|
|
Railway Station Unkovice HSR
Machová, Petra ; Merta, Jiří (referee) ; Říha, Tomáš (advisor)
The objective of the diploma thesis is to design the layout of the railway station on the planned high-speed track Brno – Breclav. The thesis focuses on the station layout including the junction with a branch of high-speed track to Znojmo. New service road to railway station, connected to existing roads, is designed. The station layout design includes a carpark, bus stops, car rental, parking for the disabled, bikers, taxi services and cyclists.
|
|
|
The block of flats
Machová, Petra ; Skřek, Daniel (referee) ; Beneš, Petr (advisor)
The subject of the bachelor´s thesis is the design of an apartment building in Horní Maršov, a village located in Eastern Giant Mountains near Trutnov city. The building plot is located in the built-up center of the village near the square. The floor plan of the house is simple, rectangular. The construction system of the house is a wall made of ceramic bricks with ceilings made of monolithic reinforced concrete slabs. The roof is designed as a vegetation, counter, double-skinned with extensive greenery. The height of the building is divided into four above-ground and one underground floor, which are connected by a two-armed staircase with intermediate landings and an elevator. In the basement, there is a utility room, facilities for tenants. On the first floor there is a rental unit suitable as surgery. The apartment building has a total of 14 residential units designed from size 1 + KK to size 4 + 1, including a unit for people with limited mobility and orientation located on the first floor.
|
|
|
City hall with a multifunctional space
Valášek, Radek ; Machová, Petra (referee) ; Vajkay, František (advisor)
The aim of this master thesis is to design a city hall with a multi-purpose hall in Dolany u Olomouc. The building consists of two parts offices and multi-purpose hall. It is a three-storey building with a basement. It has a flat green roof with skylights and photovoltaics. The basement includes storerooms, garage and technical facilities. It is accessible via wooden stairs and the first floor includes offices, storerooms, sanitary facilities and multi-purpose hall. The second floor includes offices, sanitary facilities, mayor´s office with terrace, small cafeteria and a meeting room with a terrace. Load-bearing envelope walls and internal columns in the basement will be made of reinforced concrete. Other load-bearing walls will be made of sand-lime blocks. The floor slabs will be made of cast-in-place reinforced concrete. The building envelope will be insulated with ETICS. Heating will be provided by gas boilers. The building will be airconditioned by an AC unit in the basement. The project was carried out in the AutoCAD, SketchUp and Lumion software.
|
|
|
Residential building
Valášek, Radek ; Machová, Petra (referee) ; Vajkay, František (advisor)
The subject of the thesis is the processing of project documentation for the construction of a residential building in Olomouc (village Hejčín). It is an object with one underground floor and three above-ground floors. There are 9 residential units in the building. On the first floor there are 3 housing units, one of which is adapted for wheelchair use. There are also 3 dwelling units with the same layout on the second and third floors. The building is designed as a masonry from a construction system of sand-lime blocks. The ceiling structure is made as a ribbed construction consisting of prestressed beams and concrete inserts. The building is covered with a single-layer flat roof. The project documentation also includes a basic assessment of the building in terms of building physics.
|
|
|
City hall with a multifunctional space
Zabáková, Laura ; Machová, Petra (referee) ; Vajkay, František (advisor)
The main task of the master project is to design a nearly zero energy local council building with multipurpose hall in Syrovice cadastral area. It is a three-storey building with basement. In the basement there are technical facilities and garage. Ground floor includes conference room, multipurpose hall, kitchen, cloak room and toilets. First floor includes offices, archive, staff kitchen and toilets. The building’s vertical load-bearing structures are a combination of ceramic block masonry and reinforced concrete columns. Envelope walls are insulated with mineral wool and XPS. The floor slabs and the staircase are designed from cast-in-place reinforced concrete. The building has flat extensive green roofs with photovoltaics installation. The building is equipped with HVAC system with mechanical ventilation with heat-recovery, floor heating and cooling supplied by a ground-water heat pump. The building is also equipped with rainwater accumulation system supplying rainwater for the toilets and watering.
|
|
|
Residential building
Svoboda, Martin ; Machová, Petra (referee) ; Vajkay, František (advisor)
The content of this bachelor´s thesis is a proposal of a new building of an residential building in Slavkov u Brna. The apartment building has one underground and three above-ground floors. There are 9 residential units in the building, one of which is designed as barrier-free. There is an underground garage for 9 vehicles in the basement, one of which is for people with limited mobility. The apartment building is based on a reinforced concrete foundation slab 600 mm thick. The vertical load-bearing structures are made of sand-lime blocks. The horizontal supporting structures are monolithic reinforced concrete. The building is covered with a warm flat roof. The work contains the project documentation for the construction, which was made according to the valid legal and technical regulations.
|
|
|
The family house
Meduna, David ; Machová, Petra (referee) ; Benešová, Romana (advisor)
The Bachelor´s thesis elaborates a technical documentation of a detached family house with relaxing facilities. Object is located in the village Svratouch, district of Chrudim. Built-up area is 136.7 square meters. The house has two floors. It is based on the base passages from plain concrete stored in a non-frosty depth, walled building system Porotherm and lost formwork Dek. The roof above the second floor is a saddle roof with dormer-windows. The truss construction is a purlin system. Ceiling structure is made of ceramic inserts Miako and ceramic concrete beams Porotherm. The Bachelor´s thesis includes a sketch, a block plan, a building documentation, fire safety measures, a building physics, seminar work and calculations.
|
|
| |
|
|
Residential building
Smažilová, Marie ; Machová, Petra (referee) ; Benešová, Romana (advisor)
Bachelor's thesis solved design of Residential building in Pikárec.The building has three floors and none basement. House’s situated in gentle slope. The entery is located from local road. Design of building includes parking places for residents. There are seven flats in the building. One flat is maisonette. Every flat has own balcony and in the highest floor is tercce.The roofing is solved by roof girder and roof truss member. The mansonry system of HELUZ company is apllied in this project. Floor structure is designet as prefabricated rib-and-filler floor HELUZ MIAKO.
|
|
|
Veterinary
Šeps, Daniel ; Machová, Petra (referee) ; Vajkay, František (advisor)
The subject of the diploma thesis is the design of a free-standing veterinary clinic building in Nová Paka, in the form of project documentation for the construction. The building of the veterinary clinic consists of 3 rectangles forming a Z-shape, where the entrance to the building of the veterinary clinic, its operational and administrative part is located in the eastern part. In the western rectangle there is a separate and operationally separate entrance to the apartment unit, which is located on the second floor. The entrance to the veterinary clinic building and the housing unit is barrier-free. The building will be located in a slightly sloping terrain (3.49%). The main facade of the building with the entrance to the building is oriented to the southwest. The separate entrance to the apartment unit is from the northeast side. The perimeter masonry consists of the Porotherm system with the ETICS contact thermal insulation system in a thickness of 300 mm and 200 mm ETICS masonry. The internal load-bearing masonry also consists of a Porotoherm masonry system in a thickness of 250 mm. Internal non-load-bearing masonry consisting of the Porotherm system in thicknesses of 115 and 140 mm. The ceiling structure consists of a reinforced concrete slab th. 200 mm. Above the veterinary clinic, the roof area forming the terrace of the housing unit is considered, divided into two parts 1) with a vegetation layer and 2) with a tread layer of concrete paving on the targets. The main waterproofing layer of the flat roof consists of strips of SBS modified asphalt. Above the 2nd floor, a sloping hip roof made of glued wooden trusses is considered, and a sheet metal roofing is considered as the roof covering of the truss roof. The windows are designed with insulating triple glazing. The attic on the flat roof is equipped with an aluminum railing with a vertical bar infill. The building is heated by a gas condensing boiler, the building is also designed forced ventilation
|
guest ::
RSS feed.