|
|
Supermarket in Olomouc
Brodecká, Denisa ; Bukovská, Pavla (referee) ; Pilgr, Milan (advisor)
The assigment for bachelor thesis was design and check of load-bearing steel structure in Olomouc in Moravia. The ground dimension are 24 x 40 m, height is 10 metres. The building construction is designed as a single hall with double-pitch roof and a slope 9°. Main frame is based on plate frame with anxial range 5 m. Transverse bracing ensure the rigidity of the structure from the plane of the frame. Wall cladding is storage on column and roof cladding is on purlins. The materiál used is steel S235. Bachelor thesis includes the assesment of the main load bearing structure elements, design of the selected details and their drawing solutions.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Static design of the structure composed of combination of steel and structural glass
Potůčková, Simona ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The objective of the bachelor thesis is to design the load-bearing construction system and its cladding made of a combination of steel and structural glass and to verify its sufficient resistance. The object has rectangular floor plan with dimensions of 7,5x10,5 m and and its total height is 24,5 m. The building is located at the suburban area of the city Ostrava, precisely Ostrava Poruba. The construction is composed of a ground floor and six upper floors. The main load-bearing system consists of steel frame formed by six tubular columns connected beams and sway bracings ensuring the spatial rigidity of the structure. The object was designed according to currently valid standards using ULS and SLS verification.
|
|
|
Sports hall
Štelc, Martin ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
This diploma thesis deals with the design expertise and supporting structures the single-roof sports hall for locality Brno. The ground plan dimensions are 42 x 72 m and ground clearance of about eight meters. Two variants are processed and selected variant is elaborated in detail. The sports hall is designed for most sports played indoors. In a static calculation are designed and assessed the main load-bearing elements such as truss glued laminated timber, wooden purlins, columns, girts and bracing. The work includes drawings.
|
|
|
Steel Production Hall
Svoboda, Petr ; Pilgr, Milan (referee) ; Karmazínová, Marcela (advisor)
The aim of the bachelor thesis is the design and assessment of a steel two-bay hall for industrial production in Znojmo. The hall has a rectangular plan with a width of 36 m (18 m and 18 m) and a length of 75 m. The total height of the supporting structure is 10.6 m. The hall houses a bridge crane with a capacity of 5 t. The supporting structure consists of trusses, full-wall columns, stiffeners and full-wall trusses.
|
|
|
The Roofing of the Sport Hall
Müller, Radek ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
In my project I dealt with a proposal pool roof in the town of Brno. As the main construction material was used glued laminated wood. For affiliate structure was used steel and solid wood. Construction has a span of approximately 40 meters, length 60 meters and a height about 11.5 meters. For a given type of structure and for aesthetic and ergonomic reasons, decided to design a curved beam of glued laminated timber supported by a pillar of glued laminated timber. End of the cantilever beam is supported by a steel column.
|
|
|
The roofing of amphitheatre in Vizovice
Kuchtová, Ludmila ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The scope of this bachelor’s thesis is to design roofing over a natural amphitheater stage in Vizovice. The structure is designed as a variable structure in verison of both steel and timber. Each solution has a different structural composition. The layout is triangular with width of 18 meters and length of 15 meters. The height of the roofing is considered to be 9 meters.
|
|
|
Roof Structure of Bus Station
Roušar, Martin ; Šmak,, Milan (referee) ; Barnat, Jan (advisor)
The scope of the thesis is to design a roof substructure bus station in the area of Vysoké Mýto. The structure is designed of steel S355. This is the platform on the roof of two islands. The thesis has been processed by solving two variants, each variant were considered the main structural elements and then comparison was made between the two variants. Of these, one variant was selected for further processing. The first variant has a plan shape of a triangle with maximum dimensions of 58.00 m x 26,75 m. The main load-bearing structure consists of steel columns and girders of rolled sections, or HEB of castellated beams. The girders is the roof structure from rolled I profiles. Covering the roof is designed from the glass with supporting substructure of aluminum profiles. Rigidity is ensured in two ways braces of steel bars. The second option (which was selected for further processing) is L - shaped ground plan with maximum dimensions of 55,25 m x 33.40 m. The main supporting structure is made of rolled steel frames, HEB profiles and rods of steel bars. Supporting roof structure is designed of steel rolled I profiles. Roofing is again solved using the glass structure of aluminum profiles. Rigidity is ensured in two ways braces of steel bars.
|
|
|
The steel roof structure of a hall
Havíř, František ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The aim of this bachelor’s thesis is to design the steel roof structure of a sport hall in the area of city Olomouc. The plan dimensions of the hall are 55,0 x 35,0 m and height is 15,0 m. The solution is chosen from two preliminary variants. The roof construction is on the cross-section formed by the unbalanced circular arc. The main load bearing structure is created by planar circular lattice frames with height 1,8 m, which are hinged on the columns at one side, and on the other side tailed to the underlying structure. Between main bearing arches are solid purlins, which are radially arranged. Spatial solidity is provided by transverse and longitudinal bracings.
|
|
| |
guest ::
