|
|
Apartment building
Marek, Václav ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is a new building of an apartment house in Chotěboř. The apartment building is designed from the four-storey part and from the five-storey part, the floors are finished with a residential attic. The apartment building is connected to the existing housing development, installed in a slightly sloping terrain. The apartment building contains seventeen housing units, the apartments are designed for housing four-member families, while apartments of the studio type are designed for two persons. The first floor is designed for the technical facilities of the building, there is also a commercial area that is considered for the operation of a hairdresser. Other above-ground floors consist of housing units. The apartment house is covered with a saddle seddle roof, in the part of the fifth floor there is also an outdoor terrace with a flat roof. The vertical load-bearing and non-load-bearing structures are formed by the Porotherm brick system. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The foundation structures are made of monolithic concrete and monolithic prefa. The parking space is designed outside the building, with parking for the disabled. The project was developed in the ArchiCad graphics program. All constructions comply with valid standards and regulations.
|
|
|
Leisure time centre with accomodation
Morcinková, Kateřina ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
New-building of leisure center. The building contains two stories, without basement. Structural system of building is created by Porotherm and supplemented by reinforced concrete columns. There are large entrance hall, canteen, lecture and exercise rooms in the ground level. Accommodation rooms, private apartment, laundry room and building manager’s apartment are situated in the second level of building. Roofing of the two-storey building is created by arched truss. The single-storey building is roofed by green roof.
|
|
|
Machining of the Formula hub on CNC Machining Centre
Jelínek, Petr ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
The master thesis deals with design and manufacturing of rear right formula hub on CNC machining centre by using modern CAD/CAM technologies. The theoretical part is focused on description and characterization of milling technology and machinability of aluminium alloys. The practical part is focused on the designing formula hub in CAD software Pro/Engineer, proposing machining strategies by using CAM software PowerMILL and manufacturing on CNC machine. There is technical economic evaluation of the machined part at the end of the thesis.
|
|
|
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
|
|
|
Apartment building
Medová, Jana ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This bachelor project describes design of an apartment building on the plot no. 318 in the cadastral area Přibyslav. The plot is sloped to the North. The building has three above-ground floors. It is designed as a masonry (Porotherm systém) building. The envelope is insulated with expanded polystyrene panels. Floor structures are designed as pre-stressed concrete panels. The building has flat green roof with semi-intensive vegetation.
|
|
|
New building boarding house with restaurant
Zelman, Martin ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
The subject of this thesis is the elaboration of the project documentation of a guesthouse with a restaurant located in Deštné in the Orlické Mountains. The thesis contains three parts. The first part deals with the architectural and structural design of a detached three-storey building. The first floor houses the restaurant, an entrance area for the guesthouse, and technical facilities of the building. The second and third floors are intended for accommodation and recreation of guests. The structural system is designed as a transverse wall with a longitudinal stiffening wall. The second part deals with the technology of the building environment. A wood pellet boiler is designed as the energy source for heating and hot water. A VRV system is used for space cooling. Photovoltaic panels are placed on the roof to generate electricity. The captured rainwater will be used to flush the toilets. The ventilation of the individual rooms is provided mainly by forced ventilation. The third part consists of the development of an energy study, where different combinations of the considered options are proposed, especially within the changing heat sources. For the development of different options, I use the same proposed reference building. The output of this part is an evaluation and comparison of the individual options with each other. Furthermore, selecting and incorporating the best option into the previous parts of the thesis in terms of primary energy from non-renewable heat sources and indicative operating costs.
|
|
|
Apartment Building
Borková, Sabina ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building in Litomyšl. The apartment building is located in the northwestern part of Litomyšl, in an area designated for mass housing. It is a detached three-storey house that has no basement. There are 6 residential units and each apartment unit has its own garage. On the northwest side there are 12 parking spaces. The vertical construction system is made of ceramic blocks. The building is insulated by a contact insulation system ETICS made of mineral wool. Horizontal structures are made of ceiling panels filigran SPF 6 thickness of 250 mm. The balcony slabs are made of a monolithic slab with a thickness of 150 mm brought out by ISO – beams. Movement between the individual floors is ensured in the building by means of a monolithic reinforced concrete staircase and an elevator. The walls around the elevator shaft are made of lost formwork. Due to unfavorable foundation conditions, the building is based on a reinforced concrete foundation slab, which is made under the entire ground plan of the building. Above this plate there is a free space called "crawl space". Above that space there is a reinforced concrete slab, which forms the supporting layer of the floor on the ground floor. The roof of the apartment building is single-walled, vegetative. The design itself is carried out according to the permissible regulations in this locality. Part of the bachelor thesis is the management of the technical equipment of the buildings of the distribution in the building and the assessment of building physics (thermal technology, acoustics and lighting). The following programs were used for the elaboration of the project documentation: AutoCAD 2021, ArchiCAD 23, Building Designe, Hluk +, DEKSOFT, Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Adobe Acrobat
|
|
|
Detached house
Hort, Martin ; Kvapilová, Vendula (referee) ; Jelínek, Petr (advisor)
The bachelor thesis has been solving a design of a detached house in Naměšt´ nad Oslavou of Třebíč district. The detached house has been designed as a two-floor house, partly cellared with a flat roof. The projet was created with the main aim of creating a permanent living for a four- member family. A garage is a part of the project too. Perimeter walls of the basement are made of concrete blocks poured by concrete and for perimetric walls of the elevated floor were used Porotherm brick blocks stuffed with mineral isolation. A monolitic ceiling construction is combination of iron and concrete.A lot is located on a southern subtle slope. A part of the project is a technical evaluation, fire emergency measures, other calculations and outcome of building physics. The thesis is elaborated in the form of implementing project, a drawing and documentary part is included.
|
|
|
Barevný svět kindergarten
Žižková, Martina ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The objective of the diploma thesis is to prepare a study of a kindergarten. The kindergarten is designed for 72 children and is located on the lot n. 899/2 in Brno, district Zebetin. The house is a single storey, free-standing with no basement. The entrance and access road is located on the north side of the property. The adjacent terrain is gently sloping. The supporting construction is designed from the Porotherm system. The building is covered with a flat roof. The operation consists of three departments, facilities for teachers, communication facilities and technical background.
|
|
|
Cost estimating of the construction as a basis for determining the bid price
Jelínek, Petr ; Roudná, Veronika (referee) ; Tichá, Alena (advisor)
This batchelor´s thesis is focused on calculations of construction orders. This work is dividend into theoretical and practical parts. Theoretical part describes basic terminology and processes related with calculations of construction orders. Practical part focuses on specific construction and is analysing its parts and comparing prices of realization and calculation program. The construction is two-story family house situated in the town of Městečko Trnávka.
|
guest ::
