|
|
Low-energy building of boarding house in Chlumětín
Vtípil, Jan ; Blasinski, Petr (referee) ; Počinková, Marcela (advisor)
The master thesis deals with the design of environment friendly boarding house, which is located on a hill in a small village called Chlumětín. There are designed renewable energy sources, such as solar collectors or fotovoltaic panels. The first part deals with the design and layout of the boarding house. On the ground floor is solved, the design of the kitchen according to hygienic requirements, the design of the premises for guests with barrier-free toilets. In the attic are designed guest rooms including barrier-free room. The second part deals with the simplified design of building services. It includes rainwater management, mechanical ventilation with heat recovery, lighting, cooling and heating. The third part deals with the detailed design of heating in the building. It includes design of radiator power, pipe dimension, power of wood-gas boiler, storage tanks, pumps, etc.
|
|
|
Special education centre
Gilbert, David ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of my master's project is to design a new building of a Special education centre with nearly zero energy consumption. The project consists of three main parts. The building is designed with a green flat roof with a load-bearing part formed by prestressed ceiling panels. The load-bearing wall masonry consists of ceramic blocks with stone wool insulation panels with longitudinal fibres. The building is divided into two main parts connected by a connecting entrance hall. First department is used mainly for therapy rooms and the other department for the offices of special pedagogical staff. The building also contains photovoltaic panels, air-handling units with heat recovery and a rainwater storage reservoir with the possibility of using rainwater for flushing. The next part of the master's project deals with the assessment of the life cycle of the structure (LCA), where the subject of assessment are various types of floor structures.
|
|
| |
|
|
Construction technology project of the apartment building in Velká Bíteš
Sotolář, Václav ; Brandtner, Michal (referee) ; Venkrbec, Václav (advisor)
The subject of this final thesis is the construction technology project of an apartment building in Velká Bíteš. The thesis contains a technical reports, construction technology study, coordination situation, time schedule and financial plan of the building in the structure of individual construction object, time schedule of the main building, solution of transport routes, technological regulation for the ventilated facade, control and test plan of the ventilated facade. Furthermore, a design of the construction site equipment is prepared, including a technical report, Occupational Health and Safety on the construction site for the superstructure construction phase, budget for the superstructure construction phase and a comparison of variants of the ceiling structure. Finally, a comparison of lifting mechanisms, LEED certification and assessment of photovoltaic facades is processed.
|
|
|
Draft methodology for processing and evaluation of long-term measurements on PV Panel
Žák, Tomáš ; Šlezingr, Jan (referee) ; Macháček, Jan (advisor)
This bachelor thesis aims to analyse the physical theory behind the photovoltaic cells and propose extension measurements for a modernised on-line laboratory. The first part of this thesis describes the theory of the photovoltaic conversion of solar energy into electricity. The p-n junction is described in detail because of its importance for a thorough understanding of the subject. The temperature dependence of a photovoltaic panel, i.e. the negative impact of rising temperature on the output power, is also described here. The contributions of this thesis include a summary of the current situation and the system of state subsidies for the current year as well as a proposal for an extension of measurements in an on-line laboratory, which is to be modernised, at the Department of Power Engineering. Therefore, the thesis includes some specific proposals of graphic dependence, which have a significant information value, and a possible further extension of the laboratory with new measuring and measured elements, which would be helpful for deeper understanding of the subject. In particular, it would be useful for understanding which factors influence the output power of a photovoltaic panel, both significantly and less significantly, which is undoubtedly the most important point.
|
|
|
Renewable Energy Source
Fojtíková, Marcela ; Škvařil, Jan (referee) ; Fiedler, Jan (advisor)
This bachelor thesis is concerned with the usage of renewable power sources. It sheds light on the matter of solar energy, function of photovoltaic cells and photovoltaic panels. It presents us with a closer look on the photovoltaic power plant in Syrovice and essential technological equipment of such facility.
|
|
|
Energy active house
Drlík, Tomáš ; Hudec, Mojmír (referee) ; Sedlák, Jiří (advisor)
The aim of the thesis was to design an energy efficient system that uses a waste heat from the operation of distillery and helps to reach energetically active status (in conjunction with the newly designed photovoltaic panels, controlled ventilation with heat recovery and with proper design and material solution) to the newly created housing units. The need of heating is covered by using of waste heat and in the mode of economical (energy saving) operation of households, the photovoltaic panels on the surface produce more electricity than the households consume themselves.
|
|
|
Heating of hot water by systme base on photovoltaic panels
Zdvořilý, Vítek ; Hejčík, Jiří (referee) ; Fišer, Jan (advisor)
The aim of the Bachelor thesis is to compare specific types of regulation for the effective heating water with using photovoltaic panels for the standard household. The follow types of regulation was taken into account: the MPPT controller, switching of load, switching of pannels connection and PWM regulator. The second part of the thesis is focused on design of photovoltaic system for domestic hot water heating which is designed for climatic conditions in Polička near Svitavy.
|
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
|
| |
guest ::
