|
|
Insulating materials in foundry technology
Slowiaczek, Kamil ; Krutiš, Vladimír (referee) ; Myška, Martin (advisor)
The thesis deals with materials that ensure the insulation of foundry furnaces and ladles. The first part discusses the properties that most affect the insulation capacity. The second chapter focuses on the overview and characteristics of refractory materials. In the next part of the thesis, the most used insulation materials are named and approached. Finally, the thesis deals with the composition of the lining of the electric arc furnace, ladles and the rammed lining of the induction crucible furnace.
|
|
|
The optimization of phosphate binders compozition used for refractories
Kalousová, Hana ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
This thesis deals with optimization of the composition phosphate binders. These binders are used in production of refractories. In this branch, the bauxite is very often used as an aggregate, but it contains tiny particles of iron which arise in milling process. These particles of iron react with the phosphate binder to form hydrogen – it is consequence of the reaction between phosphoric acid and iron. The formed gas causes the formation of bubbles and the deformation of refractories. The goal of this thesis is to find suitable additives which can be used to stop or to limit the production of hydrogen. Usually used binders were replaced by a model binder to simplify the system and for better understanding. The model binder was prepared in laboratory by dissolving aluminium hydroxide in phosphoric acid. They used pure powdered pentacarbonyl iron instead of tiny iron particles from the milling process. The model binder was modified with using a few inhibitors. The calcimetr was used to measure their influence on the production of hydrogen, as well as measuring concentrated rows of selected inhibitors. These rows are necessary to optimize the inhibitors quantity added in the binder.
|
|
|
Improving Efficiency Concept of Machining Technology of Chimney Liner
Kubů, Marek ; Kyncl, Jiří (referee) ; Sedlák, Josef (advisor)
Diploma thesis contains introduction of a company P-D Refractories CZ a. s., where the manufacture of ceramic chimney liners is. Followed by a description and analysis of the product in the entire production cycle, material and product spectrum. Based on the results of current production is created proposal to streamline the machining technology with a view to increase productivity and reduce defective products, which means determine the material of a tool and the method of machining. The work is finished by technical-economic assessment, where the summary and recommendation of the proposed solution are.
|
|
|
A Draft of a Corporate Financial Plan
Seidl, Jakub ; Ing. Martin Liebl, MBA, LL.M., DBA (referee) ; Karas, Michal (advisor)
This master’s thesis is focused on a Draft of a Corporate Financial Plan for industrial company P-D Refractories CZ a.s. for years 2019 to 2022. First chapter of this master’s thesis is oriented in goals, methods and approaches of this thesis. Next part is aiming at theoretical solution for financial planning. Third chapter contains information about analyzed company, application of selected methods of strategic analysis and financial analysis including evaluation of the state of company and detection of potential deficiencies. Last chapter of this thesis is focused on suggestion, formation and evaluation of the financial plan for P-D Refractories CZ a.s. for next four years.
|
|
|
The materials used in Honeywell Aerospace Olomouc and their characteristics in relation to manufacturing processes
Byrtus, Robin ; Němec, Karel (referee) ; Věchet, Stanislav (advisor)
This bachelor’s thesis deals with materials that are used at Honeywell Aerospace Olomouc in the production of static aircraft engine parts. The first part both defines the required attributes of materials used in the aerospace industry and deals with thermal processing, chemical composition and structure. In the next part, there are selected some materials that are used at Honeywell Aerosapce Olomouc. The aim of the thesis is to evaluate the advantages and disadvantages of these materials, as well as influence of the materials attributes on production processes and the prospect of their use.
|
|
|
Vanadium corrosion of refractory materials
Florian, Ondřej ; Opravil, Tomáš (referee) ; Ptáček, Petr (advisor)
The bachelor thesis is focused on the influence of vanadium corrosion process on the corrosion and properties of high-alumina refractory products used in gasified on production of synthesis gas from a carbon feedstock, water on oxygen. The composition, properties of refractory product and mutual interaction of corrosion processes was investigated by method of thermal analysis, X-ray diffraction analysis and scanning electron microscopy.
|
|
|
Inhibition of hydrogen evolution in aluminum-phosphate refractory binders
Bednárek, Jan ; Kalina, Lukáš (referee) ; Šoukal, František (advisor)
The thesis deals with the possibilities of inhibition of the reaction of aluminium-phosphate binders with wear iron, which is contained in bauxite. This material is mixed with phosphate binders to form refractories. The hydrogen is produced by this reaction causing the mixture foaming. The amount of evaluated hydrogen was observed by the measuring by the Jank’s calcimeter. Also the shape of oxidation-reduction potential of the binders was measured before and after mixing with aggregate, using potentiometer. The influence of the addition of various cations on the hydrogen evolution and on the oxidation-reduction potential was observed. The effectiveness of the inhibitors was studied also visually by forming test elements.
|
|
|
Insulating materials in foundry technology
Slowiaczek, Kamil ; Krutiš, Vladimír (referee) ; Myška, Martin (advisor)
The thesis deals with materials that ensure the insulation of foundry furnaces and ladles. The first part discusses the properties that most affect the insulation capacity. The second chapter focuses on the overview and characteristics of refractory materials. In the next part of the thesis, the most used insulation materials are named and approached. Finally, the thesis deals with the composition of the lining of the electric arc furnace, ladles and the rammed lining of the induction crucible furnace.
|
|
|
Olivine and his industrial uses
Novotný, Petr ; Matějka, Dobroslav (advisor) ; Faltus, Miloš (referee)
This thesis is focused on the minerals olivine group, and their bearing deposits and practical use in industry. Specifies the structural, chemical and physical properties of minerals and is a prominent member of the group of olivine, which are given their distinctive characteristics. It also discusses the world's largest producers of olivine and especially the specific uses of this mineral, especially for industrial purposes. Keywords Olivine, olivine group, refractory materials, abrasive water jet cutting
|
|
|
A Draft of a Corporate Financial Plan
Seidl, Jakub ; Ing. Martin Liebl, MBA, LL.M., DBA (referee) ; Karas, Michal (advisor)
This master’s thesis is focused on a Draft of a Corporate Financial Plan for industrial company P-D Refractories CZ a.s. for years 2019 to 2022. First chapter of this master’s thesis is oriented in goals, methods and approaches of this thesis. Next part is aiming at theoretical solution for financial planning. Third chapter contains information about analyzed company, application of selected methods of strategic analysis and financial analysis including evaluation of the state of company and detection of potential deficiencies. Last chapter of this thesis is focused on suggestion, formation and evaluation of the financial plan for P-D Refractories CZ a.s. for next four years.
|
guest ::
