|
| |
|
|
Annex of the parish office and the community building toward the church in Brno-Líšeň
Kosařová, Pavla ; Myslín,, Jiří (referee) ; Brukner, Bohuslav (advisor)
The final thesis is focused on the annex of complex of mixed-use buildings toward the church in Brno-Lisen. A pair of buildings consists of a one-storey Building a community of Salesians and two-storey building with parish office. The group of buildings is located on the southern slope in the housing estate of a block of flats from the 80s. Objects vertically copy a curve of the slope and is increasing to the dominant church building. Block of buildings are adjacent by shorter side to the church building and form a small enclosed courtyard inside. The buildings are designed at brick ceramic blocks, buildings are withnout cellar, with flat green roof. Living rooms are located on the southern facade, the north is reserved for corridors. The entrance to the courtyard is connected to the existing service road. Pedestrian approach builds on the existing surrounding landscaping.
|
|
|
Mixed-use Building
Vlado, Roman ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Annotation The aim of the thesis is new-building design of mixed-use building in cadastral of community Nové Mesto nad Váhom. Building is situated at free estate in the marginal of community. Building estate must have new feeder road built. In front of building will be the parking area. The mixed-use building is detached and four-storied building. At basement is situated underground garage for ten cars and store houses for flats. At first floor is situated cafe and commercial space. Cafe has kitchen, stock rooms and WC. Commercial space has staff facilities and sales area. One of the shops has back door to stock room. Parking space for staff is next to building. At second and third floor is situated eight flats. Four flats has 3 rooms and four left has 2 rooms. Each flat has got stock room, WC and bathroom. In each flat is situated entrance to the terrace. Terrace is on extensive green roof orientated to southwest. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. Area with flats has a lift. Concrete foundations are on micropiles. Project is set up with system LIVETHERM building has heat cladding. At the building are plastic windows and colour is matching with facade. Foothpath around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.
|
|
|
Mixed-use Building in Plzeň
Bureš, Jiří ; Dohnal, Jakub (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deal with a new mixed-use building in the Pilsen, district the Černice. The object is situated in cadastre unit Černice, on the plot number 1457/22 and 1456/10. Plot is undeveloped on this time and there is only grass vegetation there. Developer wants to build the mixed-use object on his plot. The object has eight flats, the office space, two shops and ample premisses for parking space The buildings is designed like a three-storey building with warm flat roof, without cellar, the structural system is wall system.
|
|
|
Mixed-use building in Bruntál
Ondrušková, Veronika ; Šteffek, Libor (referee) ; Brzoň, Roman (advisor)
This diploma thesis deals with design documentation of New mixed-use building in Bruntál. The building is located in the centre of the Bruntál on the plot number 83/1. Regulatory plan defines this plot for construction. It is marked as SC – mixed-use residental plot. The building contains the main conditions of use – living, shopping, restaurant and administration. The building has 3 above-ground floors and 1 basement. At ground floor there is café and shop. At first floor there are offices and conference room. At second floor there are flats. In basement there is utility room, cellars, garage and storages. The café and shop is separated and has its own entrances. Horizontal and vertical load-bearing and non-load bearing structures are bulit of permanent formwork VELOX – perimeter load-bearing walls are sandwiches, internal load-bearing walls are of cast-in-place reinforced concrete, which is covered by permanent formwork. Non-load bearing walls are bulit of 2 boards of permanent formwork with inserted acoustic insulation. Vertical load-bearing structures are made of cast-in-place reinforced concrete, which is covered by permanent formwork. The building has concrete foundation strips and cast-in-place reinforced concrete stairs. The roof has got classical order of layers.
|
|
|
Multifunctional house Lignum
Jakubčánin, Marek ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
|
|
|
Multifunctional building
Fátor, Martin ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
This final thesis concerns the new building of mixed-use building in Hořice. It has one floor partly below ground level and three floors above ground. There are garages for residential area, warehouse and boiler room in 1PP. There are offices and their base in the 1st and 2nd floor. There are 4 residental units in the 3rd floor. The building is designed in a shape of a rectangle. The roof is flat. There is the contact thermal insulation. There is designed gas boiler for heating. The supporting structure of the ceiling is monolithic concrete slab.
|
|
|
Multifunctional Building
Černý, Karel ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This diploma thesis deals with construction of new mixed-used building in Brno at Terezy Novákové street. The relevant estate lies on building plot number 49, which is purposed as building ground. There are existing buidings at relevant estate which will be removed. When the proposition for the building was being drafted, an extra focus was placed on use of public zone of building. The proposed capacity of building consists of 21 living units with its own internal and external parking places. The mixed-used building has five floors, there are one underground floor and four above-ground floors. There are parking zone and technical background of the building in the undergound floor. The first above-ground floor is used for commercial purposes with its own parking zone. Others above-ground floors are used for living purposses. Living area and public area are separated.
|
|
|
Heating of the Multifunctional Building
Konečný, Ladislav ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This diploma thesis proposes the heating system and ventilation in mixed-use building. The building is located in Uherské Hradiště. The object of this work is the selection of appropriate variants of two heat sources (gas boilers and solid fuel boiler). The project is focus on design of the heating system chosen mode of heating, which are gas boilers and the concept of forced ventilation. The theoretical part is focused on the regulation.
|
|
|
Multifunctional building
Tkadlec, Martin ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
This final thesis concerns the new building of mixed-use building in Zlin. It has two floors partly below ground level and two floors above ground. There are garages, cellar boxes and nonresidential spaces. There are offices and their hinterland and one flat in the 2nd floor. There are residental units in the 3rd and 4th floor. The building is designed in irregular shape. The roof is flat. There is the contact thermal insulation. There are designed gas boilers for heating. The supporting structure of the ceiling is monolithic concrete slab.
|
guest ::
