|
|
Impact of Communication Parameters on Energy Consumption of Zigbee Devices
Popelka, Jan ; Červenka, Vladimír (referee) ; Šimek, Milan (advisor)
This thesis deals with the energy research and design a simple wireless sensor networks. The data modules with ZigBee wireless communication technology. The main feature of wireless sensor networks is the minimal energy devices at low cost and maximum data reliability. Furthermore, the work describes firmware for communicating nodes with the ability to change parameters of data transmission and thus affect the energy consumption node. Calculations of energy consumption, compared with measured results and discharge characteristics of the battery packs are included in the final chapters of this work.
|
|
|
Analysis of Wi-Fi traffic
Bakó, Zdeněk ; Pospíšil, Ondřej (referee) ; Pospíšil, Jan (advisor)
This bachelor thesis deals with the capture and analysis of wireless traffic of Wi-Fi networks. The aim of this work is to describe the possibilities of capturing and analyzing the operation of Wi-Fi networks. It describes the IEEE 802.11 standard, its features such as architecture and current standards. A selection of a suitable router is performed on which traffic capture and analysis is performed. Some open-source firmware for routers is compared and the most suitable one is selected. Tools for capturing and analyzing Wi-Fi network traffic are compared and described. The differences between the promiscuous and monitoring capture mode and their possibilities of use are described. Finally, there are described options for analyzing captured 802.11 frames.
|
|
|
Optical network design
Polaček, Adam ; Tomašov, Adrián (referee) ; Horváth, Tomáš (advisor)
This bachelor thesis deals with the design of a technological optical network for the area of Hradec Králové, for the company ČEZD Distribuce. The theoretical part of the thesis describes the current network design and discusses network protocols. The practical part of the thesis describes the passive part and the logical part of the network. An important part of the thesis, is the fiber scheme and configuration design for router and switch. In the last part of the thesis, simulation in GNS-3 program is shown.
|
|
|
Design of CISCO network analysis by VePAL TX300 Analyzer
Ťápal, Tomáš ; Vychodil, Petr (referee) ; Škorpil, Vladislav (advisor)
This bachelor´s work consists of describing the network Cisco, possibilities of network analysis with analyzer VePAL TX300 and Sunset MTT, creation of manual for the analyzer VePAL TX300 and draft three laboratory exercises. The first exercise analyzes transmission parameters of the network Cisco. The second exercise compares parameters of two different types of routers. The third exercise analysis VoIP and IPTV services, especially qualitative parameters.
|
|
| |
|
|
Modelling of L2 Loop-Preventing Protocols
Hrnčiřík, Matej ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
This thesis informs about currently used technologies, which provide loop protection on data link layer of computer networks. It clarifies issues of Ethernet networks. Chosen protocols are then closely described. There are presented advantages and disadvantages of chosen protocols and they are compared to other technologies. Practical section describes the initial implementation of IS-IS in OMNeT++ environment, which serves as the basic building block of TRILL protocol. An important issue is to verify correctness of implementation.
|
|
| |
|
|
Advanced Utilization of Network Analyzers
Novák, Přemek ; Polívka, Michal (referee) ; Škorpil, Vladislav (advisor)
This bachelor´s thesis consists of description of the laboratory network Cisco and any of its components. Furthermore, the possibility of network analysis according to the standards RFC 2544 and EtherSAM and description of the measurement using analyzer Vepal TX300, Fluke NTS II and Sunlite E1 used in lab reports. In the first task, the characteristics of network elements are analyzing. In the second task, parameters of Cisco network are examined and the third task is focused on the E1 frame.
|
|
|
Application generating and verifying configurations of network devices
Korček, Juraj ; Tyrala, Radek (referee) ; Jeřábek, Jan (advisor)
The aim of this master's thesis is a design and implementation of a program for finding security and operational deficiencies of network devices and afterwards, resolving them by generating corrective configuration. Due to a lack of security and misconfiguration, there are a lot of devices exposed to the risk of a security incident. Therefore, the program compares settings with various standards, recommendations, and best practices and generates a report with findings. Afterwards, deficiencies can be eliminated by automatic resolution or manually if automatic resolving is not possible. The program uses regular expressions to find problem settings in previously exported configurations. Implementation is written in Python, and YAML markup language is used too. Another output of this thesis is a checklist, which can be used for the creation of future modules for support of other network device vendors and thus extend the program.
|
|
|
Laboratory Monitoring System
Bošeľa, Jaroslav ; Křepelka, Václav (referee) ; Škorpil, Vladislav (advisor)
This bachelor thesis deals with network monitoring solution for school laboratory network. Describes the laboratory network devices, their purpose and condition before applying configuration, it also contains a comparison of commercial supervision network systems and the choice of one that has been used. The essence of the thesis is focused onto SNMP protocol, its use in laboratory network monitoring. In the practical part of the thesis is created the system supervision configuration, which is applied into laboratory network and ensures the supervision and monitoring for whole laboratory network.
|
guest ::
