referee) ; Kubíček, Jaroslav (advisor)
The thesis presents a literature study of adhesive bonding technology. The work deals with the advantages and disadvantages of adhesive bonding, design of adhesive joints, technological processes of adhesive bonding and the division of adhesives. The thesis also discusses various materials used for the construction of car bodywork and their properties. The main focus of the work is on the use of adhesive bonding in the car industry, comparing traditional and modern technology used for the construction of bus bodywork. In the experimental part of the thesis, the aim is to reveal the influence of surface treatment on the resulting shear strength when employing metal to metal bonding.
|
|
|
Joining of CFRP and metal parts
Dolinský, Jiří ; Urík, Tomáš (referee) ; Symonov, Volodymyr (advisor)
Tato práce popisuje základní principy spojování kompozitních materiálů a také spojování kompozitních materiálů s kovovými protikusy. Hlavním cílem této práce je navrhnout vhodný návrh spoje mezi kovovým závěsem a nosníkem křídla z uhlíkového kompozitu pro létající automobil AeroMobil 3.0. Pro výpočet napěťové analýzy byla použita speciální analytická metoda, která byla provedena za pomoci počítačových softwarů MATLAB a Excel. Konečný návrh spoje je vymodelován pomocí softwaru Autodesk Inventor. Předložené řešení není prakticky testovánu a tudíž by mělo být považováno pouze za přibližný návrh budoucího konstrukčního řešení.
|
|
| |
|
|
Modern forming technology in engineering
Čajan, Tomáš ; Schwarzer, Emil (referee) ; Dvořák, Milan (advisor)
Focus of this thesis lays on modern forming technology in engineering, especially technologies used for press joining of sheet metal. It also deals with modern technology in welding and adhesive bonding and contains literary study of these technologies with further comparison of their advantages and disadvantages.
|
|
|
Testing bonded steel sheet coated with zinc
Zedníček, Zbyněk ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
The aim of this master´s thesis is the design chosen for testing bonded joints on the specified galvanized steel sheet in laboratory conditions and obtaining parameters of bonded joints for application in industrial practice. Basic tests for testing bounded joints were presented in the work. Subsequently, two tests were selected and verified in laboratory conditions. The result of these tests are specific numerical values that were compared with values gained during tests linking method clinch.
|
|
|
Sheets bonding and their testing
Straka, Jan ; Kandus, Bohumil (referee) ; Dvořák, Milan (advisor)
The aim of this bachelor thesis is to design selected load tests for bonded joints at specified steel sheet DC01 under laboratory conditions and to compare the strength of the degreased joints with technical alcohol and uncrushed joints. The basic methods of joining thin sheets are presented in the thesis. The following is an overview of test methods for bonded sheets according to the relevant technical standards. The results of the selected tests are the specific numerical values that have been compared with those reported by the manufacturer of the particular adhesive.
|
|
|
The options of the joining of tube components
Holusek, Maxmilián ; Štroner, Marek (referee) ; Peterková, Eva (advisor)
The bachelor thesis deals with tube components joining methods. In the thesis, the preparation of the tube components is mentioned, as well as its tools and machines for cutting and adjusting the components. Furthermore, the work introduces several joining methods such as soldering and brazing, welding, pressing technology, adhesive bonding and threaded connection. The basic principle is described for each method, as well as using tools and machines plus advantages and disadvantages. In the end, the use of tube components is presented.
|
|
|
Bonding in the automotive industry
Krejčí, Adam ; Hanáčková, Pavla (referee) ; Kubíček, Jaroslav (advisor)
The thesis presents a literature study of adhesive bonding technology. The work deals with the advantages and disadvantages of adhesive bonding, design of adhesive joints, technological processes of adhesive bonding and the division of adhesives. The thesis also discusses various materials used for the construction of car bodywork and their properties. The main focus of the work is on the use of adhesive bonding in the car industry, comparing traditional and modern technology used for the construction of bus bodywork. In the experimental part of the thesis, the aim is to reveal the influence of surface treatment on the resulting shear strength when employing metal to metal bonding.
|
|
|
Sheets bonding and their testing
Straka, Jan ; Kandus, Bohumil (referee) ; Dvořák, Milan (advisor)
The aim of this bachelor thesis is to design selected load tests for bonded joints at specified steel sheet DC01 under laboratory conditions and to compare the strength of the degreased joints with technical alcohol and uncrushed joints. The basic methods of joining thin sheets are presented in the thesis. The following is an overview of test methods for bonded sheets according to the relevant technical standards. The results of the selected tests are the specific numerical values that have been compared with those reported by the manufacturer of the particular adhesive.
|
guest ::
