|
|
Design and analysis of electronically reconfigurable filtering structures
Kříčka, Tomáš ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis deals with the proposal of analog filters with the ability of the electronic reconfiguration. The main aim was to propose three fully electronically reconfigurable filters using different methods. The work focuses on the use of modern active elements that ensure the electronic reconfiguration. Specifically on operational transconductivity amplifiers, second-generation current conveyors and current amplifiers. The transfer functions are simulated in the Orcad PSpice software, at the ideal and behavioral level. Sensitivity and parasitic analysis is applied to the two proposed filtration structures. Both structures are made on printed circuit boards, which are measured and then their transfer functions are compared with the simulated functions.
|
|
|
Active Filters and their Transformation to Differential Structures
Bečková, Zuzana ; Herencsár, Norbert (referee) ; Vrba, Kamil (advisor)
Bachelor thesis is considered with transformation of single--ended frequency filters to fully--differential structures. Theoretical part contains a brief introduction to frequency filters and short summary of important features of signal flow graphs. Active elements, which are used in designed filters, are shown in the third chapter. Practical part of the thesis shows five single-ended filters (one already published, four newly designed) and their transformation to fully-differential structures. Results of simulations in programms OrCAD and SNAP are shown.
|
|
|
Analysis of differential and non-differential filtering structures with adjustable current amplifier
Dvořák, Jan ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.
|
|
|
Utilizing Unconventional CMOS Techniques for Low Voltage Low Power Analog Circuits Design for Biomedical Applications
Bay Abo Dabbous, Salma ; Horský, Pavel (referee) ; Ďuračková, Daniela (referee) ; Khateb, Fabian (advisor)
Tato disertační práce se zabývá navržením nízkonapěťových, nízkopříkonových analogových obvodů, které používají nekonvenční techniky CMOS. Lékařská zařízení na bateriové napájení, jako systémy pro dlouhodobý fyziologický monitoring, přenosné systémy, implantovatelné systémy a systémy vhodné na nošení, musí být male a lehké. Kromě toho je nutné, aby byly tyto systémy vybaveny baterií s dlouhou životností. Z tohoto důvodu převládají v biomedicínských aplikacích tohoto typu nízkopříkonové integrované obvody. Nekonvenční techniky jako např. využití transistorů s řízeným substrátem (Bulk-Driven “BD”), s plovoucím hradlem (Floating-Gate “FG”), s kvazi plovoucím hradlem (Quasi-Floating-Gate “QFG”), s řízeným substrátem s plovoucím hradlem (Bulk-Driven Floating-Gate “BD-FG”) a s řízeným substrátem s kvazi plovoucím hradlem (Bulk-Driven Quasi-Floating-Gate “BD-QFG”), se v nedávné době ukázaly jako efektivní prostředek ke zjednodušení obvodového zapojení a ke snížení velikosti napájecího napětí směrem k prahovému napětí u tranzistorů MOS (MOST). V práci jsou podrobně představeny nejdůležitější charakteristiky nekonvenčních technik CMOS. Tyto techniky byly použity pro vytvoření nízko napěťových a nízko výkonových CMOS struktur u některých aktivních prvků, např. Operational Transconductance Amplifier (OTA) založené na BD, FG, QFG, a BD-QFG techniky; Tunable Transconductor založený na BD MOST; Current Conveyor Transconductance Amplifier (CCTA) založený na BD-QFG MOST; Z Copy-Current Controlled-Current Differencing Buffered Amplifier (ZC-CC-CDBA) založený na BD MOST; Winner Take All (WTA) and Loser Take All (LTA) založený na BD MOST; Fully Balanced Four-Terminal Floating Nullor (FBFTFN) založený na BD-QFG technice. Za účelem ověření funkčnosti výše zmíněných struktur, byly tyto struktury použity v několika aplikacích. Výkon navržených aktivních prvků a příkladech aplikací je ověřován prostřednictvím simulačních programů PSpice či Cadence za použití technologie 0.18 m CMOS.
|
|
|
The Tolerance Analysis of Filters with CDTA
Miksl, Jan ; Jeřábek, Jan (referee) ; Šotner, Roman (advisor)
The bachelor thesis deals with the concept, design, modeling, tolerance and sensitivity analysis of the KHN filter using CDTA. The first part contains theoretical introduction about filters and their general properties. Secondly, the CDTA element, its block structure, schematic symbol as well as its circuit features are defined. Standard KHN filter structure with operational amplifiers is simulated. Results of this simulation are used for comparison with simulations results of CDTA KHN filter structure. The multifunctional CDTA KHN filter structure is simulated using ideal CDTA models, third-level models and models based on professional macromodels of attainable components (AD 844, MAX 435). Then tolerance and sensitivity analyses are explained and described. The following section discusses ways of modifying the structure and design KHN structure with CDTA models 3rd level. In the last chapter the circuit is optimized using PSpice and the attention is focused on achieving the best possible involvement of the typical characteristics of the elements of tolerance. In conclusion, the results of simulations are evaluated, compared the characteristics of circuit before and after optimization, and mention the advantages and disadvantages of filter elements with CDTA.
|
|
|
Analogue emulators of fractional-order circuits
Kubát, Pavel ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
Diploma thesis deals with circuits contain fractional-order elements. The first part of this paper deals with this problem, there were also described methods of design fractionalorder elements and types of circuits containing the fractiona-order elements which can be applied in practice. Used active elements for practical part can be found in the second chapter. Design of GIC circuits and implementation of fractional-order element inside the circuit are shown in the last chapture. Parasitic analysis and stability of frequency filter containing fractional-order element had been also described.
|
|
|
Analysis, features and applications of available current mode multipliers
Miksl, Jan ; Jeřábek, Jan (referee) ; Šotner, Roman (advisor)
The diploma thesis deals with analysis, validation, measurement of parameters of the commercially available current multiplies (namely the EL2082 and EL4083) and their applications in practice. Control analysis are carried out in OrCAD PSpice program and compared with values from datasheets. Control analysis are focused on AC and DC characteristics of these active blocks. There are discusses the input impedance, the output impedance, the current gain and the possibility of electronic adjusting. The parameters of the elements were verified by measurements. Proposals for circuit applications (selective circuit, oscillator, frequency filter) with EL2082 and EL4083 are presented and analyzed in the program OrCAD. Three oscillator circuit designs are experimentally tested and the results are compared with the theoretical expectations and simulations in OrCAD. The possibility of electronic control for oscillators is examined. Also the sensitivity and the tolerance analysis are carried out. The constructional details of oscillators are presented at the end of this work.
|
|
|
Electronically tunable frequency filters
Štěpán, Radim ; Jeřábek, Jan (referee) ; Herencsár, Norbert (advisor)
This bachelor thesis deals with a proposal of electronically controllable filters by means of modern active elemental parts such as current conveyors, transconduct amplifiers or programmable current amplifiers. The suggestion of new connection of frequency filters uses graphic chart of active and passive elements. In the introduction there is described the survey of signal flow graphs, modern active elements suitable for proposal frequency elements. The procedure of proposal of controllable frequency filter based on set typical formula of designed circuit is demonstrated as an example. On a basis of different modifications the designed circuit is made with various types of active elements. Simulation results of the program PCspice confirmed the proper working of the proposal circuits.
|
|
|
Applications of multi-output active elements in current-mode
Maňas, Stanislav ; Jeřábek, Jan (referee) ; Šotner, Roman (advisor)
Bachelor's thesis deals with analyzing the characteristics of the block in current mode CCII and its applications. The first part is devoted to the theory of CC block, the theory of CCII block his peripheral involvement and exploration properties. The second part is a third model levels and this is carried out sensitivity and tolerance analysis of individual involvement. The third part is a block CCII surveyed as part of participation frequency filters and oscillators. One involvement has been experimentally tested. At the end of each subsection is obtained by a comparison of the characteristics of individual involvement.
|
|
|
Current amplifier applications in differential frequency filters
Bokůvka, Tomáš ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
Bachelors’s thesis focuses on selection and analysis of suitable filtering structures working in current mode. In the first part, there is a common description of frequency filters in terms of function and division. The following text discusses the issues of active elements that creates basic construction of these filtering structures. Core of each circuit is formed by digitally adjustable current amplifier DACA, which enables change of amplification. Another used active elements are universal curret conveyor UCC, dual-output current follower DO-CF, multi-output current follower MO-CF, operational transconductance amplifier OTA and balanced-output transconductance amplifier BOTA. In the last part, there are described four chosen applications of frequency filters. There are introduced calculations of passive components a results of simulations. For experimental confirmation there are chosen two fully-differential structures. The end of work contains summary of measurements of these two frequency filters
|
guest ::
