|
|
Driver of high brightness white LED
Tomášek, Petr ; Kubíček, Michal (referee) ; Frýza, Tomáš (advisor)
This document is analysing LED driving with switch power supply from electric distribution network 230V/50Hz. In the first chapter you can find short thesis about electric power supplies. Second chapter contains info about power supplies and their safety and EMC requirements. In the third chapter is analysis of LED. Chapter IV. is dedicated to LED power supply circuit desing and the last chapter is about construction and measuring of parametres of designed power supply.
|
|
|
Wireless data acquisition in industry environment
Macura, Jáchym ; Kubíček, Michal (referee) ; Kolouch, Jaromír (advisor)
In the first part of Bachelor thesis is discussed selecting an appropriate standard for wireless data acquisition in industrial environments. In the next part are described the properties of the selected standard ZigBee. The next part is used to introduce and comparison of different ZigBee modules, which are available. In the practical part is represent transmission chain and its description. In the last section of Bachelor thesis are measured results.
|
|
|
Digitally controlled electronic load
Bordovský, Tomáš ; Vochyán, Josef (referee) ; Kubíček, Michal (advisor)
This diploma thesis deals with analysis and exploration of design options, how to design and produce an electronic load. The paper discussed the possibilities of digital control. It also describes the principles of structural components and there was chosen one type variant which is designed to circuits and printed circuit boards. Moreover, the thesis also include technical drawings of mechanical parts. At the end of this paper, final soulution with measurements and parameters are presented.
|
|
|
PHpix interface board
Opioł, Zbigniew ; Matějka, Tomáš (referee) ; Kubíček, Michal (advisor)
This work investigates the interface and properties of an ionization radiation detector with the PhPix chip, which is the basis of a future large-scale detector for use in nuclear medicine. In the next stage, an IP core for communication between the processor system and the PhPix chips on the Zynq platform is designed. Furthermore, software for video transmission over Ethernet interface is developed.
|
|
|
MPPT driver for small UAV
Košút, Martin ; Záplata, Filip (referee) ; Kubíček, Michal (advisor)
This thesis describes a design of a maximum power peak tracking controller for a solar cell array embedded on a wing of a UAV. Solar cells are used to both cover part of the UAV power consumption and (at suitable conditions) to charge onboard battery. As the UAV changes its position and attitude to the sun relatively fast, the lighting conditions on the solar cells change rapidly. Thus, it is necessary to implement a fast maximum power peak tracking regulator to ensure maximum efficiency of the system. The proposed design is based on commercial offtheshelf components. The implemented DC/DC converter, which represents the core of the regulator, is a combination of a stepup and a stepdown converter. Weight, dimensions end overall efficiency were the key optimization parameters of the design.
|
|
|
Selection of Appropriate Forms of Financing Housing
Kubíček, Michal ; Dvořáková, Radka (referee) ; Meluzín, Tomáš (advisor)
This bachelor thesis focuses on options financing living in the Czech Republic. Firstly, there are described some basic terms and concepts which can be relised in immediate contact with this topic. Next part of the thesis describes some forms of living financing. For certain type of investor there were suggested some choices of financing hoousing, there are in short described. In following part there are mendioned individua advantages and disadvantages, icluding the suggestion.
|
|
|
Switched battery charger
Špatenka, Vojtěch ; Kubíček, Michal (referee) ; Kovář, Jan (advisor)
My bachelor thesis deals proposal of switch battery charger and with an issue of charging lead-acid accumulators. It describes their attributes and charging characteristics. Futhermore, it describes a concept and a construction of a switch-mode power supply for charging of these accumulators. The design of a switch-mode power supply according to the programme PI EXPERT 7, the design of an impulsive compensator, the choise of a framework and a centre core, a full-scale scheme of a connection, the design of a PCB, a materials scheduling and their layout on the plate. A concept of controls of the switch-mode power supply using single-chip microprocessor C8051F320 HQ manufactured by Silicon Laboratories. A scheme of integration, a concept of the printed circuit board and a specification of components. At the end of the bachelor thesis was made a suitable chassis from the polycarbonate material. The results and the evaluation of the basic parameters of the of the switch-mode power supply are included.
|
|
|
General purpose analog signal converter
Strážnický, Martin ; Povalač, Aleš (referee) ; Kubíček, Michal (advisor)
This work deals with the design of a galvanically isolated converter of continuous analog signals and the design of a galvanically separated converter of digital TTL signals to HTL signals. The device is complemented by a STM32 microprocessor, which ensures the connection of analog input and output. The result of the work is the circuit structure of individual units, the results of simulations of important units, complete data for the production of device and measured values of individual units.
|
|
|
Small rotor dynamic balancer
Staněk, Michal ; Vyskočil, Pavel (referee) ; Kubíček, Michal (advisor)
Balancing of rotors is used to remove unwanted vibrations caused by uneven distribution of mass around the axis of rotation of the rotor. Operation of an unbalanced rotor may causes shortening of bearing life, fatigue of materials and deformation of shafts. This work deals with construction of a balancing machine (balancer). Because of its good properties, a soft bearing type balancer was chosen for construction. This type of balancer achieves higher sensitivity at the cost of calibration required for each type of rotor. To capture the magnitude of vibration electrodynamics sensors were chosen. To enter data and display results a microprocessor is used.
|
|
|
Generation of the time duration pulse with adjustable delay
Toman, Vít ; Kubíček, Michal (referee) ; Šotner, Roman (advisor)
The bachelor's thesis is engaged on methods and possibilities of square impulses of basic parameters (impulse duration time and delay time) generation by 8-bit AVR microcontroller made by Atmel Corporation and by conception of the generator circuit. Impulse duration time and impulse delay time settings are managed by matrix keypad and they are displayed on matrix display. Impulse power characteristics depend on microcontroller's electrical power characteristics.
|
guest ::
RSS feed.