|
|
Using ERT and GPR in polygonal patterned ground analysis
Široký, Jakub ; Křížek, Marek (advisor) ; Hartvich, Filip (referee)
Polygonal cryogenic structures cannot be investigated with conventional methods as they could be harmed during measurement. A real3D GPR and ERT non-destructive surveys were used to examine and prove applicability for topsoil covered ice-wedge pseudomorphs and coarse-grained sorted polygons (patterned ground). A list of processing tools and algorithm suitable for such environments was created and tested. The benefits of 3D measurements are illustrated on horizontal slices and pseudo3D visualisation of 3D Cube. Basic morphometry characteristics of both forms were collected. Abilities of geophysical imaging for advanced shape characterisations are discussed, too. The low-frequency measurements gave better results at both sites. Pseudomorphs, 2 wide and up to 6,5 long, were found penetrating depth bigger than 3,5 . Sorted polygons, 2,5 wide in diameter, were depicted locked by stony ring of width around 1 . Sorting depth extends up to 0,54 depth for sure, perhaps more.
|
|
|
Survey and Diagnostics of Building Construction
Resl, Jaroslav ; Cikrle, Petr (referee) ; Anton, Ondřej (advisor)
The thesis is focused on the overview of the diagnostic methods for engineering surveys reinforced concrete constructions. The practical part explains engineering surveys of industrial building, evaluation of concrete strength on existing building and results from search reinforcements on individual elements. Next part is focused on load testing precast floor slab removed from construction and evaluation load capacity. The last part include structural design of elected parts (precast floor slab and beam).
|
|
|
Survey and evaluation of building constructions
Balas, Ondřej ; Komárková, Tereza (referee) ; Heřmánková, Věra (advisor)
This thesis is focused on the description and evaluation of the status of existing reinforced concrete and of the prefabricated overhanging structures. The first part describes the solution overhanging structures, followed by a description of selected diagnostic methods for determining the properties of concrete in the structure and to determine the degree and extent concrete reinforcement. The main objective is to determine the status of overhanging structures on the case static analysis and critical points of the support structure for the purpose of the planned revitalization of the object.
|
|
|
Wideband antenna for the frequency range from 5 GHz to 10 GHz
Hebelka, Vladimír ; Oliva, Lukáš (referee) ; Řezníček, Zdeněk (advisor)
The design and manufacturing of a wideband bow-tie antennas for the frequency range from 5GHz to 10GHz are described on this thesis. In the first part of this thesis is decsribe a several type of bow-tie antennas. Next part provides the design of bow-tie antennas and optimalization in CST microwave studio software. At the end of the thesis are compare simulation results and measured results of bow-tie antennas.
|
|
|
Diagnostics of ceiling structures - possibilities of using GPR
Resl, Jaroslav ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The thesis is focused on the overview of the diagnostic methods for engineering surveys. The distribution of ceiling structures according to various parameters is described. The theoretical part then provides an analysis of diagnostic methods for the ceiling structures in more detail. It includes a description of the operating principles of GPR. The practical part explains the construction and technical survey of ceiling structures using ground penetrating radar as well as measuring on a physical model. Practical measurement is focused on the use and limitations of the radar.
|
|
|
Possibilities of using GPR in diagnostics of bridges
Moravská, Veronika ; Vítek, Lubomír (referee) ; Anton, Ondřej (advisor)
This bachelor thesis deals with the diagnostic survey of reinforced concrete bridges using GPR. In the first part of the GPR specified nomenclature, physical concepts. The next chapter deals with methods of diagnosis, which are used to locate reinforcement. The next section describes the basic types of bridges, bridge terminology and reinforcement of the main body. The practical part describes the diagnostic surveys of existing bridges.
|
|
|
Methods for the survey reinforced concrete bridges
Ehrenberger, Ondřej ; Anton, Ondřej (referee) ; Cikrle, Petr (advisor)
Policies and types of diagnostic examination of a bridge. The theoretical section contains review diagnostic methods for a steel concrete frameworks. In a practical section there is made a examination of a bridge object over a river Moravia and a suggestion of the examination according to the detected defects. In the experimental section we are discovering, with a help of georadar, a location of reinforcement of a monolithic wall and board.
|
|
|
Diagnostic methods for reinforced concrete bridges
Vaňková, Michaela ; Vítek, Lubomír (referee) ; Anton, Ondřej (advisor)
This bachelor thesis deals with the diagnostic survey of reinforced concrete bridges. In the introductory part is the bridge terminology, another part deals with methods of diagnosis,which can be applied to concrete bridges. Last chapter refers to the typical defects and disorders of reinforced concrete bridges. The practical part describes the technical survey of existing bridge and comparison methods determining the position of reinforcement - a radiometric method and using the GPR.
|
|
| |
|
| |
guest ::
