|
| |
|
|
Description unsteady operating conditions of siphon swirl turbine
Krejčiřík, Stanislav ; Habán, Vladimír (referee) ; Hudec, Martin (advisor)
The master´s thesis focuses on the behavior of the siphon turbine during unsteady flow. There are two possible conditions. The first condition involves commissioning the turbine. In this situation turbine works like a pump. In the second case, it includes shutting down the turbine by aerating the siphon and thereby breaking the water column. This thesis deals with the second case, where the results of the experiment and the mathematical model are compared.
|
|
|
Influenc of Instability to Critical Heat Flux
Khůlová, Jitka ; Vojáčková, Jitka (referee) ; Suk, Ladislav (advisor)
This bachelor's thesis is elaborating about two-phase flow in the heated channel. It describes flow instabilities and their influence to critical heat flux. The calculation methods of two-phase flow are introduced. The homogeneous equilibrium method is selected for the practical part. The results are evaluated and possible solution to prevent flow instabilities is suggested.
|
|
|
Vizualization and optical measurements of two-phase flows for pressure-swirl atomizer
Janáčková, Lada ; Lízal, František (referee) ; Jedelský, Jan (advisor)
Tato práce se zabývá studií Simplex a SR verze původní trysky používané ve spalovací komoře malého proudového motoru. Pro lepší porozumění procesu rozprašování byl vyroben transparentní model obou trysek v měřítku 10:1. Tvorba spreje u tlakové vířivé trysky je komplexní proces dvoufázového proudění. Vnitřní a vnější proudění bylo zkoumáno pomocí Laserového Dopplerovského Anemometru a vysokorychlostní kamery při vstupních tlacích p = 0.5, 1.0 a 1.5 MPa s použitím kerosinu a p-Cymenu. Z hlediska vnitřního proudění byla provedena charakteristika vzdušného jádra a zkoumán vliv různých SFR hodnot na délku a průměr jádra. Dále byly objasněny rychlostní profily společně s jejich fluktuačními složkami vzhledem k Reynoldsovu číslu a použité kapalině. Také jednoduchý numerický model byl vyvinut k odhadu vnitřního proudění pomocí trackování částic. V případě vnějšího proudění byl zkoumán vliv vstupního tlaku na rozpadovou vzdálenost spreje a úhel kužele spreje.
|
|
|
The membrane wall of the boiler with an advanced flow control
Češla, Martin ; Tomáš, Zdeněk (referee) ; Tomáš,, Zdeněk (referee) ; Ing.Tomáš Zdeněk (referee) ; Pospíšil, Jiří (advisor)
The master thesis deals with hydraulic characteristics of once-through boilers and describes the problems which may arise during the flow of water through the evaporator. Especially the formation of aperiodic instability of the evaporator and hydraulic uniformity amongst every steam generating tube. The thesis describes parameters, which cause these problems, and solutions how to deal with them. The calculation has been done for evaporator of the boiler called K2 located in power station in Chvaletice.
|
|
|
Experiments critical heat flux
Štaffa, Petr ; Martinec, Jiří (referee) ; Suk, Ladislav (advisor)
The Bachelor’s thesis deals with phenomenon of critical heat flux in a core of nuclear reactor. The first part is dedicated to describe physical nature of critical heat flux and basic thermo mechanical and hydrodynamics terms. The second part is dedicated to summarize experimental investigations on critical heat flux and their process.
|
|
|
Large Eddy Simulation of Turbulent Two-Phase Flow
Volavý, Jaroslav ; Fürst, Jiří (referee) ; Vimmr, Jan (referee) ; Jícha, Miroslav (advisor)
Doctoral thesis deals with the numerical simulations of two-phase flows, especially with prediction of movement of dispersed phase (particles) carried by fluid. The Euler-Lagrange approach was applied for description of the system fluid-particles. It means that the fluid is considered to be continuum and its movement is described using Euler approach. Particles are regarded as mass points and their movement is solved using Lagrangian approach. The Large Eddy Simulation method was adopted for solution of the fluid flow. The series of simulations of the backward-facing step flow laden with particles were performed. The concentration of the particles in the flow was high enough for consideration of the influence of particles on the turbulence of the carrier phase. The developed scheme for generation of turbulence on the inlet is applied. The influence of anisotropic decomposition of subgrid energy on movement of particles was studied in the frame of this work.
|
|
|
CFD analysis of thermal stress of a tubesheet
Vince, Tomáš ; Babička Fialová, Dominika (referee) ; Rebej, Miroslav (advisor)
This diploma thesis focuses on the phenomena of multiphase flow in a steam generator as a one of probable causes of tubes and tubesheet weld cracking. In the first part of the work, a research was carried out focusing on the boiling and the phenomenon of two-phase flow in technical applications, its characteristics and properties. The thesis continuous with an overview of available numerical multiphase models in the ANSYS Fluent 2021 R1 and a research of previously published works focused on two-phase flow with the presence of boiling. The research is followed by a description of the particular boiler, which is part of the nitric acid production plant in the chemical company DUSLO, a.s., its operating conditions and a more detailed description of the issue that is being addressed in this thesis. The second part of the work continuous with a description of the computational model, including a description of the geometry of the model and used simplifications, the computational mesh and the description of boundary conditions. Important part is the description of calculation setting of steady-state and transient CFD simulations in ANSYS Fluent. Finally, the results of the two-phase flow calculation are presented and then discussed in the conclusions.
|
|
|
Modeling two-phase bubble flow in microfluidics
Stehlík, Martin ; Kozák, Jiří (referee) ; Rudolf, Pavel (advisor)
The goal of submitted thesis is to perform a computer simulation of bubble creation in T-channel. In the first section of the paper, the theoretical applications of microfluidic bubble, micromachines and droplet formation are described. In the second part of the text, author uses cross flowing method for simulation od bubble creation. Furthermore, several settings in computer simulation software Fluent are mentioned. In addition, the influence of velocity at the T-channel inlet on surface tension and on bubble length is presented.
|
|
|
CFD analysis of thermal stress of a tubesheet
Vince, Tomáš ; Babička Fialová, Dominika (referee) ; Rebej, Miroslav (advisor)
This diploma thesis focuses on the phenomena of multiphase flow in a steam generator as a one of probable causes of tubes and tubesheet weld cracking. In the first part of the work, a research was carried out focusing on the boiling and the phenomenon of two-phase flow in technical applications, its characteristics and properties. The thesis continuous with an overview of available numerical multiphase models in the ANSYS Fluent 2021 R1 and a research of previously published works focused on two-phase flow with the presence of boiling. The research is followed by a description of the particular boiler, which is part of the nitric acid production plant in the chemical company DUSLO, a.s., its operating conditions and a more detailed description of the issue that is being addressed in this thesis. The second part of the work continuous with a description of the computational model, including a description of the geometry of the model and used simplifications, the computational mesh and the description of boundary conditions. Important part is the description of calculation setting of steady-state and transient CFD simulations in ANSYS Fluent. Finally, the results of the two-phase flow calculation are presented and then discussed in the conclusions.
|
guest ::
