|
|
Conversion of Grain Silo in Zlin
Klímová, Radka ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The subject of the Bachelor thesis is conversion of grain silo in Zlín-Prštné. Building plot is between avenue of Tomáš Baťa, Přímá and Jateční. Close to the building is situated railway station Zlín-Prštné. The aim is to design creative centre for artists, designers, architects and others. They will be allowed to rent here a space for the realization of their ideas. Part of the proposal was to create a square on the investigated area.
|
|
|
Family house
Kuttelwascherová, Kristína ; Svoboda, Jiří (referee) ; Hlavačka, Tomáš (advisor)
Bachelor´s work is two-floor family house project. The house will be used for family of four. There is a garage situated on the first above floor which is conected to a covered lee with the family house. On the lee continue vestibul with the corridor to the technical room and to the living room, which is connected with the kitchen and dining room, which follow to the outside terrace. From the living room is possible access to the hall and from the hall to the study room, bath room and WC. In the living room are stairs up to the second above floor. There is a hall of communication space from where you can go to the bed room, bath room with WC, changing room and two rooms. From the bed room is possible entrance on the terrace, which is above study room. The family house have untypical ground plan with saddle roof and shed roof above the garage. This project was made using of computer programme AutoCAD. During the making was put emphasis on correct disposal and architectural solution and safe using building.
|
|
|
Production of women´s clothing
Šťastná, Vladimíra ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The theme of my bachelor project is design of industrial factory producing women´s clothing in Brno – Zidenice. Building site in sloping terrain is used for right orientation of 3 buildings – an industrial hall, an affiliated storehouse and an auxiliary technic base. Part of the industrial hall is cantilevered and also the orientation reacts with the environs. Main ideas were to use the view and to group building to optimize producing process, also to build up satisfactory base for employees, as well as to impress people inside and outside the factory.
|
|
|
Family house
Čejka, Radek ; Svoboda, Jiří (referee) ; Hlavačka, Tomáš (advisor)
The subject of this bachelor´s thesis is the proposal and preparation of project documentation of a family house on the land parcel No. 229/10 in the Rabštejnská Lhota village. The house is situated in flat terrain. This is a two-floor house with garage, no basement. The house is designed maximum for a family of five. The perimeter walls of the house are made of limestone blocks insulated EPS polystyrene insulation. The ceiling is made of reinforced concrete beams POT and ceramic Miako. The supporting roof structure is made of wood trusses. Above the garage is a terrace. The roof of the shed and vegetation. The building is ventilated using forced ventilation. The building is in the B-very economical category according to the energy envelope.
|
|
|
Detached House with Atelier in Hořice
Svoboda, Jiří ; Nováková, Tereza (referee) ; Kalousek, Lubor (advisor)
The bachelor’s thesis deals with the projection of a detached house with an atelier in Hořice. Hořice is a small village located 7kms from town Blansko, which has almost 20,000 inhabitants. This building is situated in author’s village, and therefore the local conditions in terms of construction are very well known. The building was placed in a real plot opposite the place where the author lives. The house has two floors, one floor is a partial cellared. The cellared part is accessible from the street (east side). In the southern part of the basement is designed atelier - a commercial space accessible to the general public. In the northern part there is a garage for two cars and the side entrance to the detached house. The ground floor is a private space for housing. The upper floor is 5+KN. The house has no problem to accommodate a family about 5 members, and also it’s able to accommodate some visitors or grandparents. The rooms are comfortably designed and offer a lot of use for a modern family life. The main entrance to the detached house is through the outdoor staircase. The building is made out of brick, perimeter walls of the lower floors are made of concrete blocks and the top perimeter walls of burnt bricks from the clay. Both floors connect the reinforced concrete staircase. The house is covered by a flat roof. Exterior doors and windows are from aluminum. The building is clad by travertine blocks. The building is connected to the necessary engineering networks. The project documentation is developed in accordance to the decree of the building documentation.
|
|
|
BUT Technology Transfer Centre
Vojtěšek, Jiří ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The concept of design is in contrast rectangular mass units with a soft outer shell halls. This transparent ETFE foil sheath immaterial defines the basic volume halls. In contrast, there is the austere cubic mass, consisting of a layer of vertical adjustable curtains in red, which allow control of lighting conditions indoors. Working solution is based on the universality and flexibility of spatial concepts, for use of the area is variable, reflecting the wide professional profile Sciences and technically oriented part of the faculty. Building structure enables change of any user, modification technologies in short cycles and adaptability in terms of surface require. At the is used the principle of "shell and core", ie equipment basic service core is enclosed inside, and other equipment will be easily refillable according to the needs of a specific user. The design consists of three consecutive mass communication-related neck. At the first mass there is entrance space, sanitary facilities, offices, laboratories and technical facilities. At other two mass there are halls, the first is about half the size of the other. These indoor spaces can be variably split a total of 12 identical units (for each unit are the storage areas, sanitary facilities and offices) Storage areas are placed under the hall, as well as underground parking. Connecting neck serves not only to communicate as such, but it is a social or relaxing space. In this area at the same time meet all the staff and transmit a valuable experience.
|
|
|
BUT Technology Transfer Centre
Tran, Hoang Long ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The subject of my bachelor’s thesis is a lately constructed building of BUT Technology Transfer Center in the city of Brno - Kralovo pole, in the street Kolejní within University Campus BUT Pod Palackého vrchem. University Campus BUT is in a full expansion and they are still building new buildings. Concept of Technology Transfer Center is concluded in the project Generel from architects Pech and Fixel and it copies the defined shape of parcel. Height of building does not stand out because of the function and purpose of the work. The building consists of offices, laboratories and factory hall.
|
|
|
BUT Technology Transfer Centre
Jabůrková, Dominika ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
¨Bachelor thesis addresses the subject Technology Transfer Centre Brno - Královo pole- at Palacky hill in the technogy park Brno. TTC represents the institutional framework for the development and application of the results reserch at Brno University of Technology. It is also the contact point for companies interested in cooperation with the Technical University in the provided fields. The closest area is characterized by the proximity of different functions - universities, office spaces, space for light manufacturing, university colleges. The proposed building has four floors, simple monoblock, which replicates the shape of the land (trapezoid) is differentiated into 5 parts. These parts allow any hire parts of the object. The building have productions hall with private facilities, offices, laboratories and parking. The dominant feature is the entrance hall, which is glass and open. Entrance is framed with corteno sheet. In entrance hall is open staircase with corten banister, which is addressed in Part D in architectural detail. Supply object is behind the building, there are manipulating courts which are directly linked to the warehouses. The building is oriented mainly longitudinally - East west.
|
|
|
SMS Enterprise Premises
Máslová, Jana ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
Buildings for small and medium businesses constitute separate premises adjacent to D2 highway exit to the city of Modřice and village of Chrlice. Design of these buildings is based on simple composition of cuboid forms in order to create partly enclosed entry compass enliven with greenery. This space also serves as a resting place in the time of pauses. Frontage of buildings is appended with foremost facade consisting of blocks of various colours and materials that results in interesting and playful appearance of buildings. Therefore, despite its production purposes, the whole campus creates an impression of a residential area. The main architectonic goal was to create building (buildings) with as flexible utilization as possible, while respecting important role of incorporation of nature and greenery into premises.
|
|
| |
guest ::
RSS feed.