|
|
Concept of sidecarcross motorcycles
Tobiáš, Martin ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
Sidecarcross is a successful and an attractive motorsport discipline in Czech republic, both for spectators and for competitors. In Czech republic, this sport is purely amateur, inexpensive off-road motocross circuits are in many places. The goal of the thesis is to introduce contemporary sidecarcross machinery to the readers, apprise them of attempts to further develop this racing industry and enable them to be knowledgeable spectators at the races. The thesis can also be useful to novice racers, which usually use refurbished used machinery from abroad.
|
|
|
Front Axle of a High-performance Sports Car
Hrudík, Jan ; Blaťák, Ondřej (referee) ; Drápal, Lubomír (advisor)
Tato diplomová práce byla psána při studentské zahraniční stáži, pod záštitou Evropské Unie – program „ERASMUS Student Mobility for Placement“. Stáž byla absolvována mezi prosincem 2010 a květnem 2011 ve společnosti a.d.Tramontana, mající sídlo v Palau de Santa Eulália, Španělsko. Pro kompletní návrh podvozku a odpružení jakéhokoli vozidla je nezbytná znalost mnoha technických disciplín. Tato diplomová práce se zabývá dvěma z nich – odpružení a řízení. Nejprve je rozebrána teorie, na kterou se může navázat v praktické části práce. Velká pozornost byla věnována srozumitelnosti textu a názornosti obrázků, bez zbytečných detailů, avšak bez vynechání důležitého. Tuto práci je tedy možné užít jako prvního kroku před návrhem podvozku. V další části je popsáno, jak byla probraná teorie využita při návrhu řízení u skutečného vozu, přičemž největší pozornost je věnována Ackermannově teorii řízení a geometrii zabraňující samořízení při propružení. V závěrečných částech je pozornost věnována ukázce některých z každodenních činností v malosériové výrobě automobilů – jde o zjištění maximálně možného pohybu kola při propružení a proces výroby příčných trojúhelníkových ramen včetně návrhu jejich připevnění k šasi.
|
|
|
Conception of ATV (all-terrain vehicles)
Dosedla, Milan ; Vančura, Jan (referee) ; Porteš, Petr (advisor)
This thesis is review article of the current design and construction setup of ATVs. In the individual chapters are analyzed function of structural units and their advantages and disadvantages for the application. Much attention is paid to the design and construction of the brakes and axles. Work based on the analysis 30 models of ATVs from different manufacturers. This thesis reports the specifications of selected models. In conclusion we discuss the appropriateness of design solutions for different types of ATVs such as utility or sport models.
|
|
| |
|
|
Formula Student Steering System Design
Pospíšil, Jaromír ; Blaťák, Ondřej (referee) ; Ramík, Pavel (advisor)
This thesis describes the steering system parts, the most common used parts and rates their advantages and disadvantages. These findings are then transferred into the Formula Student steering system design. The thesis also presents procedures leading to determine load of steering system, which is taken into account in steering system design. The final version of steering system is analyzed of stiffness.
|
|
| |
|
|
Sport downhill cart for the disabled
Šantavý, Ivo ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor´s thesis deals with the development of a "Sport downhill cart for the disabled" prototype. This project was jointly inspired by Human Power Vehicles and by components from various industry sectors. After a description of the above mentioned vehicles, the work describes the successive development of the cart, including construction solution, and a component and frame modeling in the CAD system Autodesk Inventor. The total calculation of the entire "Sport downhill cart for the disabled" is presented in the conclusion.
|
|
|
Non-traditional Motorcycle Conception
Brezanský, Vít ; Drápal, Lubomír (referee) ; Beran, Martin (advisor)
The goal of the thesis is to introduce some interesting and non-traditional conceptions of motorcycles from the present and also from previous years. In every part reasons are described that led producers of these motorcycles to design conceptions that might be perceived as almost absurd. However not every one of them was forgotten and some succeeded on the roads and race tracks, others will be perhaps successful in a few years. Every part also includes a description of the construction and function followed by the assessment of individual solutions according to their justification, realization, number of pieces sold or race results.
|
|
|
T1 Category Race Car Design
Šťáva, Martin ; Vančura, Jan (referee) ; Hejtmánek, Petr (advisor)
This diploma thesis deal with conceptual design of racing car of T1 category. Car consist of tubular frame, front and rear double wishbone suspension, braking system and conceptual design of the fairing. These are the basic of this thesis. For the completeness of the design, the location of the crew and the placement of the components inside the frame are also proposed. Adams Car 2016, Autodesk Inventor 2016, Ansys Workbench 18.1 were used for designing, testing, simulation and calculations. Designed T1 category race car meets International Automobile Federation (FIA) technical standards and safety regulatons.
|
|
| |
guest ::
