|
|
Nursery School
Koutná, Vendula ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Master’s thesis „Nursery School" is proceed in form of project document, including all requirement according to standards and regulations. New building is located on parcel number 439/50 in city Přerov. Detached building has three floors and is partly cellarage. It is brick construction system based on packs. The roofs are flat, and constructed as single shell. Te floors are connected by prefabricated concrete staircase and by elevator. The nursery school is designed as a four departments building, with capacity of 96 children.
|
|
|
Multifunctional building
Svoboda, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
This is a detached multifunctional building in the construction of commercial and residential buildings. The building is located in České Budějovice. Multifunctional building has five floors, one underground floor and a partial basement. The building is covered single-surface vegetation and double skin roof rack. On the first floor is a multifunctional building with reception vestibule, hall of which are accessible to all businesses and also the staircase space. The first floor is also a cafe, spatially separated from the multifunctional building. The café includes restrooms and stairs to get to the hinterland own cafe, where there is room for staff, toilet and are relevant warehouses drinks and other amenities. On the second floor there is a fitness center with all facilities and sanitary facilities. The gym also includes a reception and a health food store. In the third to fifth floor are residential units. A total of 5 apartments, where 2 and 3 flats are always identical. The building is based on foundation strips of plain concrete and masonry made of POROTHERM building system with a contact system of the company ISOVER. The project has been prepared complete documentation of new multifunctional building at the level of documentation for construction. Design of the building emphasizes the static and layout, fire safety, energy savings and safety in use. Drawing documentation was realized in ArchiCAD.
|
|
|
House with an establishment
Julínek, Dan ; Kalábová, Tereza (referee) ; Šuhajda, Karel (advisor)
The bachelor work contains design documents of a standalone family house with an establishment. This house is situated in the area of Brno-centre, region Brno in parcel no. 1428/1 in the land register of Kohoutovice. Built up area is 164,5 m2. The house is a twofloor,partial basement with an attic. On the ground floor of the living part of the house is designed entrance, vestibule, corridor, bathroom, WC, kitchen, pantry, cojoined dining room and living room, and staircase. In the operational part of the ground floor is designed entrance, waiting room, veterinary medicine, WC for the patients, WC for the working staff, conveniences, dressroom, and store room. In the attic there are situated two rooms, quest bedroom, master bedroom, bathroom, WC, dressroom, study, corridor, and loggia. In the basement there are situated workshop, laundry room, cleaning store room, corridor, and staircase. The building is based on foundation strips made from concrete C16/20, all peripheral frame structures in the basement are designed in BTB bricks, and the elevated frame sturcturesthe syare designes in system Porotherm. Staircase is made as monolithic construction with wood paneling. Roof is a gabled roof of the type „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Figaro 11“.
|
|
|
Residential House
Hyxa, Petr ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
This is a two-floor detached house with partly basement and garage which is incorporated. The supporting structure is made up of bricks Medmax filled reinforced concrete. Construction of ceiling is realized from the panels Med10 and reinforced concrete, which is made carrying construction. The building is based on concrete foundations. Construction of the truss is purlin’s and rafter’s type. The roofs are forming a gabled shape.
|
|
|
Detached house, Znojmo
Antoš, Jan ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
This is a detached family house in a partially built-up area. The building is situated in the region of Znojmo in the town of Sedlešovice. The building has two floors without cellar. In the ground floor is entrance hall with dressing room, living room and kitchen, study, bathroom and garage. On the second floor are two rooms, bedroom, bathroom, toilet and dressing room. From the hall is the entrance to the terrace. The house is based on the footings of plain concrete and is built from the building system HELUZ with contact insulation system from company ISOVER. The roof is pitched with a inclination of 30 °. Roofing tile is clay TONDACH - FIGARO. Built-up area is 172,93 m2. Also includes is a seminar paper on the topic Anchoring on the tercce railing.
|
|
|
Mixed-use building in Brno
Kopecký, Lukáš ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.
|
|
| |
|
|
Architectural and technological project Residence Na Plachtě
Kvapil, Michal ; Kolečkářová, Barbara (referee) ; Kantová, Radka (advisor)
Writing of this master thesis was stimulated by my participation on compulsory practice and the level of its interest. The master thesis includes the description and technical documentation for the construction of the reinforced concrete building foundations. The aim of this thesis is to solve the method and potential problems of the concreting. As for the concreting machinery, I suggested to use the machines (mixer truck and mobile concrete pump) from the nearby concrete plant to reduce the total transportation costs. I’ve made an analysis of machine renting fees and price of fresh concrete between local distributors. The main contribution of the master thesis is acquaintance with the construction of the apartment building and with a practical side of preparations before the construction begins.
|
|
|
Family House with Office
Horelicová, Pavlína ; Selníková, Klára (referee) ; Klimešová, Jarmila (advisor)
This is a detached family house with a office. The building has two floors without cellar. In the ground floor is entrance hall, WC, living room with dining room and kitchen, room for guests, bathroom with WC and garage, technical room and separate office with technical facilities and bathroom with WC. On the second floor are two rooms, bedroom with dressing room and two bathrooms, in one bathroom is WC. On the second floor is entry to green roof. The house is based on the footings of plain concrete and is built from the building system Velox with contact insulation system in lost planking. The roof is flat, onesheel. Built-up area is 272,2 m2. Also includes is a seminar paper on the topic Green roofs.
|
|
|
Low-energy family house
Venhoda, Lubomír ; Jelínek, Petr (referee) ; Sedlák, Jiří (advisor)
This bachelor´s thesis focuses on the development of documentaion of a low energy detached house in Vladislav. The project as well as the addenda are elaborated with regard to contemporary legislature and standards. The house is located on plot number 500/51 in Vladislav area. The house has two floors. Dimensions of the house are 13,1x8,35m. The roof of the building is designed saddle roof. The house is performed from the systém Porotherm. The base structure consists of a plain concrete C20/25 concrete base slab thickness of 150 mm. The enclosed essay deals with the topic of wall circuit systems.
|
guest ::
