|
|
Software Car Wash model
Zborovský, Vojtěch ; Jirgl, Miroslav (referee) ; Štohl, Radek (advisor)
This bachelor thesis is focused on portal car wash lines and associated processes, control systems, SCADA control systems and visualization, communication between master PLC and SCADA system. The thesis contains research concerning this topic, laboratory example design and its realization. Reader will become acquainted with SCADA systems and ControlWeb which also belongs to the SCADA systems group. Detailed description of the designed program along with its features, control design using PLC and virtual model of the car wash line controlled by the PLC is also to be found in this work. Both of these two parts have been developed using ControlWeb. Regarding the complexity, the laboratory example was designed only as a demonstration, which differs from a real life solution. All the operations associated with the model are represented only as memory entries inside the PLC, no physical input output operations have been performed here. However, the designed control program is ready to be used in real physical model, the financial side would be significant.
|
|
|
Monitoring of test station downtime
Šebesta, David ; Dzurenda, Petr (referee) ; Malina, Lukáš (advisor)
This thesis is about the monitoring of testing station downtimes at the DS/ETC (Diesel Systems / Engineering Testing Center) Bosh Diesel s.r.o. department in Jihlava. The goal of the monitoring is to get a record and an immediate warning for each machine downtime. The testing engineers are able to edit downtime reports and to create statistics and the Pareto analysis based on the reports. In the beginning of the thesis there are generally described the ETC department and the SCADA system. The monitoring system is designed and implemented based on the requirements of the ETC department. SMS messages sent via a GSM module what is connected directly to the server are used for immediate downtime warning. The test engineers have the graphic user interface what they can use to edit downtime reports. Statistics are generated individually based on the adjustable data filter. The department can focus primary on the finding out the reasons of the downtimes what leads to the biggest reduction of the test machine downtimes.
|
|
| |
|
|
Medium voltage substation automation using control system COM600 and standard IEC61850
Havelka, Tomáš ; Štaffa, Jan (referee) ; Háze, Jiří (advisor)
This work deals with problematic of standard IEC61850, mainly with chapter IEC 61850-9-2 LE which is commonly known as Process bus communication. There are described advanced tools of the control system COM600 with detail description of their configuration in this work. It also deals with configuration of IEC 61850-9-2 LE with Relion family protection relays and its implementation to the control system COM600. The main aim of this work is focused on configuration of IEC 61850-9-2 standard with protection relays, configuration and detail description of COM600 advanced tools, description of Logic processor, further custom design and appliaction configuration global reset of Logic procesor in control system COM600.
|
|
|
Automation of brewhouse
Krykorka, Daniel ; Pásek, Jan (referee) ; Štohl, Radek (advisor)
Diploma thesis presents automatization of brewhouse in Ústecký Region. The first part of thesis describes beer brewing technology. Second describes changes made to the techno- logy and installation of remote service access. Further is discussed the implementation of algorithms in existing PLC, design of SCADA system including it’s implementation. The last part describes how commissioning was done, and further describes record of lautering.
|
|
|
Fasilities and comparison of SCADA systems in control systems
Vomela, Václav ; Weber, Martin (referee) ; Pásek, Jan (advisor)
This Bachelor’s thesis deals with the possibilities of SCADA systems in control systems with PLC, with a focus on software used atx - technical office for complete automation s.r.o., specifically InTouch, Web Control, WinCC Flexible, ProTool. At the beginning of this work obtain basic information about programmable logic, on what is a simulation and visualization. The next section is described the selected visualization software, the advantages, disadvantages, applications, etc. In the end is mentioned a brief overview and comparison of software.
|
|
| |
|
|
Theatre Stage Control System with Graphics Interface
Ševcovic, Jiří ; Španěl, Michal (referee) ; Zemčík, Pavel (advisor)
This thesis focuses on a control system for theater scenes. The system is based on technology of industrial computers and can handle theatre scene equipment, such as slot. The asynchronous AC engines and computer controlled frequency changers are used along with various sensors. The control is done via CANopen protocol and the software was written using Control Web.
|
|
|
Control and visualization of techlologic process via IPC
Buchta, Luděk ; Libor, Matys (referee) ; Dvořáček, Martin (advisor)
The aim of this bachelor’s thesis was to acquaint with techniques and technologies used in the control and visualization of technologic processes. The industrial PC, PLC and Automation Panels from the company B&R was used on control of the technologic process in laboratory E541. Designed and implemented control algorithm contains three discrete controllers. The standard OPC is used for communication. Visualization for control workplace is created in the Program Control Web. Visualizations for operator workstations are created in the program Automation Studio. These visualizations are used to transfer information from the technological process.
|
|
|
Application of InTouch system for control of portal crane
Diblíková, Michaela ; Jáneš, Pavel (referee) ; Pásek, Jan (advisor)
Bachelor thesis deals with creating software for control and visualization (SCADA) laboratory model gantry crane system using InTouch. Furthermore, the connection to the PLC model crane and a functional language program in STEP7. The aim is to create objects and windows for visualizacion and cotrol automatic functions crane. The work is shown and described a program created in STEP 7 language and program for the actual visualization and control model of the portal crane system in InTouch.
|
guest ::
