|
|
Detached house with café
Večeřová, Gabriela ; Rebrova, Tatiana (referee) ; Kacálek, Petr (advisor)
The bachelor thesis deals with the design and processing of the project documentation of a family house with a café. The designed building is located in the quiet uptown of Trutnov. It is two-storey partially basement building with a flat green roof and a penthouse roof. Foundations of the building are concrete and reinforced concrete. Supporting, peripheral and screen walls are designed from the POROTHERM system. Where the outer housing consists of a ceramic construction and of the ETICS insulation system. Ceiling construction is designed from the POT ceramic-concete beams and from MIAKO ceramic inserts. Part of the facade is created from plaster; another part of the facade consists of a ventilated facade made of wooden prisms and Nordic pine tiles. The dominant feature is a glazed facade connecting both floors. These individual architectural elements divide the building into individual units and fit into the natural landscape. The building creates two parts, namely residential part of the house and café. In the 1st floor there is a café, a guest room with a bathroom, a garage, an entrance hall, two children's rooms with a bathroom and a hall with open space from the basement. In the 2nd floor there is a technical room, bedroom, bathroom, separate toilet, kitchen with dining room and open space to 1st floor. The floors are connected by a staircase in the open space.
|
|
|
High standard detached house
Beňo, Radoslav ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
This bachelor thesis is focused on proposition and elaboration of project documentation for construction of building an object of high-standard family house which is located in the cadastral area of municipality Dolní Lomná on a sites number 45/2 and 47/2. The project is consistent with the ground plan of the municipality. The object is partially basement building with two overground floors and a garage, which has been projected for one car. The house has been designed as one accomodation unit intended for a four-member family. Construction system in the basement and overground floors has been solved as monolithic reinforced concrete construction, concrete characteristic: C30/37, XP1, weldable reinforcing steel: S235-B500B. The project of inner disposition has been solved so that its function suits to all user´s demands.
|
|
|
Apartment building
Bošková, Katarína ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
This bachelor´s thesis is processed in the form of design documentation for implementation of building. Solved building is apartmen building in Púchov - Gorazdová ulica. Apartmen building includes five above-ground floors and one underground floor. There is ten dwelling unit in building and common spaces for residents. There are two areas for rent in ground floor. The undergroung garage for residents is located in basement of building. The highest floor is recessing on both sides and that is why there are two roof terraces. The structural system of a building is designed from clay block Porotherm 30 Profi and cast-in-place horizonat reinforced concrete constructions. Vertical loadbearing constructions in basement are from cast-in-place reinforced concrete. Building is insulated with basalt wool Isover TF Profi. Roof construction is designed as flat roof with stabilization layer of fine aggregate.
|
|
|
Apartment building
Dlouhá, Jana ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
This bachelor´s thesis deals with design and elaboration of project documentation of apartment building. The building is located on plot No. 3052/5 in Bystřice nad Pernštejnem, number of cadastre unit 616958. The apartment building have four above-ground floor and basement. Object includes eleven dwelling unit and two of them are accessible. In the basement are designed cellars, a technical room, workroom, drying room and a gym. Vertical structures are made of ceramic blocks, horizontal structures are made of cast-in-place reinforced slab. Building is insulated with contact thermal insulation system. Roof construction is designed as flat green roof.
|
|
|
High standard detached house
Štěrbová, Nikol ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
The aim of the Bachelor thesis is design documentation for construction of a new building high standard detached house. Location of building is in Brno on cadastre unit Sadová. The building is designed for living of for or five people. The building has a two floor and basement. Part of the first floor is garage for two cars.The strip foundations are made from plain concrete. Structural system is designed from clay blocks Heluz. In basement is used like structural system blocks permanent formwork Diton. Floor slab is made from reinforced concrete. The roof in designed like warm flat roof. The building envelope is designed like contact thermal insulation system ETICS.
|
|
|
Apartment building
Lisá, Nikola ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
The content of this bachelor thesis is the design of a new apartment building in the town of Nový Jičín. It is an object with three above-ground floors and a partial basement. The vertical supporting structures are designed from clay masonry, in the basement of the permanent concrete formwork. The object will be covered with a flat roof. The design documentation has been prepared according to valid legal and technical regulations.
|
|
|
Family house with an establishment
Pospíšil, Václav ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
This thesis describes the design and preparation of project documentation for construction of the building of a family house with a business plan in the Horní Kosov at a level of a project documentation for the building realization. The family house is located at parcel no. 1237/19 in administrative area of Horní Kosov. The proposal respects the local plan. The family house is conceived for families of four members.The family house is designed as a a stand - alone, two -floor, partly made cellar, with establishment for rehabilitation center. The property includes a garage for two car. The main entrance is at the level of the 1st floorlocated to north. The main rooms are oriented to the south. The building is designed with HELUZ systém, the building is based on concrete footings and covered with a flat roof. The structural system is a wall, brick. The project was preparedusing the computer program AutoCAD. When processing, the emphasis was put on the correct layout, architectural solutions, static requirements and safe use of the building.
|
|
|
High standard detached house
Krištof, Marek ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
The aim of my bachelor thesis is the design and elaboration of project documentation for the realization of a building of an high standard family house in Brno. The building is located in the cadastral area Žebětín, on parcels 1607/8 and 1607/68. The design of the building respect the municipality`s municipal plan. The object is set on a sloping terrain. The building has two above ground floors, the 1st floor is partially embedded in the terrain. In the 2nd floor there is a main entrance to the building and to the garage. The high-standard family house is designed for a four-member family.The construction system is wall-mounted, brickwork made of ceramic fittings. The roof is single-layer flat. The perimeter shell is designed as a ventilated facade with.
|
|
|
Family house with an establishment
Jelínek, Jan ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
This bachelor thesis presents a project documentation of a family house with en establishment - café. The building is situated in the city called Brtnice in a newly developed location „Na Nivě“. The house has two floors and is partly basemented. The coffee bar is only in part 1NP. Residential area includes all three floors, which are connected through a direct stairscase. The house has plain concrete bands foundation. All masonry work is done by HELUZ and BEST. The roofs are flat on reinforced concrete ceilings. The project also includes a garage for two vehicles.
|
|
|
Gallery aviation technology and traditions of aviation at the airport Medlánky in Brno
Rebrova, Tatiana ; Marek, Jiří (referee) ; Šindlar, Jiljí (advisor)
Area of the airport Medlánky is situated on the border of city districts Brno-Medlánky and Brno-Komín near the nature reserve "Medlánecké kopce". The designed gallery of aviation is a two-storey building, which consists of three parts. The main part is the exhibition space for airplanes, which is formed of a single-storey long-span hall, with the two-storey entrance part of the complex of buildings connected to it, in which are situated the area of the entrance, the training center (detached workplace of the institute of aviation FS BUT in Brno) and the administration. In the building of the original hangar, which is located along the street Turistická are located restaurants and aeroclub. Exhibition hall of the building of the gallery is formed by the structural system of the arched wooden glulam beams. The load-bearing wooden structures are visible and form the elements of the interior of the exhibition space. Two-storey extention of the entrance part of the building is structurally designed as a skeleton wooden structure. The material exception is the area of the entrance, which is made of monolithic concrete.
|
guest ::
