|
|
Detached family house, Křtěnov
Jílková, Kateřina ; Novotný, Miloslav (referee) ; Müller, Jan (advisor)
This thesis deals with the design of detached house. The building is situated on a slightly terrain in cadastre unit of Křtěnov. Family house is T-shape and is a two-floor building without basement. The house is design for a family of four. External walls are constructed from ceramic blocks Porotherm and insulated by contact thermal insulation system. Ceiling are designed as a cast-in-place reinforced slabs. The house is roofed with gable roof with a sloupe 35 degrees.
|
|
|
High standard detached house
Krištof, Marek ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
The aim of my bachelor thesis is the design and elaboration of project documentation for the realization of a building of an high standard family house in Brno. The building is located in the cadastral area Žebětín, on parcels 1607/8 and 1607/68. The design of the building respect the municipality`s municipal plan. The object is set on a sloping terrain. The building has two above ground floors, the 1st floor is partially embedded in the terrain. In the 2nd floor there is a main entrance to the building and to the garage. The high-standard family house is designed for a four-member family.The construction system is wall-mounted, brickwork made of ceramic fittings. The roof is single-layer flat. The perimeter shell is designed as a ventilated facade with.
|
|
|
Multifunctional Building Brno
Kotoulková, Leona ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Sobotka, Jindřich (advisor)
This work contains technical drawings, architectural design and architectural detail of the Multifunctional house in Brno, Líšeň district. Basis for this design was taken from my student work of 6. semester. The design is mainly inspired by construction system - module frame container system by Intecom company. The intent is to make the best use of the profile of the terrain, which descends steeply. The building also responds to surrounding prefab developement and to the Novolíšeňská road, which stands for one of the busiest in Brno. The acces to the plot is situated on the opposite side from the road. This driveway is separated from the ascending main road by the supporting wall. A few parking places are situated there. There is also a bus stop in near vicinity, thanks to which is possible to reduce automobile transportation. The building is divided into three blocks. Main two with flats and third, ground-floor, between them serves as a pastry shop. These two main blocks are identical and each of them is axially symmetrical. Each block has four floors, three above and one under ground. A block contains four maisonette flats, four garages, two offices of individual use and shared middle connecting part. The middle connecting part is inspired by a greenhouse. The pavement here is reduced and mostly replaced by grassed floor, which can be used for growing plants. This whole part is sheltered by semipermeable fiberglass. The front-side of the building is covered by light facade Polycon, which also covers the whole front slanted part of the roof. The rest of the building is covered by galvanized trapezoid sheet of tin.
|
|
|
Multifunctional Building Brno
Sobotková, Monika ; Manová, Ludmila (referee) ; Menšíková, Naděžda (advisor) ; Šuhajda, Karel (advisor)
The aim of the Bachelor thesis is design of mixed-use building in Brno. It is terraced house in the district of Brno-Líšeň on the parcel between Novolíšeňská street and Josefy Fiamonové street. Building has mostly housing function and there is also cafe and fitness centre. Desing of the building is based on the sloping terrain and construction system. Overground part of the building consists of containers from firm Intecon, underground part is designed from reinforced concrete. Object has three main mass and they copy the terrain in floor plan (object is open to south around contour line) and also in section, only lowest part protrude from the slope like console. In the north part of building is placed cafe, fitness centre and entrance into the stacket parking and it schields housing part from the busy road (Novolíšeňská street) and it is open to quiet south, where are flat‘s and cafe‘s terraces and they have a great view of Brno. Space between three main parts is filled with a stacket parking in the north and in the lowest floor there are places for all residents. Facade combines white, grey and black color. White render signs housing part, grey render signs part of services and because of using diverse windows in the north part, there is a black facade, perforated continuously according to interior lithing needs and it unite the north facade. On the side facades there are square windows in diferent sizes and there are also container constructions shown ahead of the surface and it gives some system to the facade. Southern facade is mostly glazed and in the lowest floor there are vertical windows.
|
|
|
Sport-hotel Frýdlant
Bartoš, Jan ; Svoboda,, Petr (referee) ; Müller, Jan (advisor)
In my thesis I will deal with the draft project documentation for sport hotel. This object is located in the quiet southeastern part of Frydlant with city views and easy access to the nearby sports facilities. It is an object of part two storey and a basement. The building is set into the sloping terrain, so the underground floor extends on to the ground. The building is based on foundation walls and footings that are made of reinforced concrete. Load-bearing walls of the underground floors are designed as reinforced concrete. Ceiling structure of the building is made as reinforced concrete beam ceiling and in other structure parts as a crosswise reinforced concrete plate. Perimeter bearing walls and two floors, are designed from the acoustic sand-lime bricks Silk. External walls are warmed by a contact insulation system. Flat single shell roof was chosen over part of the restaurant. Double-layer roof with a supporting truss structures above the main part of the building. The building is divided into functional parts. Accommodation capacities are mostly on the second floor. On the ground floor there is a restaurant with a kitchen and space for staff. In the basement there is a functional part of the wellness and gym with common dressing rooms. The only entrance path allows convenient control of customers. The building is wheelchair accessible.
|
|
|
Energy efficient mountain chalet
Hartman, František ; Vlach, František (referee) ; Bečkovský, David (advisor)
This diploma thesis deals with project energy efficient mountain chalet. The building is located in the Krkonoše national park, near by highest Czech mountain named Sněžka. Object is located on plot number 899 in the cadastral Pec pod Sněžkou, on the site of the initial ,,Giant” chalet. The aim of this thesis is proposal of energy efficient mountain chalet in extreme climate conditions, such as in the mountain area, at the elevation 1378 m. Proposal of the chalet emphasis is on achieving maximum energy self-sufficiency. The building consists of two objects SO 01 and SO 02 interconnected by the roof. The total built-up area is 191.39 square meters. The accommodation capacity is 20 people.
|
|
|
Newly-Built Detached House in Oslavice
Pospíšilová, Iveta ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is a design of a new building for a family house in Oslavice and a processing of a project documentation for the realization of the building. The building is designed for purposes of family living and it is situated on the periphery in the east part of the village Oslavice. This part of the village is sparsely developed with family houses. The architectonical solution is designed with consideration of the building location and character of the surrounding housing development. The family house is designed as a one-family detached house intended for four- or five-member family. It is situated in a sloping terrain and it is designed as a partially basement. The designed building has two storeys above ground and a basement. On the first storey above ground there is a daily social zone, on the second storey above ground there is a quiet zone and in the basement there is a technical facility of the building. A part of the family house is a garage for deposition of one personal car. A part of the basement is placed ahead of the front entrance into the building and it is visually separated by using of wood exterior panelling. Roofing of the family house is solved by hipped truss roof and above the garage there is designed flat roof by which it is created a terrace accessible from the second storey above ground.
|
|
|
Family house on suburbs
Nosek, Tomáš ; Pospíšil, Jaroslav (referee) ; Šuhajdová, Eva (advisor)
The aim of the thesis "Family house on the outskirts of the city" is the preparation of detailed documentation to build a house on land č.194 / 3, in Stračov. It is necessary to integrate the building into the surrounding buildings and it appropriately fitted into the sloping terrain. The house will always start with half a floor shift. This will follow the ideal terrain. The roof of the building will consist of two independent gabled roofs. The support will consist of ceramic bricks HELUZ. Insulated with contact insulation system. The facade colour will be off white and gray. Non-bearing part will consist of HELUZ ground system. The roof will have a concrete roofing BESK. Doors and windows are plastic Windeck color anthracite.
|
|
|
Multifunctional house
Moravec, Pavel ; Javůrek, Tomáš (referee) ; Brukner, Bohuslav (advisor)
Specified bachelor thesis deals with an insulated newly built family house for four to five-member family with added polyfunctionally in the form of project office. Proposed construction is situated in the developable area of peripheral town part of Pelhřimov, southeast part of the town on the land number 2050/174. The proposed new building facility of a family house is a two-storey building consisting two rectangles inset into each other and with a double garage. The object is set into the sloping terrain so that the main entrance to the family house is in the level of the second aboveground floor where there is an entrance hall with utility room, a garage and relaxation, quiet and night zone located. From the level of the second aboveground floor it is possible to descend into the ground of the first aboveground. The ground floor serves as a space of residential area and daily and active space. In the level of the first aboveground floor there is the multifunctional part (project office) situated. It has separate entrance from the level of the first aboveground floor. The object is based on foundation walls and the spreading concrete slab on which the structural system walled of ceramic blocks will be based. The circuit construction will be complemented by contact insulation system ETIC made of breathable grey polystyrene. The ceilings are ferroconcrete and monolithic. There is a single-flat roofing with river-washed stones. The part of the thesis is the assessment of the object from the viewpoint of the thermal properties and processing of the solutions to fire safety construction.
|
|
|
Detached house with a design office
Králík, Robert ; Majsniar, Michal (referee) ; Kolář, Radim (advisor)
This bachelor thesis focuses on the construction of a new family house with the inclusion of an office and a garage. This home is designed for a family of four with two cars housed in a spacious garage. The house will stand on a sloping field in Domasov near Brno on the New Street. The main entrance to the building is from the street to the northwest. Layout of the building is situated so that the residential and day rooms are on the side with more sunlight. Construction will have a square layout, partial basement with a gabled roof and a terrace. It will have a basement and two floors with residential attic. The vertical constructions will be made of shuttering blocks in the basement cellar, above-ground portion will be made of the ceramic block. Horizontal construction are made of ceramic-concrete ceiling beams and brick inserts. The truss will be wooden, purlin construction with a ridge runs. This work includes documentation and drawing parts and is compiled as an implementation project.
|
guest ::
