|
|
Chain conveyor for moving pallets
Doležel, Tomáš ; Zeizinger, Lukáš (referee) ; Kašpárek, Jaroslav (advisor)
This work deals with the design of a chain conveyor. It is divided into four parts. The first of which deals with the search for similar conveyors and handling units. The second design of the conveyor component. The third calculation of functional dimensions and forces. And the fourth is the strength calculations of selected structural units of the chain conveyor. The output of the bachelor thesis are drawings.
|
|
|
Cranked chain conveyer
Komínek, Vojtěch ; Zdařil, Josef (referee) ; Špička, Jiří (advisor)
Output of this diploma work is an overall project of the Cranked Chain Conveyer, arising from specification of the assignment. Project is divided into several phases, whereas first of them is composed of calculations and finding of necessary driving unit. First phase is followed by second phase, where I - regarding the engine power - dimension individual structural parts like loop chain, conveyer drive unit, stressing etc. In last phase I deal with drawing documentation of designed parts of the conveyer.
|
|
|
Design of stepping grate for deburring machines
Mazánek, Jan ; Dokoupil, Vladimír (referee) ; Omes, Jiří (advisor)
This master’s thesis is focused on design of stepper conveyor, that is used for transport od round bars of lengths from 3 m to 12 m and diameters from 20 mm to 100 mm between chamfering machines. It is a machinery assembled from chain conveyors and roller conveyors, which allows transverse and lengthwise movement of bars. The main goal was reduction of energetic demands compared to present solution of conveyor.
|
|
|
Conveyor changer
Chlapečka, Tomáš ; Jonák, Martin (referee) ; Pokorný, Přemysl (advisor)
This bachelor´s thesis contains structural design of transfer point (traverser) for europallets between roller conveyor and chain conveyor and it deals with structural design of the tweve meters long chain conveyor. The lift of the traverser is resolved by electric actuators. It is designed for a fully-loaded europallet´s to the weight of 1200kg. The thesis includes 3D model of traverser and chain conveyor, basic strength and functional calculations, drawings of the assembly.
|
|
| |
|
|
Design of chain transfer with creating a batch of bars
Horký, Pavel ; Omes, Jiří (referee) ; Knoflíček, Radek (advisor)
The diploma thesis deals with the design of mechanism for manipulation with bars and creating a batch of square steel bars. In intoduction of this thesis is describtion of principle of curent mechanisms. In following chapters are described the most important parts of new mechanism and their design. In final sections are risk analysis and financial evaluation.
|
|
| |
|
|
Traverser
Zubr, Tomáš ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
In this work is solved construction design of transport hub (traverser) between roller conveyor and chain conveyor for transportation EURO pallet. Between conveyors is right angle. The content of the bachelor thesis is functional construction design with functional calculation of basic parameters. Then drawing documentation complemented 3D model of traverser.
|
|
|
Log handling technology
Skřivánek, Tomáš ; Mergl, Václav (referee) ; Škopán, Miroslav (advisor)
The first part of this bachelor's thesis deals with the analysis of used conveyors for wooden logs. There are described the main differences and reasons for using selected conveyors. The second part deals with the design of an inclined log feeder, which is designed for logs with a diameter of up to 80 cm and a length of up to 5 meters. First, the conceptual design is described, where the procedure for the construction of the main elements of the feeder is justified. After that, the work deals with functional and capacity calculation, choosing the drive unit and selecting the chain. Further analysis are devoted to the design of the weld dimension, checking the beam deflection and checking the strength of the shaft.
|
|
|
Chain conveyor for moving pallets
Doležel, Tomáš ; Zeizinger, Lukáš (referee) ; Kašpárek, Jaroslav (advisor)
This work deals with the design of a chain conveyor. It is divided into four parts. The first of which deals with the search for similar conveyors and handling units. The second design of the conveyor component. The third calculation of functional dimensions and forces. And the fourth is the strength calculations of selected structural units of the chain conveyor. The output of the bachelor thesis are drawings.
|
guest ::
