|
|
Temperature Monitoring
Kotačka, Aleš ; Winter, Jan (referee) ; Kubek, Ján (advisor)
This master's thesis deals use FITkit for longtime temperature monitoring without necessity connection on PC. Describe possibilities connection different heat-sensitive elements to FITkit inclusive physical realization. Further this thesis deals with measuring of temperature, displaying temperature and saving to memory, blocks-partitioning of memory. Is defined communication protocol between FITkit and PC for bulk downloading of data. So are solving problems with saving measure data to text files and next processing in table processors.
|
|
|
Firmware for Multi-Unit Wireless Sports Timekeeping Device
Gál, David ; Šimek, Václav (referee) ; Strnadel, Josef (advisor)
This paper describes the design and subsequent implementation of software for multi-unit wireless sports timekeeping device. Used hardware is based on a different thesis and is composed of a control, the primary unit, and end, secondary, units. Both types are equipped with 16-bit PIC24F microcontrollers and wireless communication is catered by RF modules broadcasting in the 868MHz band. The design is aimed primarily at wireless use of secondary units to measure time and to eliminate measurement errors associated with wireless transmission. It also deals with reducing the consumption of units and the use SD cards to store the measured times. Implementation is done in C.
|
|
| |
|
|
RF power meter
Hlaváč, Štěpán ; Jedlička,, Petr (referee) ; Drexler, Petr (advisor)
This master’s thesis describes various principles of measurement of electromagnetic waves in a free space and on a line. Used sensors and their real parameters are given for every method. The analysis of protections of high-frequency inputs of measuring instruments is done here and the most suitable method and protections of input for realization are chosen. The analysis of design of secondary protection of high-frequency input is done in this project. The protection of input is realized and measured. The suitable method of measurement is chosen as well as the sensor for measurement of power. The block diagram and circuit diagram of the meter of power are designed. According to designed conception the measuring instrument for measurement of power is realized and its single qualities are measured during the realization. In the final part its precision is measured and the evaluation of results is done.
|
|
|
Design of Flow, Temperature and Pressure Measuring System
Macíček, Ondřej ; Čížek, Martin (referee) ; Sekora, Jiří (advisor)
This master’s thesis contains complete design of the complex measuring system for temperature, pressure and flow. Objects of measuring are pressure in rabbit’s heart ventricle, flow of the saline through the heart and the temperatures of physiological solution. Work is interested in programming of microcontroller and program for LabVIEW environment, which is used to view and export relevant data related to measuring. Text also contains technical documentation of functional sample of measuring system.
|
|
|
DDS Based High-frequency circuit analyzer
Priškin, Jiří ; Brno), Tomáš Mádr (DCOM (referee) ; Šebesta, Jiří (advisor)
At first this thesis is dealing with the basic principles of network analyzers and afterwards goes to propose conception of a polyscope, as a special type of the scalar network analyzer, designed for magnitude frequency response measurement of two-port devices. As a result of this part of the thesis is the polyscope's block circuit diagram and also selection of key integrated circuits for sweep generator, logarithmic detector and control circuits. As the following part of the thesis is a design of the all basic analyzer's circuits resulting in their schematics diagrams and printed circuit boards, do assembly of all modules and mechanical construction of the instrument and look of the front panel. Some of the tasks is implementation of the firmware and personal computer application able to download measured data from the circuit analyzer via USB and generate chart in Microsoft Office Excel book.
|
|
|
Design of evaluation network for in-vehicle networking communication chips
Kupčík, Ondřej ; Kovář, Jan (referee) ; Kolka, Zdeněk (advisor)
Cílem této diplomové práce bylo navrhnout moduly určené k demonstraci a testování některých obvodů, používaných v automobilové technice. Jedná se o LIN transceiver NCV7420 a osmivýstupový výkonový budič AMIS-39101. Návrh spočíval ve vybrání a popisu parametrů vhodných podpůrných obvodů, vytvoření celkového schématu a navržení desky plošných spojů tohoto modulu s ohledem na kompaktní rozměry a předpokládané testy. Dalším krokem byla tvorba firmware řídicího mikrokontroléru (C8051F344), jež zajišťuje LIN komunikaci, řízení budiče a základní monitorovací funkce. Poslední část popisuje software pro hostitelský PC umožňující komfortní řízení sítě složené z těchto modulů. Pro úplnost byl tento projekt doplněn o přehled vlastností sběrnice LIN a metodiky testování LIN transceiveru z hlediska funkčních parametrů i některých EMC měření. V příloha obsahuje kompletní schéma modulu, výkresy desek plošných spojů, seznam řídicích příkazů a fotografie modulu.
|
|
|
External pacemaker
Lank, Petr ; Rampl, Ivan (referee) ; Chmelař, Milan (advisor)
This master´s thesis deals with the problem of heart stimulation by using external pacemaker. Such external pacemaker is used for a short – time stimulation of patient to overcome the time before the implantation of such apparatus. The master´s thesis informs about the basic function of heart and possible heart disorders which are treated by pacemaker. Great deal of master´s thesis is devoted to the design of external pacemaker wiring. This section describes the possibilities of controlling the pacemaker, circuits for detection R-R interval, a design of output circuit eith regard to required of stimulation and pacemaker feeding. The program Pspice was used to check the functional appropriateness of designed circuits and it was successively simulated in a non - soldering field.
|
|
| |
|
|
VoIP- IP network voice communication
BERAN, Václav
The possibility for using the VoIP technology as an alternative solution for the te-lephone system is very attractive. The main reason is the widely expanded computer sites and also their higher effectiveness. The main goal of the work is to describe the VoIP technology and create the first publication in Czech republic which deals with this theme in details. First of all I concentrate on the explanation of the basic words, conceptions and principles necessary to fully understand the whole field. The main scope of the work is VoIP technology which is described in third chapter. There are described also the methods of voice coding, signalling protocols (SIP, H.323, MGCP, IAX) and issues related with QoS. The work also covers the Skype program with descriptions of it's principles, installation and control.
|
guest ::
