|
|
Finding kinematic quantities of a mechanism and a structural analysis of its members after blockage
Zvozil, Ondrej ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Diplomová práca, ktorá vznikla v spolupráci so spoločnosťou AUFEER DESIGN (AFD), sa zaoberá analýzou konkrétneho stieračového mechanizmu automobilu. Najprv je uvedená stručná história stieračov. Stieracie sústavy sú potom rozdelené podľa ich usporiadania a spôsobu pohonu. V nasledujúcej kapitole je formulovaná problémová situácia, problém a systém podstatných veličín. Kinematické veličiny kľúčových bodov mechanizmu sú určené analytickým aj numerickým prístupom. Výpočtový model pre kinematickú analýzu je vyvinutý v Matlabe a SimMechanics. Ďalšia časť je venovaná vytváraniu konečno-prvkového modelu v programe ANSA. Všetky deformačne-napäťové analýzy sú vykonané v programe Abaqus. Prvá z nich je parametrická štúdia, ktorá odhaľuje kritické polohy mechanizmu z hľadiska tlakového namáhania určitých súčastí. Mechanizmus v kritických polohách je potom zaťažovaný so zablokovanými ramenami stieračov. Nakoniec sú urobené lineárne analýzy straty vzpernej stability súčastí, u ktorých môže nastať, nasledované nelineárnymi analýzami so zahrnutými imperfekciami.
|
|
|
The High Pressure Fuel System Application for CI-engine
Ševčík, Ondřej ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
This thesis focuses on the design of new high pressure injection system application on diesel engine. The design came from company Zetor’s demands. For this application was chosen system Common Rail supplied by company Bosch. Assignment was separated into several tasks. Research of suitable components for low pressure section, design of waste system and high pressure injection tubes design including injector clamping. Due to injectors used in this system was necessary to redesign cover for valves and even new system to lead wires from outside of the engine to injectors. Injector is attached by screw connection, which is composed from screw and clamping jaw. These parts are subjected to an analytic calculations. Clamping jaw of injector is even subjected to a FEM analysis, which focuses on fatigue life. Finally, the drawings were documented.
|
|
|
Modelling of L2 Loop-Preventing Protocols
Hrnčiřík, Matej ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
This thesis informs about currently used technologies, which provide loop protection on data link layer of computer networks. It clarifies issues of Ethernet networks. Chosen protocols are then closely described. There are presented advantages and disadvantages of chosen protocols and they are compared to other technologies. Practical section describes the initial implementation of IS-IS in OMNeT++ environment, which serves as the basic building block of TRILL protocol. An important issue is to verify correctness of implementation.
|
|
|
Multicast Distribution Trees Modelling in OMNeT++
Malik, Adam ; Ryšavý, Ondřej (referee) ; Veselý, Vladimír (advisor)
Support of multicast routing and its implementation is one of the main goals in nowadays computer networks. Adapting new technology could be often challenging and connected with difficulties. For this reason its better to try it in some simulating enviroment and implement it only after successful results of tests and simulations. The aim of this diploma thesis is to familiarize the reader with the multicast routing, describe the possibilities of network testing in OMNeT++ and come up with new multicast routing framework for this discrete simulation tool.
|
|
|
Comparison of Distance-Vector Routing Protocol
Cocuľa, Maroš ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
This work deals with comparing the distance vector routing protocols. More accurately, protocols EIGRP, RIP and Babel. The aim is to compare information using the simulation OMNeT++, as well as the physical connection. Part of the work is a detailed description of the protocols, simulator OMNeT++ and the libraries INET and ANSAINET. Finally, we summarized the results of experiments and the comparison of protocols with each other.
|
|
|
Modelling of L2 Management Protocols
Rajca, Tomáš ; Marek, Marcel (referee) ; Veselý, Vladimír (advisor)
This thesis deals with modelling and simulation of management protocols on the data-link layer in OMNeT++ tool. Namely protocol CDP, LLDP and ODR routing. These protocols are described in the first thesis' half and in the second half is described their design and implementation in ANSA project. Correctness of implementation is verified by comparison between simulated and real network examples. Also dependencies on module DeviceConfiguratoru were removed from ANSAINET library.
|
|
|
Modelling IS-IS and TRILL
Marek, Marcel ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
In this thesis, we describe the principles of IS-IS routing protocol. We introduce the current state of implementation of this protocol within the simulation framework OMNeT++. We present the implementation of the IS-IS protocol created within the ANSA project. Moreover, we employ its variant called TRILL that is nowadays deployed as replacement of STP in data-center environment. The aim is to enable the modelling of the protocols without the need having to build physical architecture.
|
|
| |
|
|
IPv6 Modelling in OMNeT++
Černý, Marek ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
OMNeT++ is a discrete-event simulator commonly used to build various network simulations. It can be extended by INET framework that supplies models of protocols and devices from TCP/IP environment. This paper explores current capabilities of INET to model IPv6, particularly routing. Implemented extension includes modules of dual-stack router and dual-stack host that support XML-based configuration of IPv6 addressing and static routing. We also introduce an OSPFv3 module that implements most of auxiliary features and is ready for future development of the routing protocol core.
|
|
|
Dynamic State of OMNeT++ Model via SNMP
Smejkal, Jakub ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
This work outlines ways of getting dynamic state into OMNeT++ model. SNMP as major technology was selected for reaching the goals. Protocols CDP and LLDP are participating in topology detection and in theoretical layer Breadth- first search is used. The output of this tool is file syntactically specied by NED language which is describing computer network.
|
guest ::
