|
|
A traction drive for an electric bike with motor "Heinzmann"
Němec, Petr ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This work deals with a proposal and construction of a DC/DC converter for a control of a DC motor Heinzmann. The DC/DC converter will be used in an electric drive for a bicycle. The proposal of the DC/DC converter is designed for such engine power to avoid fully any human force to drive - pedaling. The work includes informations about the used motor, progress of proposal and dimensioning of the converter - power circuit and control electronics.
|
|
|
Car-battery charger
Kadlec, Josef ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
This bachelor’s thesis is considered by projection and construction of the car battery charger with switching source. One-pulsed conducting changer is base of this charger. The charger is intended for accumulators of nominate voltage 6 and 12V. Accumulators are charged by method of constant voltage with current limitation of 0.5A, 5A, 20A and 50A. Value 50A has reason during stating of car for example in winter, because the charger helps to battery. The device is equipped with additional protection, which protects the charger and also the accumulator and the supply network. Three pilot lights are the next equipment of the device.
|
|
| |
|
|
Switched resonant power supply
Štaud, Stanislav ; Vorel, Pavel (referee) ; Kratochvíl, Tomáš (advisor)
This thesis deals with desing of serial resonant converter with regulation output voltage in full bridge configuration like alternative power switching converter with pulse width modulation. The thesis includes analysis of serial resonant converter, desing power transformer, driving circuits. The thesis concludes with the functional converter and complete technical documentation.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
|
|
Relay output module for electronic tachograph
Feilhauer, Petr ; Sirka, Martin (referee) ; Zezulka, František (advisor)
This bachelor thesis contains detailed description of function and wiring current Electronic tachograph RE1xx from company UniControls-Tramex. For comparison there is mentioned description of competitor’s products from this branch. The part of this thesis is analysis of measurement actual speed on the train vehicles and analysis of imaging information to staff of vehicle. The base of this finding is making several projects about future way of development of this electronic tachograph. Main programmes of this thesis are design, implementation and verification functions of module relays outputs for Electronic tachograph RE1xx. Practically design must be satisfy with basic technical-law specifications, which refer of this branch for application this device. Thesis contains the description of single parts of scheme, control microcontroller, using of integrated circuits. Further thesis will contain theoretical calculations, design of main software and his implementation to the module. The aim of design and implementation of module relays outputs is evaluation reached outcomes from view technical solutions, functions and price statement of the module.
|
|
|
Two-quadrant regulated power supply for laboratory purposes
Kalus, Jiří ; Vorel, Pavel (referee) ; Knobloch, Jan (advisor)
The main goal of the bachelor´s thesis is a suggestion of switching power supply with energy absorption for the case of two-quadrant load. The source includes of three parts: the power for the control circuit, single-converter and absorber of the recovered energy. Output power source is 400 W and output voltage 0 to 40 V, current +10 / - 10 A. This bachelor´s thesis deals with the first half of the circuit description and the second part there are analysis and the suggestion. Scheme and printed circuit cards are in attachment.
|
|
|
Switched power supply with current limiting
Staněk, Michal ; Brančík, Lubomír (referee) ; Kubíček, Michal (advisor)
This thesis is focused on design and construction of switched mode power supply with continuous regulation of output voltage and current. The Power supply is designed as a switching power supply to reduce its weight and dimensions. To reach better parameters, it consists of two separate converters. The first one is isolated step-down controller with transformer. It supplies output the second controller (adjustable) and the measuring section with stable voltage. Input converter is designed as a simple single-transistor flyback converter. The TOPSwitch circuit was selected to reduce number of components. Output bench power supply is non-isolated buck converter with single transistor. For second converter the TL594 was selected as a control circuit, which typical aplication was modified to fulfill requirement of the bench power supply. Processor ATmega16 was used to show both required and actual values of current and voltage on a display.
|
|
| |
guest ::
