|
| |
|
|
Convergence measurement of the vent shaft on the 3rd floor during the mining of coalface No. 292 200/4
Koníček, Petr ; Kajzar, Vlastimil ; Kukutsch, Radovan ; Staš, Lubomír
On the basis of a contract, the Institute of Geonics of the CAS realized repeated convergence measurement of selected part of the mining roads and appropriate part of vent shaft on the 3rd floor in the vicinity of the ČSM Sever vent shaft. The main reason was to capture spatio-temporal and dynamic changes in relation to the mining of the coalface No. 200 200/4. A section of the embankment of the 3rd floor of the vent shaft was selected for the convergence measurement. The work can be divided into 3 separate tasks - terrestrial laser scanning of the vent shaft from level of the 3rd floor, pilot laser scanning of the vent shaft from the skip elevator and evaluation of seismological activity registered during the mining of the coalface No. 292 200/4.
|
|
|
Data Acquisition from the Deep Horizons of the Rožná Mine - Final Report (Technical report SÚRAO č. 464/2020)
Bukovská, Z. ; Švagera, O. ; Chabr, T. ; Leichmann, J. ; Sosna, K. ; Souček, Kamil ; Vavro, Martin ; Zuna, M. ; Navrátil, P. ; Bohdálek, P. ; Bošková, M. ; Dobeš, P. ; Filipský, D. ; Franěk, J. ; Galeková, E. ; Georgiovská, Lucie ; Hanák, J. ; Havlová, V. ; Hlisnikovský, K. ; Holéczy, D. ; Jankovský, F. ; Jaroš, M. ; Jelínek, J. ; Knésl, I. ; Koucká, L. ; Kryl, J. ; Kříbek, B. ; Kubeš, M. ; Kubina, Lukáš ; Kučera, R. ; Kukutsch, Radovan ; Laufek, F. ; Mixa, P. ; Mozola, J. ; Násir, M. M. ; Palát, J. ; Patočka, M. ; Pořádek, P. ; Rosendorf, T. ; Soejono, I. ; Staš, Lubomír ; Vavro, Leona ; Veselovský, F. ; Vorel, J. ; Waclawik, Petr ; Wertich, V. ; Zajícová, Vendula ; Zelinková, T.
Final Report of the Project „Data Acquisition from the Deep Horizons of the Rožná Mine“ presents the results of the study of rock mass properties with respect to the presence of a significant tectonic zone. The study focused on the change of properties in the vicinity of the so-called first zone of the Rožná deposit, but also on the change of these properties with a depth of 12–24. floor of the former mine, 550-1200 m below the surface. Realized works included geological, petrographic, geochemical description of the rock environment, geophysical work (esp. seismics), study of physico-mechanical properties of rocks, transport experiments and deposit revalidation of the Rožná deposit. All work was carried out for the purpose of describing the studied zone and its manifestation with an emphasis on ensuring the safety of the potential location of the deep geological repository.
|
|
|
Possibilities of using 3D laser scanning in geotechnical practise
Kukutsch, Radovan ; Kajzar, Vlastimil ; Šňupárek, Richard ; Waclawik, Petr
We are experiencing the penetration of modern and smart technologies in all sectors of human activity, including mining and geotechnics. One of these technologies is 3D laser scanning, which has seen significant technological advancements over the last decade and has become an integral part of underground construction monitoring as a tool to enable comprehensive, accurate and unbiased capture of the spatial situation in digital form. This development was behind the fact that since 2013, 3D laser scanner has been used by the Institute of Geonics of the Czech Academy of Sciences as a necessary part of the geotechnical monitoring of mine works, when it is possible to precisely detect and quantify the time-space changes caused by man's intervention in the rock mass compared to the traditional established measuring methods. A leading project of recent years was the monitoring of the strain stress state of the rock massif during the 30th seam extraction during the trial operation of the Room and Pillar extraction method in the CSM Mine shaft safety pillar where, besides many other measuring instruments, 3D laser scanning was used for the convergence measuring of roadways, especially for capturing any deformation changes on the permanent pillars. A complementary function was the comparative evaluation with the results of other tools, e.g. with data measured by horizontal extensometers. The subject of the article will be a general description of the possibilities of using 3D laser scanning in geotechnical practice on spatial data acquired during the monitoring lasting almost 3.5 years, when important phenomena were detected in the movement of the pillar walls and the floor heave in the CSM Mine in the tens of cm, sometimes up to 100 cm.
|
|
|
Possibilities of using 3D laser scanning in geotechnical practise
Kukutsch, Radovan ; Kajzar, Vlastimil ; Šňupárek, Richard ; Waclawik, Petr
We are experiencing the penetration of modern and smart technologies in all sectors of human activity, including mining and geotechnics. One of these technologies is 3D laser scanning, which has seen significant technological advancements over the last decade and has become an integral part of underground construction monitoring as a tool to enable comprehensive, accurate and unbiased capture of the spatial situation in digital form. This development was behind the fact that since 2013, 3D laser scanner has been used by the Institute of Geonics of the Czech Academy of Sciences as a necessary part of the geotechnical monitoring of mine works, when it is possible to precisely detect and quantify the time-space changes caused by man's intervention in the rock mass compared to the traditional established measuring methods. A leading project of recent years was the monitoring of the strain stress state of the rock massif during the 30th seam extraction during the trial operation of the Room and Pillar extraction method in the CSM Mine shaft safety pillar where, besides many other measuring instruments, 3D laser scanning was used for the convergence measuring of roadways, especially for capturing any deformation changes on the permanent pillars. A complementary function was the comparative evaluation with the results of other tools, e.g. with data measured by horizontal extensometers. The subject of the article will be a general description of the possibilities of using 3D laser scanning in geotechnical practice on spatial data acquired during the monitoring lasting almost 3.5 years, when important phenomena were detected in the movement of the pillar walls and the floor heave in the CSM Mine in the tens of cm, sometimes up to 100 cm.
|
|
|
Structural mapping of exploration boreholes walls within first phase - Safety boreholes for Boxcut
Waclawik, Petr ; Souček, Kamil ; Vavro, Martin ; Kukutsch, Radovan ; Ram, S.
Structural-geological analysis, i.e. core fracturing assessment within the boxcut safety\nborehole was carried out on the basis of optical televiewer record evaluation. In general,\noptical televiewer (OPTV) probe provides a continuous, unwrapped, high-resolution digital\n360° image of the borehole-walls oriented towards the cardinal points. This technique\nprovides information about the strike, dip direction, dip angle and depth of foliation, bedding\nplanes and fractures, as well as the frequency, aperture and infillings of fractures. Information\nabout spatial characteristics of structural elements is one of its indisputable advantages and\nallows for subsequent statistical evaluations.\nThe structural mapping of boreholes of Boxcut safety boreholes were carried out within the\ncontract of IG CAS (Contract No. D/18/156/00) GEOMET, s.r.o. (as a customer, contract No.\n01/2018). The aim of the contractual research was the realisation and interpretation of the\nfractures by digital logging of boreholes walls.
|
|
|
Roadways stability within coal excavation by room and pillar mining method at the great depths
Šňupárek, Richard ; Waclawik, Petr ; Kukutsch, Radovan
In order to verify the stress-strain state of mining using the room and pillar method at a depth of up to 900 m below the surface, an extensive system of geotechnical monitoring and observation of deformations and surface movement was implemented. Based on the results of the stress-strain monitoring, detailed analysis of roadway stability from the point of view of the convergence, deformation behavior of the surrounding rock mass and the function of the reinforcement used in the two monitored areas with different geological and operational conditions was carried out.
Fulltext:  PDF
|
|
|
Stability of corridors in the coal-pillar excavation process at deep depths
Šňupárek, Richard ; Waclawik, Petr ; Kukutsch, Radovan
In order to verify the stress-strain manifestations of the corridor-pillar excavation at a depth of up to 900 m below the surface, an extensive system of geotechnical monitoring and observation of deformations and surface movement was implemented. Based on the results of the stress-strain monitoring, detailed analysis of corridor stability from the point of view of the convergence, deformation behavior of the surrounding rock mass and the function of the reinforcement used in the two monitored areas with different geological and operational conditions was carried out.
Fulltext: PDF
|
|
|
Final Report - Rating of the deformation stress monitoring the state of the rock mass during mining coal seam 30 (634) within the trial operation of mining method corridor-a pillar in OPJ ČSM - NORTH
Waclawik, Petr ; Kukutsch, Radovan ; Kajzar, Vlastimil ; Ptáček, Jiří ; Staš, Lubomír
Monitoring of the deformation stress state of the rock mass is a prerequisite for the verification of unapproved new mining methods hall-pillar and its further application in the Czech part of the Upper Silesian coal basin. This mining method is designed on the basis of experiences and practices that are verified in different natural conditions and depths below the surface and is therefore essential for the verification of conditions for the Czech part of the Upper Silesian Basin based on geotechnical monitoring. The present report is prepared on the basis of a contract no. 942/50/10, where the Institute of Geonics, v.v agrees to make periodic evaluation of monitoring data napěťodeformačního state of the rock mass. In accordance with the aforementioned agreement, the message is processed in the six-month period and continues in the interim report V/2016 (Waclawik et al. 2016). Interim results of the geotechnical monitoring, such as the experience gained during the first conquest dobývky V show specifics of natural conditions in trial operation unapproved new mining methods hall-pillar.
|
|
|
Partial Report V/2017 - Rating of the deformation stress monitoring the state of the rock mass during mining coal seam 30 (634) within the trial operation of mining method corridor-a pillar in OPJ ČSM - NORTH
Waclawik, Petr ; Kukutsch, Radovan ; Kajzar, Vlastimil ; Staš, Lubomír
Monitoring of the deformation stress state of the rock mass is a prerequisite for the verification of unapproved new mining methods hall-pillar and its further application in the Czech part of the Upper Silesian coal basin. This mining method is designed on the basis of experiences and practices that are verified in different natural conditions and depths below the surface and is therefore essential for the verification of conditions for the Czech part of the Upper Silesian Basin based on geotechnical monitoring. The present report is prepared on the basis of a contract no. 942/50/10, where the Institute of Geonics, v.v agrees to make periodic evaluation of monitoring data napěťodeformačního state of the rock mass. In accordance with the aforementioned agreement, the message is processed in the six-month period and continues in the interim report IV/2016 (Waclawik et al. 2016) passed buyers in April this year. Interim results of the geotechnical monitoring, such as the experience gained during the first conquest dobývky V show specifics of natural conditions in trial operation unapproved new mining methods hall-pillar.\n
Fulltext: PDF
|
guest ::
RSS feed.