|
|
Computer controled inteligent elements of electrical instalation
Kolář, Milan ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
This bachelor thesis deals with the field of intelligent wiring. In the first part, there is an explanation of how the inteligent wiring works, its main parts, topology and categorization. In the second part, there is an example of practical application which is built on the elements of the INELS system. There is also a comparison with the classic (conventional) wiring. It is followed by programming and setting up of the wiring with the included software IDM. Finally, there is an example of visualization, a possibility of remote control and function management with a data net.
|
|
|
Properties of the physical layer of ZigBee
Humpolík, Tomáš ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
The ZigBee standart works on using physical and data link layer of IEEE 802.15.4 standart. Three bands were defined (2.4GHz, 915MHz and 868MHz). There was also number of physical layers defined, each of them using one of the three bands and number of modulation and spreading functions. This thesis is focused first of all on specification 2,4GHz physical layer, which is world-wide used because this band can be used (with observace of the local rules) without license. Thesis is in its first part focused on modulation function, as well on used spreading functions and number of channels for each physical layer. In the second part is paid attention to demonstration kit by ATMEL Corporation, which enables associate a simple network in star topology and using the network for demonstration of simple functions of associated devices, and kit by Radiocrafts corporation, which is used in laboratory work. Laboratory work is focused on characteristics measurement during data transfer.
|
|
|
Design of the user-friendly touch screen GUI and a physical connection to an existing simulation hardware device
Husar, Jan ; Kaczmarczyk, Václav (referee) ; Štohl, Radek (advisor)
Práce uvádí základní informace o průmyslové sběrnici AS-Interface a popisuje její funkce. Dále se zabývá rozšířením stávajícího FTZ AS-Interface Slave Simulátoru o dotykový display, který značně usnadní ovládání tohoto simulačního nástroje. Je zde nastíněn návrh a řešení uživatelského dotykového rozhraní k tomuto simulátoru s použitím Amulet LCD modulu STK 480272C. Vývoj tohoto rozhraní je proveden pomocí GEMstudia, softwaru firmy Amulet Technologies a grafických programů. Dále tato studie pojednává o softwarové úpravě FTZ AS-i Slave Smilulátoru. Jedná se o úpravu řídícího FPGA v jazyce VHDL zajišťující komunikaci s dotykovým displejem. Poslední kapitola se týká problematiky spojené s návrhem uživatelsky přívětivé aplikace.
|
|
|
Software design for mapping of the network topology
Janura, Dominik ; Novotný, Bohumil (referee) ; Sobek, Jiří (advisor)
This thesis addresses the issues of network topology mapping, where the network consists of multiple Cisco devices. It includes theoretical knowledge in this field and closely describes possible solutions to this problem. It explains the process of design and implementation of this kind of network mapping software by chosen means. Correct function of the created application is tested on a virtual network.
|
|
|
Power line channel simulator
Jedlička, Tomáš ; Fujdiak, Radek (referee) ; Mlýnek, Petr (advisor)
The master’s thesis is focused on the analysis and modeling of power line communication with aim to implement power line channel simulator in the programming environment Matlab. At the beginning of the thesis are summarized basic information about the PLC communication, its basic distribution in terms of frequency bands and are also mentioned advantages and disadvantages. The emphasis on the meaning and importance of modeling with the aim to analyze PLC communication channel is specified further. The following is a detailed description of the current power lines communication models. Power line channel simulator was created on the basis of mathematical analysis for low-voltage (LV) distribution networks. The created simulator uses a model of cascaded two-ports and works in random or fixed mode. Input parameters are real topologies, different types of loads and cables. RLC resonant circuit as a frequency selective impedance is also included in impedance models. Based on the obtained results was performed the analysis, determined the critical parameters and extreme values. Comparison of effectiveness of created simulator was processed on the basis of available simulators from other authors. Two versions of simulator were created using the results obtained under comparison of effectiveness. For comparison was also performed real measurement on a simple topology. The experimental measurements results have been implemented in the simulator.
|
|
|
Power line transfer function generator
Šenk, Marek ; Mišurec, Jiří (referee) ; Mlýnek, Petr (advisor)
The aim of this thesis is to create a power line transfer function generator in Matlab. Work on introduction explains the concept of power line and describes the different types of topologies and types of cables that power line are the most widely used today. It is also discussed PLC technology, its structure, characteristics of the transmission channel and interferences. The following are approach the types of the modeling of power line. More details are described generally modeling in the frequency (two-port network model), which is used in the created generator. The next section provides a power line model, whose principle is used in the generator. The following is a description of created the generator and comparison with FTW PLC Simulator. In conclusion, the thesis presents the results of simulations the transfer function, which show the magnitude and phase frequency characteristics of different topologies and parameters.
|
|
|
Lighting control system using a wireless communication network
Levek, Vladimír ; Kadlec, Jaroslav (referee) ; Kuchta, Radek (advisor)
The aim of this thesis is to create and describe the wireless system for lighting control. A part of the work is the creation of modules for switching lighting and the creation of their operating programs. The first chapter briefly describes the way how the lighting control works and contains general requirements for the intelligent home. Further, there is a description of IQRF system, which serves as a wireless platform for the system. Next part of the thesis describes individual modules in terms of hardware and software. One part of the work covers the description of the transmission protocol. The attachment includes a listing of all operating programs for this wireless control system.
|
|
|
Topological and Attribute Revision of Digital Maps
Sadloňová, Silvia ; Sedláček, Svatopluk (referee) ; Ježek, Jiří (advisor)
The topic of this bachellor´s work is the attribute and topological revision of a digital map. In the work I have described geodetic software’s in which the revising is made with detailed description of functions for the attribute and topological revising of a digital map. I have applied these functions on particular data, and consequently I have created a pattern drawing of topological errors and a prescription of attribute revising of elements. The object of this work is the description of software’s works and functions for topological and attribute revising of a digital map and evaluation of these software´s achievements.
|
|
|
Meta-analysis of methodological artifacts of the phylogenetic imbalance.
SMRČKOVÁ, Jana
The influence of possible methodological artifacts (e.g. type of data or tree construction methods) on the tree topology was evaluated. A total of 413 phylogenetic trees was downloaded from the tree repository TreeBASE. Three indices of topology imbalance were employed, namely, Fusco & Cronk index, weighted average, and Colless index. The study reveals that methodological artifacts have probably a weak influence on the tree shape. Therefore, patterns in tree balance could reflect macroevolutionary processess, not a methodological bias.
|
|
| |
guest ::
