|
|
Reduction of NOx contained in flue gas
Janík, Prokop ; Jecha, David (referee) ; Jedlička, Filip (advisor)
Research in the field of NOX abatement has grown significantly in the past two decades. The general trend has been to develop new catalysts with complex materials in order to meet the stringent environmental regulations. The master’s thesis deals with the cleaning flue gases through a filter element which is from porous ceramics. There is catalyst implemented for NOx reduction throug the method of selective catalytic reduction in the filter element. There is also description of experimental unit for flue gas cleaning. Part of the thesis is creation of prediction model which allows to predict efficiency reduction in the filtration device operating conditions with some accuracy.
|
|
|
Emissions from biomass combustion
Ptáček, Pavel ; Lisá, Hana (referee) ; Baláš, Marek (advisor)
Bachelor thesis deals with production of gaseous emissions from biomass combustion. It describes how emissions arise and how they affect human health and environment. In experimental part of the thesis emissions were measured and compared for different types of fuel in two combustion devices. Emission classes of combustion devices were also determined.
|
|
| |
|
|
The Effective and Ecological Burning of Biomass
Špiláček, Michal ; Kolat, Pavel (referee) ; Masaryk, Michal (referee) ; Skála, Zdeněk (advisor)
This work deals with the creation of a numerical model of a biomass combusting chamber on a grate. The research part of this work describes the basic properties of biomass important for its combustion and the biomass combustion process itself. For this process which it is necessary to know the dynamics of the chemical reactions and the overall mechanism of a grate combustion of fuels. It also describes the production of harmful emissions that can be generated by combustion of biomass and the emphasis is mainly on the production of nitrogen oxides. In the next part is described the combustion device itself and the basic mathematical model which incorporates the mechanisms of heat transfer, flow of fluids and transport of chemical species. The basic mathematical model is then extended to a complete mathematical model by determining the initial and boundary conditions. Subsequently, the results of the computer simulation of the mathematical model are presented and commented. The main focus are the emissions of nitrogen oxides and hydrocarbons. These results are used to design an improvement of the geometry of the combustion chamber.
|
|
|
Methods for suppressing NOx formation
Pořízek, Vít ; Hájek, Zdeněk (referee) ; Bělohradský, Petr (advisor)
The subject of this bachelor thesis are emissions of nitrogen oxides. The work deals with the suppressing their formation and with the possibilities of their elimination directly from the flue gas. The first part of the work analyses NOx emission limits for all stationary sources of pollution as well as the current effective legislation regarding emission limits of both European Union and the Czech Republic. Further part focused on nitrogen oxides themselves, their characteristics, impact on environment and last but not least on their formation mechanisms. Finally NOx reduction techniques are analysed and described, both primary and secondary.
|
|
|
Environmental aspects of steam-gas power station Červený Mlýn
Šilar, Martin ; Kulichová, Lucie (referee) ; Matoušek, Antonín (advisor)
The master’s thesis deals with the environmental aspects of combined heat and power station Červený Mlýn (Red Mill). The introductory part of the thesis focuses on the current production technology and the electricity balance of the power station. The heat and power station (also called combined cycle heat and power plant) is scrutinized in terms of emissions sources, focusing on pollutant emissions to air in the following chapter. In this part of the thesis the quantities of the released emissions, namely solid particulate matter (TZL), sulfur dioxide (SO2), carbon dioxide (CO2) are also calculated. The calculation is worked out according to the valid Czech legislation. Further on, the current production technology of the power station is compared with the best available technologies according to the valid directive 2008/1/EC of the European Parliament and of the Council concerning integrated pollution prevention and control. The last chapter presents the innovative technologies which could possibly be installed to reduce pollution emissions (especially nitrogen oxides - NOx) to air at the heat and power station Červený Mlýn.
|
|
|
The influence of the combustion air temperature on parameters of the combustion process
Šimeček, Radek ; Hudák, Igor (referee) ; Skryja, Pavel (advisor)
Tato diplomová práce se zabývá předehřevem spalovacího vzduchu a jeho vlivem na parametry spalovacího procesu. V teoretické části je zpracován přehled nejčastějších znečišťujících látek z průmyslového spalování. Je popsána aktuálně platná relevantní legislativa v Evropské unii a jsou porovnány její implementace do národní legislativy v České republice a v Německu. Dále je provedena klasifikace hořáků z hlediska různých kritérií a rešerše předchozí práce v oblasti předehřevu spalovacího vzduchu. Na zkušebně hořáků byla provedena experimentální studie dvou různých hořáků na zemní plyn při konstantním tepelném příkonu 750 kW se spalovacím vzduchem předehřátým až na 250 °C. Výsledky odhalily pozitivní vliv předehřevu na účinnost spalování. Množství emisí NOx a CO naopak rostlo s teplotou spalovacího vzduchu.
|
|
|
Reduction of nitrogen oxides from the flue gas stream on catalysts under non-standard conditions
Minář, Marek ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The objective of the presented diploma thesis is reduction of nitrogen oxides from the flue gas stream on catalyst under non-standart conditions. Emphasis is places on the description of selected pollutants in flue gas (especially nitrogen oxides), legislative requirements for air protection and technologies for removal of nitrogen oxides, expecially methods of selective catalytic and non-catalytic reduction. The practical part is devoted to the reduction of nitrogen oxides by selective catalytic reduction on a pilot plant INTEQ II in the laboratory NETME Center. The subject of interest is the determination of the NOx reduction efficiency depend on the temperature for selected catalyst. The end of the practical part pursues with comparison of measurement results and their evaluation.
|
|
|
Technologies for NOx Cut-down in Exhaust Gases
Drábik, Michal ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
This bachelor thesis deals with the issue of reducing nitrogen oxides emissions in exhaust gases and explains the principles of their reduction. The main aim of the thesis is to analyse and describe systems that are designed to reduce their amount. The following chapter provides examples of solutions for these systems for specific drive units. At the end of the thesis, there is a reflection on possible future development in this sphere.
|
|
|
Current trends of reduction NOx in the context with the prepared legislation
Růžička, Pavel ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
This bachelor's thesis deals with processes of generating and methods of abating nitrogen oxides contained in flue gases in the context of Czech and European legistation. It compares the new enviromental act with its predecessor and scetches the pull of the new emission limits on stationary sources of air pollution. With particular focus on NO and NO2, the summary of NOx compounds hands a brief review of every individual one, which amongst other matters includes their impact on public and enviromental health. In the next part the paper aims at primary and secondary measures of NOx reduction together with factors influencing their utilization. Last chapter inquires into methods of selective catalytic and non-catalytic reduction and means of thier engagement in industry.
|
guest ::
