|
|
Latex Modified Cement Composites
Kunc, Michal ; Rovnaníková, Pavla (referee) ; Kuřitka, Ivo (referee) ; Havlica, Jaromír (advisor)
The subject of dissertation is a study of physic-mechanical properties and development of self-leveling polymer-cement composite of the ternary binder system PC-CAC-CS modified with chemical additives and polymeric substances. The dissertation systematically describes a four-step optimalization of the composite considering its key properties. Experimental part has been focused on monitoring the impact of composite components on selected final properties. Basic physico-mechanical, structural properties and its relations (compressive strength, porosity, flow abilities, setting times) have been analyzed for deeper understanding of the effects of individual composite components. Methods which quantify the existence of the newly formed hydration product – ettringite (XRD, SEM with EDS, calorimetry, dilatometry) has been chosen as additional study methods on selected combinations. A working prototype of self-leveling polymer-cement composite was successfully developed based on systematic process and using of testing procedures and measuring methods.
|
|
|
Use of controlled gassing of Al-Si alloys during die casting
Jankes, Erik ; Kaňa, Václav (referee) ; Roučka, Jaromír (advisor)
This master thesis will cover the possibility of using directed gassing of Al-Si alloys in a high pressure die casting foundry. As a control gas, rotary degasser with gaseous 20 % H2 in N2 as a medium was used. Castings were casted via high pressure die casting machine. The aim of this research is to compare internal defect such as porosity or shrinkage of a casts made from degassed and control gassed melt.
|
|
|
Production technology of plastic bracket bearings motor
Svoboda, Vladimír ; Odehnal, Petr (referee) ; Kandus, Bohumil (advisor)
The target of this dissertation is based on the specified shape of plastic part to develop search technology of plastic injection molds, to the technological design process and construction of injection molds, including the necessary calculations. The project includes a search and a practical sections. Based on information from a search section a suitable material was chosen, which became the basis for practical section. The practical section with basic technology calculation is complemented by filling simulation analysis and stress analysis of critical elements. A part of this dissertation is the set of the drawings.
|
|
|
Production technology of mobile phone plastic cover
Heralt, Aleš ; Orel, Daniel (referee) ; Kandus, Bohumil (advisor)
The master´s thesis is focused on technology of injection plastics. The specified part is guard cover of mobile phone. The first part of thesis is focused on description of technology with priority on construction of form. The second part of thesis includes calculations of parameters, which are needed for production, along with techno-economic evaluation of selected construction design.
|
|
|
Effect of curing conditions on the properties of alkali activated slag
Rypák, Peter ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
Combination of fine ground granulated slag with proper alkaline activator gives alkali-activated slag – a material with remarkable properties. Theoretical part of the thesis deals with summarizing basic informations about alkali-activated slag, its properties, production and utilization. It also follows research devoted to effects of curing of alkali activated slag and shrinkage-reducing admixtures on its properties. Objective of the experimental part is to determine the influence of curing conditions on the mechanical properties and microstructure of alkali-activated slag. These properties are also monitored in alkali-activated slag with carbon nanotubes and hydroxypropylmethylcellulose as an shrinkage-reducing admixtures.
|
|
|
Load-bearing reinforced concrete construction
Klajba, Daniel ; Hasala, Ivo (referee) ; Šulák, Pavel (advisor)
The aim of diploma thesis is to design monolithic reinforced concrete underground structure, which is partly under existing building and partly will form the basis of a new outbuilding. Structure is designed as white tub, whitout any additional isolations against water a ground humidity. All structure elements (slabs, walls, beams) was designed according to standard ČSN EN 1992-1-1 for ultimate and serviceability limit state. Structural analysis was performed using Scia Engineer 2013 – Student version. The results were validated by simplyfied manual method.
|
|
|
Design of steel-concrete composite structure of road bridge in Trenčín
Doležal, Tomáš ; Marván, David (referee) ; Nečesal, Petr (advisor)
The aim of diploma thesis was to design alternative of composite road bridge in Trenčín. The bridge beam is designed as continuous with theoretical span of 65 m + 106 m + 65 m. Permanent load, climatic load (uniform and nonuniform temperature variation, windload), shrinkage, differential settlement and traffic load were taken into consideration according to Eurocodes. Technical report, static report, drawings, bill of quantities are included. Computational model for evaluation of internal forces was carried out in SCIA Engineer software.
|
|
|
Numerical analysis of selected silicate based composites shrinkage
Drbušková, Magdaléna ; Vlk, Zbyněk (referee) ; Keršner, Zbyněk (advisor)
The thesis is divided into two main parts. In the first theoretical part is described the problems of shrinking including a comparison of Czech standard and Model Code 2010, Vol. 1. The second practical part of the master`s thesis is focused on the numerical analysis shrinkage primarily on the initial stage of this process. The experimentally obtained data are set approximations of the relative deformation using ShrCeC. Subsequently the numerical simulation of shrinkage of selected silicate specimens using a computer applications SpatiDist and FyDiK 2D. The real test specimens are modelled as two-component composite consisting of cement paste and aggregates. The result is a parametric study takes into account the influence of type and size of grain aggregate.
|
|
|
The research of cause of failure of concrete elements Face Block
Eger, Lukáš ; Husařík, Petr (referee) ; Dufka, Amos (advisor)
This master thesis focus on the analysis of effects that cause defects in concrete blocks. Experiences show that the defect of the blocks are often manifested in the form of cracks. Great rate of occurrence of defects is attributed to volume changes of poor quality concrete filler. The aim of this master thesis is to analyze the finding from the practical use and exploration of the requirements for the actual blocks and especially the concrete filler which is used to make monolithic structures built from these blocks. The attention will be paid to the interaction between the block and the concrete filler. Here we focus mainly on the volume changes caused by a change of moisture level and especially the cyclic moisture.
|
|
|
Physical Discretization Modelling of Shrinkage
Bedáň, Jan ; Keršner, Zbyněk (referee) ; Frantík, Petr (advisor)
The aim of this thesis is design and programming of a numerical model of shrinkage of cement composites using physical discretization and solved by parallel processing. Introduction is about the shrinkage of cement composites and explanation of terms, which are included in this thesis. The main part deals with programming of the output model, the procedure of its creation and the results of simulations.
|
guest ::
