|
|
Analysis of dynamic load from induction machine current signature
Pavláček, Jan ; Ondrůšek, Čestmír (referee) ; Huzlík, Rostislav (advisor)
This thesis focuses on the analysis of the dynamic behavior of the load from the measurement of stator currents of induction motor. Work is sorted from basic engine failures equations, mathematical models, types of signal processing, simulation and measurement. The practical part deals with the design of the motor model in Matlab Simulink, the simulated and the measurement of the pump BETA 12 YC On the Department of Fluid Engineering Victor Kaplan. Use appropriate types of signal processing evaluate the results. The aim of this work is to analyze the dynamic changes of the load.
|
|
|
Machine diagnostics based on models
Kapusta, Juraj ; Habán, Vladimír (referee) ; Huzlík, Rostislav (advisor)
The main idea is focused on the diagnostics of a specific hydraulic system, i.e. sensing the physical quantities of the hydraulic circuit with a tank and a centrifugal pump driven by an asynchronous motor. It is a system of pipes connected to the pump, where due to its work it creates a water flow and a pressure increase. In practice, this issue is also addressed in the energy and nuclear industries. Primary circuits in some cases cannot be designed or modified to be able measure locally the pressure value. It is necessary to measure this quantity indirectly - from the motor currents. The main idea of the work is to diagnose the system by an indirect method - specifically to detect the state of the hydraulic circuit (pressure, flow) from the values that we are able to measure and detect damage in advance. In the second part of the thesis is the application of the parts of a specific hydraulic system in the simulation environment MATLAB Simulink. The model of the hydraulic circuit contains mathematical-physical relations that simulate the course of the mentioned experiment. The results of the simulation are compared with the results of the experiment. The model also investigates the simulation of a fault condition, when we supply pressure pulsations to the hydraulic circuit. It is these changes in the hydraulic part that affect the characteristics of the pump and the asynchronous motor, so we are able to diagnose this system.
|
|
|
Innovation of load test stand for electric drives
Martinek, Jan ; Marada, Tomáš (referee) ; Huzlík, Rostislav (advisor)
The theses presented proposes an innovation of load test stand for electric drives. It begins with a general overview of load test stand types, their manufacturers and measurement methods in load and no-load situations. Next part analyses current circuit diagram of the load test stand and its risks. This is followed by a proposal for innovation of the circuit diagram which is divided into electrical and control part using current load test stand and its mechanical parts. A wiring diagram is created, the control part is processed by the Logosoft program. The design is evaluated from the safety point of view and modified to meet applicable technical standards.
|
|
|
Machine vision for locating objects
Hasík, Dávid ; Huzlík, Rostislav (referee) ; Vetiška, Jan (advisor)
The bachelor’s thesis deals with design of machine vision system for object localization and its application possibilities. Design approach, its components and their individual advantages and disadvantages for this type of machine vision system are described. This thesis also includes simple model of machine vision system for object localization using regular PC. For image processing is used Vision Assistant and its tools. Two scripts are made in this software and their performance is compared.
|
|
|
Utilization of MERS in heavy current engineering
Vetiška, Vojtěch ; Procházka, Petr (referee) ; Huzlík, Rostislav (advisor)
This graduation thesis is aimed in usage of MERS circuits in high-current electroengineering. The MERS circuit is a serial variable capacitor which capacity is possible to change by the help of switching of semiconductor components. On beginning of the thesis I shall acquaint you with usage of the MERS circuit. It will be sketched out their basic circuitry, the operating method, possibilities of transistors switching and calculation of the capacity capacitors for particular controlling method. On the prepared device we shall accomplish the predefined measurement. Furthermore we shall create the simulation by means of the Matlab programme. In the end we shall compare the results of the simulation with measured values.
|
|
|
Dynamic simulation of DC motor using FEM
Gottwald, Michal ; Huzlík, Rostislav (referee) ; Vítek, Ondřej (advisor)
My diploma thesis deals with a specific dynamic model of DC motor with the parameters obtained from the calculation and from the program using the finite element method. It shows how much accurate results can be achieved in the model, if you use only the values which can be measured, recorded and calculated on the engine. This thesis contens three parts. First part describes the structure and function of DC motor and the basic principle and the use of FEM. Next is calculation analytical and numerical parameters. The search parameters include torque, resistance and inductance of armature winding, resistance and inductance of excitation windings. The last part is dedicated to creating a dynamic model. Results from the dynamic model and measured values are compared in the conclusion of my thesis.
|
|
|
Measurement of induction machines
Sporni, Peter ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
This work dissert about problematics of induction engines, which are the most used types of electrical drives used in present time. At the beginning we will explain their construction and its influence to the characteristics of the engine and possibilities of their regulation. In the next part we will describe some basic types of measurments implemented on these engines. To verify the theory which was described in this work we will discuss measurments realized on concrete types of engines. At the end we will calculate the main dimensions for one of the measured engine.
|
|
| |
|
| |
|
|
Simulation of short circuit tests in a short-circuit laboratory
Vykoukal, Tomáš ; Valenta, Jiří (referee) ; Huzlík, Rostislav (advisor)
The task of this bachelor thesis was to create a short-circuit simulation test room. This short-circuit simulation test room is part of UVEE. Short-circuit test room is a complex device, which contains several types of electric machines and equipments involved in one circuit. We got to know with the involvement of short-circuit test room. And we conducted a simple simulation in Matlab toolbox Simscape Power Systems.
|
guest ::
