|
|
Use of Multi-criteria Analysis for Evaluation Cableway Project Efficiency
Kotrla, Jakub ; Vaňková, Lucie (referee) ; Korytárová, Jana (advisor)
This thesis investigates the cableway project in the city of Vsetín. The theoretical part is describing the city, it’s demographic trends and also changes in the image of the city. The practical part is dealing with the abovementioned cableway project and is divided into several parts. The introduction is focused on a multi-criteria assessment of particular options of the cableway and fallowing a multi-criteria assessment of transport services in the housing development Sychrov. The multi-criteria assessment is carried out by some of variant calculations in order to specify the importance of criteria, weighting for criterion and calculation methods. This is followed by an assessment of the efficiency of transport links by the Cost Benefit Analysis – CBA method. This method is aimed to determine the most effective way of passenger traffic and to recommend an optimal option in consideration of not only incomes but also costs and contribution to beneficiaries, which are an important part of public projects.
|
|
|
Static verification and variant design of roof structure of winter sport stadium in Znojmo city
Kovář, Jindřich ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The subject of the thesis is the conversion and alternative proposals for the existing steel structure roofing winter stadium in Znojmo. The building has a rectangular shape with dimensions of 84 x 63 m Roof truss structure is formed purlins and trusses girlandovými, vynášenými two steel arches with a span of 84 m variant solution is full board and reduced lattice truss plate. After evaluating both solutions was chosen the first option, which was subsequently designed and assessed according to applicable standards. Truss plate is designed on the original footprint supported the original concrete bearing walls. Eye lattice plate is a square with sides of length 3.5 mA at 3 m Joints are designed truss balls and anchoring pin.
|
|
|
Analysis of erosion and runoff conditions in a selected catchment areas
Pavliš, Jaroslav ; Uhrová,, Jana (referee) ; Dumbrovský, Miroslav (advisor)
The subjekt of this Bachelor thes is was to develop ananalytic alanalysis of erosion and run off conditions in certain sub-basins. The analysis is performed in the area of interest, which consist soft he cadastral areas of Lubná u Poličky, Sebranice u Litomyšle, Kamenec u Poličky, Polička (Střítež), Lezník and Široký Důl. Erosion run off and run off conditions were analyzed on the basis of a total of 16 variants including the use off ivecomputational algorithms for factor L and S, culent state, chmate chase affecting factor R and K, and variol agrotechnical and organizational measures affecting factor ca P. For presentation of map and computational The ArcGIS program was used for the results of erosion and the Desq program was used for run off conditions, where the mutual data processing was enabled by the USLE 2D program. These results can then determine possible protective anti-erosion measures against property damage, which would be part of a comprehensive landscaping.
|
|
|
Dolní Lutyně - Residential Zone Design
Tkáčová, Klára ; Matuszková, Radka (referee) ; Radimský, Michal (advisor)
The aim of this bachelor´s thesis is the proposal of various solution of residential area in the village of Dolní Lutyně. It is mainly about finding a suitable arrangement of the construction lands in the defined territory, the resolution of transport infrastructure and static transport. All the variants have been extensively elaborated into a drawings- situations, longitudinal profiles and typical cross sections. The most optimal variant for the future investor was selected base on the selection and evaluation of the multi-criteria aspects.
|
|
|
Variants of Bypass Rosice
Plucarová, Eva ; Smítal, Petr (referee) ; Holcner, Petr (advisor)
The goal of the diploma thesis is to design and to assess a solution of a northern bypass of the road I/23, which will divert a transit traffic from Rosice. The town is situated approximately 25 kilometers west of Brno, in the South Moravian region. Three variants are worked out. The variant A and the variant B connects smoothly with a bypass of a neighboring village Zastávka. The variant A then copied a route designed in a local development plan and goes through a built-up part of the town Rosice in the area of the street Na Mýtě. The variant B is designed to avoid passage through this area and bypasses Rosice in north, behind a housing estate Kamínky. The variant C is designed in case an absence of a bypass of the village Zastávka. It connects with existing road I/23 in the village Zastávka in the area of an intersection of streets Lipová – Stará osada. The goal of the bypass is to divert the current transit traffic from Rosice
|
|
|
Sloup - Residential Zone Design
Kocman, Jan ; Matuszková, Radka (referee) ; Radimský, Michal (advisor)
Bachelor thesis focuses on north part of Sloup village, the main target is to design residential area. Site plan and site plan of road signs were designed for each of four variants. The crosssections fit to all variants which were designed. Two variants were chosen as the best ones, based on multicriteria evaluation. The more detailed site plan, longitudinal profile were processed for the two best variants.
|
|
| |
|
|
Static verification and alternative design of steel structure of winter sport stadium in Jindřichův Hradec
Holec, Tomáš ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The subject of this thesis is the conversion and alternative proposal to the existing steel structure roofing the winter stadium in Jindrichuv Hradec. The building has a rectangular plan with dimensions of 80 x 52 m. The roof structure consists of lattice trusses and purlins, plotted using lattice steel columns. The other possibilities are parabolic lattice trusses and purlin with fly bracing that were designed and evaluated in accordance with applicable standards. The solution using parabolic trusses is designed on the original footprint of the structure. The distance of each bond is 8 m.
|
|
|
Road studies III / 2405a and III / 2045
Müller, Jonáš ; Dibďák, Jan (referee) ; Kosňovský, Michal (advisor)
Subject of the bachelor thesis is a study of roads III/2405a and III/2045 in the Central Bohemian Region near the village Kněževes. The new road is part of a larger project, which aims to connect the D7 and D8 motorways due to the increasing traffic intensity in the area. The aim of this work is to suggest possible solutions for connecting road III/2405a to road III/2045.
|
|
|
The steel structure of a sports hall
Vaněček, Milan ; Pilgr,, Milan (referee) ; Štrba, Michal (advisor)
Master thesis is focused on design of steel roofing structure of sports hall. Construction is located in town of Jihlava. Proportions and disposition are in accordance of assignment of master thesis. The proportions are 40m x 60m, the height of structure is approximately 15m. Two versions of roof structure were designed – truss beam with shape of lentil and double reverse truss girders (girland truss). These versions were tentatively analyzed and designed for the main bearing members. Afterwards both of the versions were appraised and one of the versions was chosen for detailed treatment. It means there was attention focused on design of important details, creating of drawing documentation and technical report, all in the range of thesis supervisor. The valid Eurocodes were used.
|
guest ::
