|
|
Low temperature fuel cell for ultra-light-plane
Hladiš, Lukáš ; Brázdil, Marian (referee) ; Pospíšil, Jiří (advisor)
This thesis deals with the concept of propulsion for ultralight plane with using fuel cells technology. Here are described the individual kinds of fuel cells and possible fuel. Furthermore it is listed the calculation of low-temperature fuel cell H2 - O2 with polymeric membrane (PEM). The thesis includes also a part with the design drawings of the proposed solutions.
|
|
|
Heat transfer on sprinkled tube bundle
Copek, Tomáš ; Pospíšil, Jiří (referee) ; Kracík, Petr (advisor)
This bachelor thesis named Heat transfer on sprinkled tube bundle deals with experimental assesment of heat transfer coefficient on sprikled tube bundle. Its goal is to measure, compare and evaluate values and trends of heat transfer coefficient on external surface according to flow rate of cooling water. Evaluation will be focused on size of pitch between tubes, type of tubes surface and influence of temperature gradient. Measurement was ongoing at atmospheric pressure. Warm water flowing in tube bundle is cooled by cold sprinkling water. Tube bundle consists of ten tubes located horizontaly beneath each other with smooth, grooved or sanblasted surface. Distance between tubes vary from 15 to 35 milimetres. Measurement of two temperature gradients 15-40 and 15-45 (15°C is temperature of sprinkling water in distribution tube; 40°C or 45°C is temperature of water entering the tube bundle) is carried out for each pitch and tube surface.
|
|
|
The energy demand of an indoor ski slope
Mozola, Ondrej ; Linda, Jakub (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis deals with the issue of energy requirements for operation of indoor ski slopes. The first part is dedicated to research of snow making, cooling and construction methods of ski halls along with the examples of specific projects. In the second part, the aim was to design a ski hall with specific geometry and insulation and then define energy losses of such building. Subsequently, all related energy flows were calculated, which led to the determination of the required cooling capacity. Based on this, the cooling cycle was calculated and the overall electricity demand for the operation of the ski hall during the year was set. In the third part, three options for covering electricity needs are evaluated and at the same time they are compared in terms of financial costs during the year.
|
|
|
Economy and ecology of biomass utilization
Plíšek, Petr ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
This bachelor thesis deals with an economic and environmental contexts of biomass utilization. The first part focuses on the description of the nature and manner of use of biomass. Another part is focused on economic aspects related to biomass. A necessity in the processing a particular energy source is its ecological problems, that is the third chapter. The last part is devoted to the design condensing heat exchanger and its output relative to the fuel wetness content, and boiler output with a condensing exchanger depending on the combustion products cooling temperature.
|
|
|
Utilization of absorption systems in the heating systems
Vidlák, David ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
Main goal of this work is familiarization with basic features of absorption heat pumps and it’s growing importance on the market. In the first part of the work there is a research for clarifying facts associated with such pumps. In the introduction there are descriptions of basic information from the field of heating industry and its connections to our systems. Next there is a brief analysis of price changes in electricity and heat in the last five years. Main part of the analytical section is a description of the used absorption system. Second part of the work is focused on the calculation of the absorption system itself. First there is calculated internal and external part of the device according to the parameters from GE Power s.r.o. After this step there are parametric studies based on changes of key parameters of the default device for a demonstration of the behavior of a heating pump. In the end of the work there is a integration of the unit into the heating cycle for variations including flue gas condenser and using a cooling water from the turbine condenser.
|
|
|
Design of a cooling circuit for heat removal from a steam turbine condenser
Susna, David ; Pospíšil, Jiří (referee) ; Kracík, Petr (advisor)
This thesis deals with the problems of wounding of low potential transferred from steam turbine condenser. First, in the theoretical part variations of steam condenser design are described. Then there is a description of variations of cooling cycles and possibilities of their operation range. In second part of the thesis there are two common cooler options chosen. Those are wet cooling tower with natural draft and dry chiller with forced draft. Two types of cooling liquid are chosen to be used for dry cooling. These are water and the other one is 50 % mixture of water and propylene glycol. Based on the calculation results of both cooling cycle variations appropriate pumps are chosen, fan for forced convection respectively. Parts of the thesis are also projection drawings for both calculated variations.
|
|
|
Accumulation of electricity from renewable sources
Plíšek, Petr ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis deals with the issue of accumulation of electricity produced by renewable sources. The first part focuses on the description of possible ways of accumulation, especially with focus on those methods, that are suitable for renewable energy sources. The next part deals with the design of the accumulation energy in the compressed air for the selected photovoltaic power plant. The necessity of designing a particular method of energy storage, is also its technical and economic analysis, which is the content of the last part of the thesis.
|
|
|
Impactor for fine particle collection
Paulíková, Kateřina ; Šnajdárek, Ladislav (referee) ; Pospíšil, Jiří (advisor)
This master thesis provides an overview of fine particles contained in the air and possibilities for their analysis, measurement and capture. In the beginning, the fine particle's size and origin is described. Then, the influence of fine particles on human health is stated. Next, methods of air analysis and fine particle's measurement are presented. Legislation for emissions and immissions in the Czech Republic is summarized. Finally the selected types of impactors are introduced. The practical part consists of three chapters. First chapter contains the fundamental calculation procedure and its subsequent refinement. In the following part the comparison of the calculation procedure with the parameters of the commercial impactor is provided. Lastly, the design of the impactor is created for the specified parameters using the developed calculation procedure.
|
|
|
Regeneration of heat and water for paper drying process
Milko, Michal ; Klimeš, Lubomír (referee) ; Pospíšil, Jiří (advisor)
Diploma thesis titled Regeneration of heat and water for paper drying process analyzes use of waste hot air ventilated from drying section of paper mill. Moreover is described detailed design process of recuperation heat exchanger, which should be part of regeneration loop of paper mill. Designed heat exchanger is plate-fin crossflow heat exchanger. For deasign is used – NTU method.
|
|
|
Aerodynamics of axial wind turbines
Just, Jan ; Pospíšil, Jiří (referee) ; Škorpík, Jiří (advisor)
This master thesis concerns about problematics of wind turbines. The document summarizes basic theory based on the law of momentum conservation which is essential tool for the design and calculation of wind turbines. The theory is complemented by number of correction factors and then used in the design of wind turbine for specific parameters. The calculation is performed iteratively using Matlab software and the actual code is given in appendix. Graphs summarizing the progress of various units along the blades are presented in the document. The final section briefly describes advanced topics of aerodynamics concerning other important factors that the field of wind energy deal with in recent time.
|
guest ::
RSS feed.