|
|
Control and monitoring unit for optical link station
Podzimek, David ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
The aim of Master thesis "Control and monitoring unit for optical link station" is a web server, enabling communication microcontroller with the user. The communication is based on TCP/IP model. Work an overview of the various parts of the TCP/IP model. The main part of this work is devoted to the software created. The core of unit are microcontroller C8051F120 and ethernet controller CP2200 made by Silicon Laboratories.
|
|
|
Model of computer network in MATLAB/SIMULINK environment
Zedníček, Petr ; Zeman, Václav (referee) ; Kolka, Zdeněk (advisor)
The bachelor thesis deals with simulation of TCP protocol behaviour in Wireless optical environment. The thesis examines the various parameters of the protocol and evaluates their response to the transmission speed. The key objectives of the thesis are the introduction to the problems of communication, specially the description of the transport layer architecture, TCP / IP and congestion management mechanism NewReno. A large part of the thesis is devoted to modelling communication points and a model of optical wireless connections. The results will be applicable to create a new communication protocol for Wireless optical environment.
|
|
|
Comparison of Linux and Windows networking performance
Novotný, Radek ; Burget, Radim (referee) ; Komosný, Dan (advisor)
My Bachelor’s thesis aims to provide a comparison of the performance of servers, i.e. measuring the load of their processors, physical memory, and the whole operating system over network communication using UDP protocol. For this purpose, I developed my own programs. Theoretical part of this work concentrates on the general overview on computer networks and their categorisation according to the ISO OSI and TCP/IP network models. Main differences between network interfaces for both models are provided; the TCP and UDP structures, layers, communication and protocols are explained. The choice was made to measure values for a Linux server with Linux SUSE 10.3 distribution, and a Windows server with Windows server 2003 R2. A program was created so that clients could send data via the UDP protocol on servers. The program is also capable of measuring packet loss which is caused by increased load on the servers from communication itself. It is essential to determine which operating system can eliminate this issue in a better way as this a crucial parameter when selecting a data server. Measurements are comprised in charts comparing load and data loss for a given number of users.
|
|
|
Remote maintenance of the microcontroller systems
Vágner, Martin ; Hynčica, Ondřej (referee) ; Kučera, Pavel (advisor)
This thesis deals with methods of remote maintenance of microcontroller systems based on Atmel AVR family over the Ethernet interface and TCP/IP protocols. To create communication through TCP/IP, an embedded server NE-4100T is used. At the beginning, key features of the server and methods of handling with content of a program memory are discussed. The final solution is based on the bootloader method. It includes bootloader firmware and user program for PC. The hardware part covers design of interconnection electronics, DC-DC step down converter, real time clock and printed circuit board. The remote maintenance of program memory has been sucessfully solved, but the embedded server NE-4100T produces a problem with an auhentification without a sufficient solution.
|
|
|
Analog 0-20mA to Ethernet convertor
Štreit, Zdeněk ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
The dissertation deals with a design of an intelligent transmitter of a standard current signal with an Ethernet output port, an implementation of a web interface and Modbus TCP protocol for providing data protection. The introductory part describes standardized analogue technical signals with their possibilities, and characteristics of industrial Ethernet. The subsequent part provides an overview of alternatives to connect analogue signals to Ethernet while using various modules. The thesis continues with a suggestion of an analogue input side of the transmitter in connection with a digital module of Ethernet based on the Rabbit processor in connection with the RCM3200 module. The key part of the dissertation puts forward a proposal of the firmware transmitter and control web interface, shows ways of providing figures measured by the current loop via Ethernet interface for further processing. The final part is devoted to a description of current transmitter ultimate measurement.
|
|
|
LAN communication unit resistivity against Internet origination attacks
Valach, Michal ; Mlýnek, Petr (referee) ; Mišurec, Jiří (advisor)
This thesis is focused on crypto-module RCM 3700, which is used for encrypted data transmission. Following work analyses basic network protocols and some sort of attacks in Ethernet network. The main goal of these attacks is to collect information and services about the device and to analyze transmitted data. Based on these information attacks can be done more precisely than without them. The main target of these attacks is the denial of particulary service or data abuse. Furthermore, in the diploma thesis configuration of router CISCO 2801 is applied in order to improve the LAN security. The deveploment board, which includes reset function, supplied circuit and interface for RS 232, was designed for crypto-module RCM 3700.
|
|
|
Programming of processors in 32- or 64-bit operation systems
Rášo, Ondřej ; Kyselý, František (referee) ; Balík, Miroslav (advisor)
Main topic of this thesis is Win32 application programming interface and symbolic instructions programming language. It can be divided into four parts. First part sums the basics of 32-bit programming in symbolic instructions language in Windows. Second part describes the Win32 resources for computer intercommunication. Third part presents, describes and comments selected problems in symbolic instructions language.Last part covers a creation of an example application. This application and its parts will be the content of computer exercises in VUT Brno FEEC subject Počítače a jejich periferie.
|
|
|
Design and construction of modern data Wi-Fi networks for ISPs
MATLAS, Jiří
The topic of Wi-Fi networks (Wireless Fidelity) is widely discussed currently as there is a big boom of this technology. The Wi-Fi refers to a method of modern technology that enables wireless transmission of data between devices such as printers and mobile phones. The main objectives of the thesis are focused on the development proposal to build a modern data network for an ISP (Internet Service Provider) in the technical area. Another aim was to process and analyze the results of the newly formed economic entity and their subsequent evaluation in recent years, i.e for the years 2008 - 2011. Business plan was designed in Branišov, which is a village near Czech Budejovice in 2001. Initially, it was the agreement of two local residents who believed that the offer of an Internet connection is not ideal for this location and started to develop some "small" wireless network. At the beginning, any professional equipment was not used in this network. When connected with an increasing number of customers (about five inhabitants of Branišov), professional antennas and access points began to be used. The above mentioned five customers manage to cover all operating costs created by the network. In subsequent years, i.e. 2004 ? 2007, there was a boom of the project. The number of connected users was growing constantly, even though not conducted any marketing or promotional activities. By the end of 2006, individual users began to demand greater guarantee of a stable connection. At the same time, it also proved to be absolutely necessary to establish a specific person responsible for the network. This person was supposed to maintain the network, develop it and manage it. In 2007, the initial non-commercial network was transformed into a commercial network model and brand new commercial entity ? a limited liability company ? was created. Currently, there is a continual development of this network, which already covers a total of 30 villages around České Budějovice and Vodňany and the signal spread through 115 broadcasting Access Points.
|
|
|
Creation of router based on Linux
SUDA, Jiří
This thesis describes routers in general and their variants as well as the creation of my own PC issues linux-based router variant. It states pros and cons of this solution in detail. The administration and security are also mentioned.
|
|
|
Design of computer network training room
KRHÁNEK, Jiří
This project describe design of computer classroom for learning computer networking. At first I explain how create computer network. I decide about hardware and network items to use for realization fully functional computer network. Below I describe network setting in Operating Systems. At the end I fixate to solution particular cases which could be resolved by students in this computer classroom.
|
guest ::
