|
|
Detection of slow-rate DDoS attacks
Sikora, Marek ; Frolka, Jakub (referee) ; Blažek, Petr (advisor)
This diploma thesis is focused on the detection and protection against Slow DoS and DDoS attacks using computer network traffic analysis. The reader is introduced to the basic issues of this specific category of sophisticated attacks, and the characteristics of several specific attacks are clarified. There is also a set of methods for detecting and protecting against these attacks. The proposed methods are used to implement custom intrusion prevention system that is deployed on the border filtering server of computer network in order to protect Web servers against attacks from the Internet. Then created system is tested in the laboratory network. Presented results of the testing show that the system is able to detect attacks Slow GET, Slow POST, Slow Read and Apache Range Header and then protect Web servers from affecting provided services.
|
|
|
Switching of modern LED light sources
Dobrovolný, Jakub ; Fencl, Jiří (referee) ; Dostál, Lukáš (advisor)
The protection of the electrical device is provided to prevent the electric shocks, protect the equipment and prevent a damage caused by electrical faults. The current protection for a small fault currents need not always have an effect. At the serious faults the current protections never work. The new type of device to protect against damage caused by electrical failure is an arc protection. The arc protection switches off safely all types of fault arc in different sizes. This work verifies its correct functionality in the case of electric circuit with deceptive signals from LED light sources. The output of the work is the measurement of the switching current of the LED light sources. The work is remarkable thanks the number of measurement for individual angles of switching on which have statistical meaning.
|
|
|
Proposal of electrical equipment for soaking and drying cores for making castings
Čermák, Jiří ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
This diploma thesis deals with proposal of electrical equipment for soaking and drying cores for making castings at foundry in a Great Britain. It brings look at system of technical norms ČSN and it compares it with british system of technical norms British standards. The second part of this thesis contains detailed proposal of this equipment, including specification of control system, specification of power supply cables and control cables and particular technological units. The whole project documentation is enclosed as an inseparable attachment of this diploma thesis.
|
|
|
Design of class AB stereo audio power amplifier
Podr, Michal ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This thesis describes the design of a complete amplifier operating in class AB. It contain two power amplifiers with working in the bridge mode correction amplifier with volume control, bass, treble, and also with the choice of loudness. Preamplifier with three different inputs and the choice between stereo and mono modes.
|
|
|
Research and development of progressive protective equipments for horizontal construction using waste materials
Hodná, Jana ; Bydžovský, Jiří (referee) ; Ďurica,, Tibor (referee) ; Dohnálek,, Pavel (referee) ; Drochytka, Rostislav (advisor)
Large amount of different types of industrial wastes are still not re-use as secondary raw materials in industry. The work deals with finding a new way how to use secondary raw materials, especially the possibilities of using recycled glass from different sources as a fillers in the polymer protective materials development for horizontal structures. The main task of this work is to develop a material with the desired physic - mechanical properties and further verifying the influence of particle shape on their chemical resistance. Result of this work will find advanced protective materials using secondary raw materials as alternatives to be in terms of economic and ecological efficiency replacement for conventional products.
|
|
|
Line protection against overload and short circuit
Konšel, Ladislav ; Vaněk, Jaromír (referee) ; Valenta, Jiří (advisor)
This work includes a theoretical treatise on the operation of electrical wiring for the overload and short circuit. This is mainly on thermal effects of over current and their influence on the properties of conductors and insulation. Work Includes links to determine the load current, depending on the properties of leadership and its surroundings. It also deals with the protection of conductors against overload and short circuit. The work includes measurements process of warming wires. Practical project of proposal circuit is created using SICHR. The project includes proposals of conductor’s sizes and safety components for both residential building and individual flats.
|
|
|
Materials for Production of Chords for Musical Instruments
Krhut, Štěpán ; Němec, Karel (referee) ; Molliková, Eva (advisor)
My bachelor’s work is about materials used for making the musical strings and its protection against its wear off. The introduction deals with evolution and history of the musical strings and the next chapters explain physical basics of the vibrations and how to make the musical string. There are also highlighted and many times mentioned guitar strings in my work due to the string manufacturers are made to develop and implement various high level demands into the strings because of the many various guitar playing techniques.
|
|
|
Classification of asynchronous motors
Čala, Václav ; Dušek, Jiří (referee) ; Singule, Vladislav (advisor)
This diploma thesis deals with a creation of a “Classification Document” of asynchronous motors with a short-circuit armature with axial heights of 355, 400, 450, 500, and 560 mm. Furthermore, it is concerned with a creation of an integral design documentation for the production and assembly of these motors at the company TES VSETÍN, s.r.o. By writing this diploma thesis I would like to achieve a simplification of communication with the customers during the processing of asynchronous motors orders and to speed up the processing of asynchronous motors orders not only in the design department but also the complete technologic preparation of the production which will surely be provided by this integrated documentation.
|
|
|
Electrical installations in apartment building
Novotný, Jan ; Formánek, Marian (referee) ; Doležalová, Jana (advisor)
This bachelor's thesis deals with electrical wiring in apartment building. The aim is to describe the types of distribution networks, implementation possibilities of service lines, describe the individual parts of the wiring in the building and the principles of their implementation. Further describe basic electrical materials and to explain the design of artificial lighting. In the practical part the information applied to a particular apartment building, together with the calculation of the estimated annual energy consumption of flats. For the apartment building project is created in the form of engineering report and drawings.
|
|
|
Topology for next generation access networks
Kovář, Adam ; Sládok, Ondřej (referee) ; Grenar, David (advisor)
This thesis consists of basic requirements, application of optical fibres and final simulation of this network in specific location. This template shows ideal construction of optical fibre network for this specific location and also displays expected price of building this kind of network. In this thesis will be described this location and its problematic parts which can have critical impact on building of this network. As a part of design of this network we chose optical fibre and technology for protection of optical fibres. All of these items are collected and we can see approximate price. This thesis shows how the customer will be connected to network and also to this thesis is attached the map which shows exact position of the network. Simulation will prove networks stability and shows delay which can occur during using basic and expected applications on network.
|
guest ::
