|
|
Impact of winding on induction machine characteristics
Mikmek, Vladislav ; Janda, Marcel (referee) ; Mach, Martin (advisor)
This thesis deals with the analysis of a three-phase winding of an induction engine. After the theoretical introduction concerning different types of windings, two types of their analysis and the importance of the winding factor, two methods of analysis and design tools are explained: Görges diagram and Tingley scheme. This scheme is then used for the design of all possible variants of winding for a certain number of stator slots and the theoretical shape of magnetic field is analysed. The next step is a deeper software analysis of the engines with variants of windings with different coil pitches and number of conductors per slot. Especially the finite element method is used in this part. The obtained values and their characteristics of the simulated engines are compared numerically and graphically. Then the changes of important values for different windings are described. The optimal winding according to chosen requirements is chosen.
|
|
|
Special low-power induction motors.
Belica, Andrej ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
Master thesis deals with design and construction of the most widely used engines currently. Overall, it is divided into five chapters, the first chapter deals with constructional features of various three-phase asynchronous motors, the second chapter briefly paid attention to single-phase motors. The next chapter focuses on the specific engine types, which differ from standard induction motors in its design implementation. This is an engine with full rotor, hysteresis, linear and with shaded field. Although asynchronous motors are considered the most reliable machines work in imperfect conditions, it leads to frequent breakdowns. This is covered in chapter four. Based on the findings from previous chapters the fifth chapter includes a preliminary draft of the asynchronous motor with a full rotor. The last chapter is devoted to the measurement on functional models.
|
|
|
Single-Phase Induction Motor
Vácha, Pavel ; Lapčík, Josef (referee) ; Hájek, Vítězslav (advisor)
The bachelor work is concerned the thesis of a single-phase induction motor that´s perpetually more used in all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. The practical part contains a basic schema calculation of the single-phase induction motor with an auxiliary phase and a processing demonstrate example of calculation of the single-phase induction motor with concrete parameters along suggested process. In the conclusion there is the evaluation of the whole process.
|
|
|
Magnetic field analysis of synchronous machine
Volf, Tomáš ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
The Magnetic Field Analysis Project of Synchronous Machine deals with program for magnetic field analysis of synchronous machine cross section. This program is written in detail along with the necessary theory of synchronous machine and the ANSYS program. After this the program for using different types of sectional wires modification is made – in the concrete for round conductors. It is attained the numeric computing method – The Finite Element Method. To creation of the magnetic field simulation serves ANSYS program, which uses The Finite Element Method.
|
|
|
Production Comparison of High Voltage Winding of Dry Transformers
Mrajca, Miroslav ; Bulín, Tomáš (referee) ; Ondrůšek, Čestmír (advisor)
This bachelor thesis deals with the history, importance, usage, construction and principle of the operation of transformers. The thesis also focuses on the detailed description of the parts which the dry power transformer is composed from, as well as the description of their manufactory and following assembly into one unit. The thesis contains the comparison of different technologies of manufactory of higher voltage winding and magnetic circuit. The thesis contains a process of design of the dry transformer with an example of calculation. The output is a comparison of different high voltage winding technologies in terms of production costs and winding factor.
|
|
|
Design of oil distribution transformer
Mrajca, Miroslav ; Mach, Martin (referee) ; Ondrůšek, Čestmír (advisor)
This master thesis deals with the manufacturing process of oil distribution transformers. Firstly, the thesis devotes to the design arrangement of the magnetic circuit and its manufacturing technology. The procedure of cutting laminations for core and their building into the core. Subsequently, the thesis describes technologies used for manufacturing primary and secondary windings including procedures on winding machines. Then it deals with the production of the tank and the final assembly of the transformer into one unit. The next part of the thesis discusses the design procedure of the assigned distribution oil transformer with a numerical calculation while respecting the requirements of the standards. Finally, the costs of the material of the designed transformer are determined.
|
|
|
Magnetic field analysis with finite element method and magnetic sensor
Volf, Tomáš ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
The magnetic field analysis by MKP and magnetic probe project deals with magnetic field analysis of asynchronous machine cross section. This analysis is written in detail along with the necessary theory of asynchronous machine and the ANSYS program. The magnetic field of selected machine is measured by magnetic probe and results are compared with calculation. The next part of thesis is draft of device for the magnetic field analysis.
|
|
|
Losses reduction of single-phase induction motor
Vaško, Dávid ; Mach, Martin (referee) ; Vítek, Ondřej (advisor)
Bachelor thesis Losses reduction of single-phase induction motor deals with issues of increasing the efficiency of single-phase induction motor JMO90-4S-90 from EMP s.r.o. Slavkov near Brno. The first part deals with the theory of induction motors, especially single-phase motors and analysis of losses in induction machines. The second part deals with the introduction of motor solutions and methods used for loss reduction. In the third part, the thesis deals with the calculating selected parameters, the design of motors in RMxprt, and their modification for improving efficiency. The fourth part deals briefly with the design of motors in Ansys Maxwell, comparison of results obtained from Maxwell and RMxprt with the results from measurement for motor JMO90-4S-90 and comparison of results from Maxwell and RMxprt for other motor solutions.
|
|
| |
|
|
Solid State Tesla Coil
Pařenica, Jakub ; Mikláš, Ján (referee) ; Martiš, Jan (advisor)
The bachelor's thesis focuses on a theoretical description of the operation of Tesla's transformer, its design, including electronics, and its subsequent construction. The basic theory of the transformer replacement scheme is described. The Tesla transformer is generally described, as well as the methods of excitation of the primary side of the transformer, the generation of the discharge, the skin effect and the meaning of resonance. Furthermore, the work describes the construction of the primary coil holder, secondary coil. The work contains a pattern of the power board from the Eagle program, and everything is accompanied by photos. The work describes the recovery procedure and describes all the waveforms that were measured before and after the connection of the secondary coil.
|
guest ::
