|
|
Crane Stroke Mechanism 8 t
Marek, Vlastimil ; Hloska, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis contents design of overhead crane stroke mechanism with working load 8 000 kg. Thesis contains research of currently produced crane trolleys, detailed calculation of stroke mechanism and proposal for purchased parts such as electromotor, brake and gearbox. Thesis is also supplemented by assembly drawing of stroke mechanism and welded assembly drawing of rope drum.
|
|
|
Stroke mechanism of crane trolley
Julínek, Petr ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
This bachelor´s thesis deals with proposal basic parameters of stroke mechanism of crane trolley for the weights 16 000 kg. At work is proposed to rope mean, rope drum dimensions, dimensions of pulleys, motor, gearbox, bearing deposit. Individual chapters provide justification for choice of devices.
|
|
|
Stroke mechanism of crane trolley
Galas, Radovan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
Bachelor's thesis deals with design of stroke mechanism of crane trolley loads for the weights which do not exceed 5 000 kg. This thesis divided into written and practical sections. Written part deals with the calculation of the principal dimensions of lifting and stress control of cable reel. In this work there are also given reasons for choosing certain key parts of the lifting mechanism, such as: electric motor, gearbox, etc. Prior to the calculations in each chapter there is usually located a short introduction of the topic. The practical part contains a drawing of the complete lifting mechanism, cable reel assembly and two production drawings.
|
|
|
Stroke mechanism of crane trolley
Julínek, Petr ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis deals with proposal basic parameters of stroke mechanism of crane trolley for the weights 16 000 kg. At work is proposed to rope mean, rope drum dimensions, dimensions of pulleys, motor, gearbox, bearing deposit. Individual chapters provide justification for choice of devices.
|
|
|
Straddle Carrier
Wojnar, Tomasz ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor’s thesis focuses on a design of loadbearing frame and raising mechanism of straddle carrier, which is used in container terminals. It’s made for transport of container on the surface of terminal. It’s about designer calculation of individual parts of crane frames, applicability of designed parts is checked by strength calculation. Raising mechanism is designed with drive of stroke. Outputs of this bachelor’s thesis are drawings.
|
|
|
Crane Stroke Mechanism 25 t
Strommer, Bohumír ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The purpose of this bachelor thesis is the proposal of stroke mechanism of travelling crab with lifting capacity 25,000 kg. The proposal consists in calculations of the main dimensions of individual parts of the stroke mechanism, as the pulleys diameters, overall dimensions of the rope drum, rope diameter, then the choice of gearbox, brake, coupling and electric motor. There is a strength calculation of the rope drum and the bearing life calculation. Thesis includes assembly drawing of travelling crab and drawing of rope drum weldment.
|
|
|
Stroke mechanism of crane trolley
Dokoupil, Jan ; Pokorný, Přemysl (referee) ; Hloska, Jiří (advisor)
The Bachelor thesis solves design of a stroke mechanism with rated capacity of 20000 kg. The calculations are determined by parameters of hoist, rope drum sizes, its bearing and stress analysis. Drive mechanism is designed and project documentation of mechanism assembly, welding rope drum assembly and the production drawing of head of rope drum are worked.
|
|
|
Stroke mechanism of crane trolley
Juda, Lukáš ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
Bachelor thesis deals with design of stroke mechanism of crane trolley with load capacity 16 000 kg. The thesis contains calculations of basic parameters of stroke (rope diameter, diameters of pulleys, overall dimensions of rope drum, calculation of electric motor, parallel gearbox, frequency inverter, gear couplings and brake of hoist mechanism), strength check of rope drum and calculation of drum bearing. Part of the thesis is assembly drawing especially assembly drawing of complete hoist mechanism and weldment drawing of rope drum.
|
|
|
Design of lifting gear of bridge crane 50 tonne
Koutný, Pavel ; Pokorný, Přemysl (referee) ; Kubín, Martin (advisor)
The submitted bachelor thesis deals with the design of a lifting gear for a bridge crane on 50 tonnes. The first part includes a design and a calculation of a rope, rope pulleys, design of a block and a cable reel. In the second part there is chosen an electromotor, a transmission, a brake, a clutch and bearings. Relevant strength calculations of a cable reel and a cable reel bolt are made for the capacity of 50 tonnes. The output of this bachelor thesis is a drawing documentation of a cable reel and a manufacturing drawing of reel components.
|
|
|
Stroke mechanism of crane trolley
Julínek, Petr ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis deals with proposal basic parameters of stroke mechanism of crane trolley for the weights 16 000 kg. At work is proposed to rope mean, rope drum dimensions, dimensions of pulleys, motor, gearbox, bearing deposit. Individual chapters provide justification for choice of devices.
|
guest ::
