|
|
Quality in Strategic Management in Companies and Organizations
Růžička, Jiří ; Nenadál, Jaroslav (referee) ; Kotovicová, Jana (referee) ; Fiala, Alois (advisor)
This work deals with the status of quality in strategic management of organizations in industry, services, small and medium-sized enterprises, public organizations and administration. It reflects the development in the Czech Republic in the last 25 years in terms of quality. It concerns establishment processes contained in the Blue Guide and the NLF in the Czech Republic, including some instruments such as certification, accreditation and conformity assessment. The second area of the work deals with the National Quality Policy in the Czech Republic, defined by the Council of quality of the Czech Republic. The main objective is the realization of research and determination / verification, whether the strategic management of organizations polled is used and in what way. What modern management concepts do these organizations use and how are their strategies contained in the individual quality requirements. The results were compared with results of similar research carried out not only in the Czech Republic in the past years, so it would be possible to confirm the trends I´ve observed. The results will be used as a guidance for Czech organizations in respect of the aforementioned topics.
|
|
| |
|
|
Preparation of diagnostic laboratory for accreditation
Mačišáková, Kateřina ; Polsterová, Helena (referee) ; Jandová, Kristýna (advisor)
This diploma thesis deals with the topic of accreditation of a diagnostic laboratory. It analyses theoretical knowledge in the field of accreditation, accreditation agency and its history. It contains a list and sample of documents required for accreditation and a description of the process. Part of the work is also a description of the requirements arising from the standard ČSN EN ISO / IEC 17025. The work briefly introduces the company whose laboratory is to be accredited. The following are the technologies the company uses and wants to accredit. The main part of this diploma thesis is the Quality manual, which was created with all needed attachments. This Quality manual is the most significant document, which is necessary for the process of accreditation.
|
|
|
Risk management in the testing laboratory
Virágová, Tereza ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This thesis is dealing with analyzing risks in an accredited testing labotarory. In this thesis will be made a search of available manuals and literature issued for accredited testing laboratory. In this thesis will be conducted selected analyzes for selected processes. The aim of this thesis is to analyze and asses the risks in chosen processes of testing laboratory and make a a simple tools for the management and elimination.
|
|
|
Design of a suitable length standard for nanp-CT measuring device
Kožiol, Martin ; Jankových, Róbert (referee) ; Šrámek, Jan (advisor)
The diploma thesis deals with the design of three length standards, which will serve to ensure metrological traceability between Rigaku nano3DX, SIOS NMM-1, Zeiss UPMC Carat 850 and other devices located at ÚVSSR BUT and CEITEC Brno. The first part of the thesis focuses on the theoretical acquaintance with concepts closely related to the issue of ensuring metrological traceability. In addition, this section deals with computed tomography and the description of individual devices. The second part of the thesis is devoted to design, production process and testing of individual standards. The last part describes the ensuring the calibration of the smallest standard, the so-called Nano standard and the calculation of the uncertainty of measuring its calibrated length. At the end of the thesis, the outputs of these activities are evaluated.
|
|
|
Preparation of a diagnostic laboratory for accreditation
Malík, Luděk ; Polsterová, Helena (referee) ; Jandová, Kristýna (advisor)
In the diploma thesis, the process of preparation of the selected electrotechnical laboratory for accreditation is described. The thesis deals with the accreditation system of the Czech Republic, which also contains the process of an accreditation. The work contains a summary of requirements from the standard ČSN EN ISO/IEC 17025:2018. A laboratory has to meet these requirements in order to receive accreditation. Following the content of the standard, the short research of metrology is also included. The diagnostic laboratory which is being prepared for accreditation is also introduced. Direct financial expenses of the accreditation are also included. The introduction of new procedures in the laboratory in accordance with requirements from standard, inspection of the present state, inspection and creation of the controlled laboratory documentation in a way to meet requirements from standard ČSN EN ISO/IEC 17025:2018 are encompassed in the preparation for accreditation. The laboratory requires software of a suitable type to be selected, which suits accreditation and helps the laboratory maintain controlled documentation in order, as well as metrology processes.
|
|
|
Design of a suitable length standard for nanometology at the CMI Brno and CEITEC Brno
Češek, Jakub ; Jankových, Róbert (referee) ; Šrámek, Jan (advisor)
The thesis deals with the design of a suitable length standard for nanometrology. This length standard will be used for metrological traceability of the Rigaku nano3DX located at CEITEC Brno and the SIOS NMM-1 device which is located at ČMI Brno. The first part is focused on the description of these measuring instruments, the analysis of their metrological traceability requirements and the requirements for the material length standard. The second part is devoted to the concrete possibilities of the etalon design, 3D printing of the prototype of the standard and verification of its dimensional compatibility. At the end of the thesis, the evaluation and selection of the appropriate standard design is made.
|
|
|
Implementation of selected parts of the ČSN EN ISO/IEC standard 17025:2018 in the calibration laboratory
Krejčí, Lukáš ; Jankových, Róbert (referee) ; Šrámek, Jan (advisor)
In this diploma thesis comparison of the current state against the requirements of the standard ČSN EN ISO/IEC 17025: 2018 is made at first. The comparison is followed by proposals for the creation of the missing documents which will become part of the controlled documentation of the selected calibration laboratory in the future and will be used to obtain accreditation. These documents are focused specifically on process management of the calibration laboratory and the procedure for determining uncertainty of measurement in calibration. Proposals are created in a way to match the specifications of standard ČSN EN ISO/IEC 17025: 2018. In the conclusion chapter of this thesis there are recommendations for calibration laboratory which should be considered before applying for accreditation.
|
|
|
Akreditace ve Státních léčebných lázních Bludov, s. p.
Vilímová, Veronika
The diploma thesis deals with the benefits of accreditation in the Bludov spa by comparing the standards of two czech accreditation companies - Spojená akreditační komise, o. p. s., and Česká společnost pro akreditaci ve zdravotnictví, s. r. o. The thesis aims to evaluate the benefits of accreditations in general and in relation to the Bludov spa, who were a successful applicant with both accreditation companies. Included in the work is a questionnaire survey, which took place among spa employees in order to more comprehensively evaluate the benefits of accreditations. The work has clearly shown that accreditations affect the quality and safety of provided services in the examined spa and are verifiably beneficial in spa industry.
|
|
|
Preparation of a diagnostic laboratory for accreditation
Malík, Luděk ; Polsterová, Helena (referee) ; Jandová, Kristýna (advisor)
In the diploma thesis, the process of preparation of the selected electrotechnical laboratory for accreditation is described. The thesis deals with the accreditation system of the Czech Republic, which also contains the process of an accreditation. The work contains a summary of requirements from the standard ČSN EN ISO/IEC 17025:2018. A laboratory has to meet these requirements in order to receive accreditation. Following the content of the standard, the short research of metrology is also included. The diagnostic laboratory which is being prepared for accreditation is also introduced. Direct financial expenses of the accreditation are also included. The introduction of new procedures in the laboratory in accordance with requirements from standard, inspection of the present state, inspection and creation of the controlled laboratory documentation in a way to meet requirements from standard ČSN EN ISO/IEC 17025:2018 are encompassed in the preparation for accreditation. The laboratory requires software of a suitable type to be selected, which suits accreditation and helps the laboratory maintain controlled documentation in order, as well as metrology processes.
|
guest ::
