|
|
Applying a two degree of freedom model for drive-by identification
Bayer, Jan
A new concept of drive-by identification is examined applying the analogy with a Two Degree Of Freedom (DOF) system where the bridge is considered the ground-supported spring-mass and the moving spring-mass the second DOF. The response of the moving spring-mass is simulated on a bridge model using different road profiles and compared to parameters of the corresponding two DOF system. The focus is the spectral shift that can be observed on the moving spring-mass during its passage along the bridge and could possibly be applied for drive-by identification. The accuracy mainly depends on the relation of the moving spring-mass to the bridge mass and the relation between the natural frequency of the spring-mass and those of the bridge. The simulations showed that road profile can significantly reduce the accuracy of identified results, which imposes limits on practical applications.
|
|
|
Simulation of ultrasonic wave in the composite aircraft structures
Cimrhanzl, Jan ; Koštial, Rostislav (referee) ; Šplíchal, Jan (advisor)
V této diplomové práci jsou popsané SHM metody používané v letectví a dále jsou udělány MKP simulace šíření ultrazvoukových vln v celokompozitním tenkostěnném materiálu používaném u leteckých konstrukcí. Pro simulaci byla zvolena SHM metoda nazývaná pitch-catch. Simulace byla provedena na dvou různých kompozitových materiálech a každý z nich byl testován třemí různými konfiguracemi s trhlinou a jednou konfigurací bez trhliny. Jako prepocessor byl použit MSC.Patran a jako post processory byli použity MSC.Nastran a MSC.Dytran, jejichž výsledky byli na závěr porovnány. Simulace prokázali, že rychlost šíření a amplituda vln šířících se v simulovaném panelu je trhlinami ovlivněna. Při konfiguracích s trhlinami rychlost šíření i amplituda vln byli menší, než v případě bez trhliny. Jako vhodnější post processor při MKP simulacích se ukázal MSC.Nastran, jehož výsledky byli přesnější a zárověň bylo i snažší správně odečítat hodnoty dat z grafů pro podrobnější pozorování šíření vln.
|
|
|
Consistency of mathematical and experimental model of the autoparametric system
Fischer, Cyril ; Náprstek, Jiří
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy sphere in a spherical surface. It shows that the danger posed by the potentially unstable self-parametric nature of the mathematical system is not too great in the case of realistic configurations, and that the values of the parameters describing the realistic structures remain within intervals corresponding to the stable behaviour of the absorber.
|
|
|
Adaptation of methods for cyclo-stationary processes for noisy structural health data
Fischer, Cyril ; Bayer, Jan ; Náprstek, Jiří ; Urushadze, Shota
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. Conversely, the desired attributes under scrutiny are periodic in nature. Thus, methodologies designed to identify cyclo-stationary properties within noisy data can be adapted for such scenarios, assuming an adequate length of the recorded data.
|
|
| |
|
|
Dynamics of a cantilever beam with piezoelectric sensor: Experimental study
Kolman, Radek ; Kylar, Jaromír ; Kotek, Vojtěch ; Cimrman, Robert ; Musil, Ladislav
Online and real-time sensing and monitoring of the health state of complex structures, such as air-craft and critical parts of power stations, is an essential part of the research in dynamics. Several types of sensors are used for sensing dynamic responses and monitoring response changes during the operation of critical parts of complex systems. The piezoelectric (PZ) materials belong to one group of electroactive materials, which transform mechanical deformation into an electrical response. For example, PZ ceramics or PVDF foils are employed for online sensing of the time history of mechanical deformation. Experimentally obtained response of a cantilever beam structure with a glued PZ sensor is the case of interest in this contribution. During the transient problem of the beam loaded by suddenly interrupted load due to the weight of a mass at the end of the beam, the time history of normal velocity at a point on the beam surface has been measured by a laser vibrometer and parallely, the output voltage on the PZ sensor has been measured by an electric device. The experimental data in the case of the first eigen-frequency is in good agreement with the value given by the formulae from the theoretical modeling of free vibration of a linear beam.
|
|
|
V5: Report on further collaboration with R6 Panel
Joch, Jaroslav ; Štefan, Jan
This report presents obligatory output V5 of project TAČR TK01030108: Innovative methods for nuclear plant safety evaluation based on SHM technologies and related procedures - NEMENUS (NEw MEthods for NUclear Safety). The report presents program of further collaboration with R6 Panel and other foreign partners established during the project.
|
|
|
V7: Summary report NEMENUS for SÚJB
Štefan, Jan ; Joch, Jaroslav ; Převorovský, Zdeněk ; Gabriel, Dušan ; Krofta, Josef ; Chlada, Milan ; Kober, Jan ; Masák, Jan ; Kunz, J. ; Ashhab, B.
This is the final report of project TAČR TK01030108: Innovative methods for nuclear plant safety evaluation based on SHM technologies and related procedures - NEMENUS (NEw MEthods for NUclear Safety). In this report, the most important project results and outputs are presented, as well as a summary of its contributions with respect to long-term technological horizons.
|
|
|
V6: Report on functional sample NEMENUS
Štefan, Jan ; Joch, Jaroslav ; Převorovský, Zdeněk ; Gabriel, Dušan ; Krofta, Josef ; Chlada, Milan ; Kober, Jan ; Masák, Jan ; Materna, A. ; Kovářík, O. ; Čech, J.
This research report is an integral part of mandatory output V6: FUNCTIONAL SPECIMEN of project TAČR TK01030108: Innovative methods for nuclear plant safety evaluation based on SHM technologies and related procedures - NEMENUS (NEw MEthods for NUclear Safety). The report presents full technical description of the elaborated representative functional specimen (the representative SHM model) and the description of a four-year experimental program.
|
|
|
Theoretical analysis of selected trajectories inscribed by a ball freely rolling in a spherical cavity
Náprstek, Jiří ; Fischer, Cyril
Indirect monitoring of structures is significantly complicated when an artificial vibration absorber has to be taken into account. Knowledge of the absorber’s behaviour is necessary in order to correctly distinguish the response types obtained during an drive-by measurement. In this work, the mathematical model of the ball-type vibration absorber is used, which is based on the Lagrangian formalism. Three first integrals are identified when no external excitation nor damping is assumed. The paper illustrates the power of this approach, which enables a detailed analysis of free movement of the ball in the spherical cavity. Properties of several particular trajectories depending on initial conditions are presented.
|
guest ::
