|
|
Innovation of the bucket elevator
Hála, Ondřej ; Frýza, Josef (referee) ; Brandejs, Jan (advisor)
The bachelor thesis deals with the innovation of the bucket elevator. The thesis is focused on design modification of the elevator in the areas where the transported material is settled. Settled material causes decay and subsequent contamination of the fresh material. Main purpose of this paper is to propose design solution to improve cleaning of the feed boot of the bucket elevator. The next innovation deals with the modification of the marking system and efficient series of the elevators.
|
|
|
Lifetime measurement of current carriers in silicon solar cells structures
Macháček, Martin ; Hégr, Ondřej (referee) ; Boušek, Jaroslav (advisor)
This thesis deals with a lifetime measurement of current carriers in silicon solar cell structures. In the first chapter there is a description of several recombination models and their participation at a final effective lifetime value. By using these recombination models in a computer simulation it is possible to receive approximate evaluation of some important silicon solar cell structure parameters. The PC1D simulation program was used for this thesis. For the lifetime measurement of real test-wafers two methods were used: QSSPC (quasi-steady-state photoconductance) and MW-PCD (microwave photoconductance decay). There is a detail description of these methods, used measurements machines and differences between both of them in the chapter four. The main objective of the thesis is mentioned in the last chapter, which is mainly focused on a chemical passivation of silicon wafers and deals with a problem of post-passivation wafer cleaning. There are three passivation techniques mentioned: the iodine in ethanol solution, the iodine and polymer in ethanol solution and the quinhydron in methanol solution. In two cases a results, that are adequate to return the tested wafers in the manufacture process, were achieved.
|
|
|
Dry Ice Blasting and Industrial Practice
Konečná, Eva ; Máša, Vítězslav (referee) ; Kuba, Pavel (advisor)
This thesis deals with the subject of dry ice blasting and its industrial practice. The key charakteristics of dry ice are described as well as an overview of dry ice blasting practical usage in various industries. Main part of this thesis focuses on a study of dry ice degradation, through a series of experiments and observations.
|
|
|
Automatic cleaning screens for small hydro power plant
Franc, Lukáš ; Zeizinger, Lukáš (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis deals in the first part with use of rake screens and their distribution by relevant parameters. The first part is an overview of the different types of rake screen cleaning devices. The second part deals with the construction plan of the device, which will be placed in the entrance of a small water power plant. Further the thesis includes technical calculations which were necessary for the choice of components. Finally the last part is a strength calculation of the main parts. The drawing documentation of the device and its parts is provided as an attachment.
|
|
|
Cleaning of ventilation systems and potential energy savings
Lapáček, Milan ; Rubina, Aleš (referee) ; Máša, Vítězslav (advisor)
The main aim of this thesis is to explore fouling of air ducts and its influence on energy consumption of HVAC systems. The first part focuses on typical parts that create the IAQ in buildings and on evaluating energy consumption of air transportation. The following section deals with the theories of fluid flow, flow regimes and pressure losses that are created as a side effect. The thesis outlines possible methods of assessing the impact of pollution with an emphasis on pressure losses and their influence on the fan power consumption. The actual experimental measurement, conducted in a selected industrial plant, is focused on an influence of cleanness of textile diffuser on HVAC device power consumption. For the further research of this process, measuring equipment with suitable measurement method is designed and constructed.
|
|
|
Interaction of Lanthanide trichlorides with the construction materials of a purification apparatus
Novotný, Radoslav ; Zmrzlý, Martin (referee) ; Richtera, Lukáš (advisor)
Lanthanide halides LnX3 are the base material for preparation a different compounds, but also the pure metals. Our faculty is used for the syntesis organometallic catalyst. This compounds are very sensitive to the presence of moisture and oxygen. Lanthanide halides are commercially available in anhydrous or hydrated form. This thesis is devided eight chapters and deals with matherial of the apparatus, which is designed to sublimation of anhydrous lanthanide halides. Initial chapters described the properties and preparation this substances. Following are on the sublimation and corrosion materials. In the last chapter is the skeleton sketch, layout and a availability parts of construction. The aim of this work was to create theoretical basis of construction aparatus and commissioning.
|
|
|
Design of High Pressure Washer
Nyklová, Klára ; John, David (referee) ; Sládek, Josef (advisor)
The topic of this master´s thesis is a design of high-pressure washer designed for hobby and semi-professional users. The work deals with analysis of current state of knowledge, basic technical parameters and the design of high pressure washer. The goal of this thesis is to create a new product that will meet technical, ergonomic and aesthetic requirements.
|
|
| |
|
|
Insulating Properties of Flip Chip Structures
Dóczy, Robert ; Šandera, Josef (referee) ; Pulec, Jiří (advisor)
This work deals with the insulation properties of microelectronic structures. Specifically, insulation resistance of the gap that separates the conductive parts of the system. There are also described the influences, which have the effect on insulation resistance and the methods by which the insulation resistance is measured. There are also slightly described the issues of designing microelectronic packages and ways in which the microelectronic chip can be connected to the circuit. In the experimental part, the thesis deals with specific design of microelectronic structure such as flip-chip. Conductive pattern of this structure was made to allow the measurement of insulation resistance which depends on the application materials which were used in structure assembly. For this purpose, the structures also undergo a series of cleaning, whose influence is also discussed.
|
|
| |
guest ::
