|
| |
|
|
Mathematical model of synchronous motor width permanent magnet
Fajkus, Petr ; Klíma, Bohumil (referee) ; Huták, Petr (advisor)
The work is focused on the design of synchronous motor control with field weakening possibility. At present synchronous motors used in many applications. Often is used synchronous motor with permanent magnets. This type of motor may have different transverse and axial inductance. In most cases it is desirable to design the engine using a computer model. Therefore the synchronous motor described mathematically in order to create the model of motor. At work is also crated model of synchronous motor control. The control is designed for the highest possible speed range. Therefore, the motor control is consist of two parts. Speed is controlled by voltage in the first part. In the second part speed is controlled by field weakening. Everything is created and simulated in a computer program MATLAB-SIMULINK.
|
|
|
Model of electric vehicle in SIMULINK/SIMSCAPE program
Kachlík, Jan ; Klíma, Bohumil (referee) ; Huzlík, Rostislav (advisor)
The topic of this diploma thesis is mathematical model of electric vehicle. The traction drive consists of Li-Ion battery, free-phase DC/AC converter and permanent magnet synchronous machine. The main goal of the thesis is development of function model and making simulations in SIMULINK/SIMSCAPE program. Work is divided into three main parts. The first part is dedicated to the theoretical description of the main drive components. The second part describes partial subsystems of the model. In the last part is build a complete model of electric vehicle and simulated different driving mode.
|
|
|
Traction inverter for an electric bike
Prudík, Martin ; Klíma, Bohumil (referee) ; Vorel, Pavel (advisor)
A drive design for an electric bike with brushed DC disk motor is proposed in this thesis. Especially the design of a DC/DC converter with DSC control is described. The converter can operate as step-down and step-up too. Minimum dimensions and sufficient power for riding without human assistance were the main demands on the design.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
Inverters for lighting units with LEDs
Zuber, Zalán ; Feiler, Zdeněk (referee) ; Klíma, Bohumil (advisor)
The master‘s thesis deals with DC/DC converters for power LED diodes. Gives an overview of the field of LED lighting technology, analyzes various types of converters and shows their principle of operation. Furthermore presents some possible circuit designs for three different voltage levels and the calculations for each part. As an approval of their functionality the results of their measurements are plotted followed by the data evaluation.
|
|
|
Inverter 12V DC/230V AC
Stejskal, Jiří ; Huták, Petr (referee) ; Klíma, Bohumil (advisor)
This diploma thesis describes particular parts of power inverter such as gate driver, DSC, LC filter, low power supply, DC/DC converter and four-quadrant bridge and manner of its control by digital signal controller. Inverter is designated for generating of a mobile artificial electric grid (for example in a car).
|
|
|
Concept of linear motors measurement workplace
Knobloch, Jan ; Červinka, Dalibor (referee) ; Klíma, Bohumil (advisor)
Master’s thesis handles about measurement on linear motors. Acts about set of two linear machines on one rail. One is motor and second is load. Thesis paies their mathematical description, control and measurement. It’s made measurement of the linear motor load characteristic. Next measurement have to do with losses in the converter. Is chosen measuring instrument t for measurement during working cycle. During working cycle has determine power eciency of entire drive.
|
|
|
DSP56800 microprocessor line usage for asynchronous motor control
Kukuczka, Adam ; Huták, Petr (referee) ; Klíma, Bohumil (advisor)
Tato diplomová práce pojednává o možnostech simulace a modelování elektrických pohonů na základě Bondových grafů. Je zde uvedena základní teorie k problematice. V práci jsou představeny modely stejnosměrného a synchronního stroje sestavené touto technikou. Dále je zde seznámení s Freeware knihovnou Bondových grafů BG V2.1 k programu MATLABSimulink. Za pomocí této knihovny byly sestaveny oba modely strojů. V poslední kapitole je uvedeno srovnání modelování na základě teorie Bondových grafů s modelováním v blokových diagramech.
|
|
| |
guest ::
RSS feed.