|
|
The robotic cell for car headlight assembly simulation
Hampl, Lukáš ; Baštán, Ondřej (referee) ; Kaczmarczyk, Václav (advisor)
This master´s thesis describes the design and realization of the simulation in program Tecnomatix Process Simulate. The thesis deals with the creation of a simulated assembly line of gluing a protective glass to the headlight. For this operation is using four stationary robotic arms. Created simulation behaves like a real robotic assembly line. In simulation is implemented several input sensors, robotic operations and conveyer structure. The control is done with PLC programmed, designed in TIA portal 14. Thesis includes a detailed description of the design whole simulation, together with the Tecnomatix Process Simulate environment. This software offer a many external commissioning and three bigger were tested, two kinds of OPC servers and PLCSIM Advanced. The conclusion of the diploma thesis describes the way of simulation control with visualization of whole process cell.
|
|
|
The Proposal of Material Flow Management
Pavlík, David ; Smíšková, Hana (referee) ; Juřica, Pavel (advisor)
This master’s thesis focuses on the problematics of the material flow management in the company. Thesis is divided into the theoretical, analytical, practical and proposal part. The theoretical part defines basic concepts of selected problematics. The analytical part of the work describes the company where the thesis is processed. The practical part deals with selected indicators of the company and describes the current state of the problem. The proposal part defines possible solutions and selects the best option for the material flow management.
|
|
|
Layout solution of the machining center producing the shaft component
Göth, Karel ; Osička, Karel (referee) ; Štroner, Marek (advisor)
The diploma thesis deals with the design of a machining center for a shaft-shaped component. For the design of the machine shop, it is necessary to obtain information from the production process and the drawing. This information, together with the number of pieces produced per year and the standard time for each machining operation, will allow the design to be carried out. In the first step, it is necessary to carry out capacity calculations, which will give us the necessary number of workers, machines, manual workplaces and production and non-production areas. Following this, it is necessary to place the machines on the production area based on the established method of arranging the machines. In addition to the production equipment, various other aspects of the production hall will also be located in this step, such as toilets, changing rooms, foremen's office, workshops, etc. It is necessary to ensure the optimal location of the individual parts of the production with the help of the Sankey diagram, which will allow us to visualize the material flow. The flow of material needs to be solved at multiple levels, namely inter-object transport of material, inter-operational transfers of material, technological operations with material and waste management. At the end, an economic evaluation of the proposed giant will be carried out.
|
|
|
The robotic cell for car headlight assembly simulation
Hampl, Lukáš ; Baštán, Ondřej (referee) ; Kaczmarczyk, Václav (advisor)
This master´s thesis describes the design and realization of the simulation in program Tecnomatix Process Simulate. The thesis deals with the creation of a simulated assembly line of gluing a protective glass to the headlight. For this operation is using four stationary robotic arms. Created simulation behaves like a real robotic assembly line. In simulation is implemented several input sensors, robotic operations and conveyer structure. The control is done with PLC programmed, designed in TIA portal 14. Thesis includes a detailed description of the design whole simulation, together with the Tecnomatix Process Simulate environment. This software offer a many external commissioning and three bigger were tested, two kinds of OPC servers and PLCSIM Advanced. The conclusion of the diploma thesis describes the way of simulation control with visualization of whole process cell.
|
|
|
Measurement of volume and mass flow in agricultural machinery
Kuře, Jiří ; Bohuslávek, Zdeněk (advisor) ; Volf, Jaromír (referee)
The aim of this work is to elaborate an overview of the principles of measurement of the volume flow and the mass flow of the material and present an overview of the actual and perspective use of these concepts on agricultural machines.
In the following chapters the author presents at first the overview of the flowmeters used in practice to measure the flow of materials, and further the description of the selected devices for measuring the flow of material in plant and livestock production. Last but not least the author presents the concept which deals with the recording of the local grain yield on harvester threshing machines by using technology of the flowmeters and GPS.
|
|
|
The Proposal of Material Flow Management
Pavlík, David ; Smíšková, Hana (referee) ; Juřica, Pavel (advisor)
This master’s thesis focuses on the problematics of the material flow management in the company. Thesis is divided into the theoretical, analytical, practical and proposal part. The theoretical part defines basic concepts of selected problematics. The analytical part of the work describes the company where the thesis is processed. The practical part deals with selected indicators of the company and describes the current state of the problem. The proposal part defines possible solutions and selects the best option for the material flow management.
|
|
|
Quality management system and its improvement
PIVOVARSKÁ, Jitka
These diploma thesis are oriented on a analysis of quality management system in Fezko a. s. Strakonice and propose possibilities for its improvement. Quality management system is in this company on high level. Company is certified according to ISO/TS 16949. The opportunities for system improvement were detected particularly in production control area and material flow. I propose using of modern quality management tools and implementing of lean manufacturing principles and Six Sigma methodology in production, including kaizen and kanban techniques.
|
|
|
Tok zboží ve firmě Telefónica O2 Czech Republic a.s.
Pospíchal, Jiří ; Mervart, Michal (advisor) ; Jirsák, Petr (referee)
Bakalářská práce se věnuje toku zboží ve skladu technologií společnosti Telefónica O2 Czech Republic a.s. Cílem práce je popis skladu technologií, jeho chod a tok materiálu tímto skladem. Dále se práce zaměřuje na problémy, které se ve skladu vyskytly a jejich řešení. Práce je rozdělena na dvě části - teoretickou a praktickou. Teoretická část se věnuje obecně skladům, skladování, manipulační technice a řízení zásob. Praktická část pojednává o skladu technologií společnosti Telefónica O2. Tato část je neveřejná.
|
guest ::
